• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.27-32
• /
• 2010

추력 75톤급 액체로켓엔진용 터보펌프 조립체 실물형에 대하여 정격 회전수에서 성능시험이 수행되었다. 실매질 대신 상사매질을 사용하였는데 산화제펌프에는 액체질소, 연료펌프에는 물, 터빈에는 고온 공기가 공급되었다. 시험 중 터보펌프는 안정적으로 운전되었으며 성능 요구조건을 만족시켰다. 운전 초기의 회전수 상승구간에서도 펌프의 양정계수와 유량계수는 일정하게 유지되었다. 터보펌프 단품성능시험과 조립체 성능시험 결과를 비교할 때 펌프 양정계수와 터빈 효율이 두 종류의 성능시험에서 비교적 잘 일치하였다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.117-129
• /
• 2022

The downward discharge of the molten fuel to the lower structure of the fuel assembly could increase of the pressure drop and degrade of coolability of the assembly. To analyze the phenomena, experiments for the generation of the debris bed were conducted as LOF-DT series. Based on the debris bed in the LOF-DT, pressure drop experiment was conducted with intact and blocked component. Parametric study on the pressure drop was conducted by CFD. The LOF-DT experiments were conducted for the position and porosity of the debris bed. 85% of the debris were sedimented in the lower reflector, and 15% were in the nose piece, approximately. Porosity of the debris bed were about 0.7 and 0.85 in the lower reflector and nose piece, respectively. Pressure drop increased significantly with debris bed, especially in the lower reflector. More than 120 time of the pressure drop increased in the lower reflector, while only 10% increased in the nose piece. According to the parametric study, mass of the debris was the most important for pressure drop. The lower discharge phenomena could have a significant effect to the total pressure drop of the fuel assembly, approximately 10.8 times for the base case.

• Molecules and Cells
• /
• 제46권7호
• /
• pp.430-440
• /
• 2023

Linear ubiquitin chain assembly complex (LUBAC) is a ubiquitin E3 ligase complex composed of HOIP, HOIL-1L, and SHARPIN that catalyzes the formation of linear/M1-linked ubiquitin chain. It has been shown to play a pivotal role in the nuclear factor (NF)-κB signaling induced by proinflammatory stimuli. Here, we found that tumor susceptibility gene (TSG101) physically interacts with HOIP, a catalytic component of LUBAC, and potentiates LUBAC activity. Depletion of TSG101 expression by RNA interference decreased TNFα-induced linear ubiquitination and the formation of TNFα receptor 1 signaling complex (TNF-RSC). Furthermore, TSG101 facilitated the TNFα-induced stimulation of the NF-κB pathway. Thus, we suggest that TSG101 functions as a positive modulator of HOIP that mediates TNFα-induced NF-κB signaling pathway.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.740-745
• /
• 2005

Selective assembly is a method to find out appropriate matching pairs to be assembled to enhance the quality of the product. This study proposes an algorithm to select and match the components with two performance characteristics: at first, the number of matchable mates are calculated for each components. A matchable mate is defined to be the one of which the values of each performance characteristics lie in a rectangular mesh originated from the component under consideration. And the highest priority is given to the item with smallest number of matchable mates. The item of highest priority is matched to the one with smallest number of matchable mates among them. To find out the mates for the unmatched items, the mesh size is enlarged at the next iteration. Beginning with a small mesh, the procedure is repeated until the mesh covers the tolerance intervals of each performance characteristics. A VCR head case is analyzed.

• 산업공학
• /
• 제12권4호
• /
• pp.575-585
• /
• 1999

This study develops and operating software for a model plant. The model plant consists of an AS/RS system, two machining centers, an assembly line, and supplementary material handling equipments. Devices of each component are connected with the IBS RT24 DIO 16/16-T I/O module. Each I/O module communicates digital signals with the INTERBUS controller board via SUB-D 9 Connector cable. This study is a previous stage for developing an educational CIM software. Petri Nets is used for modelling the storage/retrieval of the AS/RS system, the flow of workpieces and the assembly line for parts. The operating software is coded with Microsoft Visual $C^{++}$ 5.0 and Interbus Library which is a software driver for the controller board. The operating software can be run on a MS Windows 95. Microsoft Access is used for the implementation of databases for BOM, AS/RS, and parts.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.6.2-6.2
• /
• 2011

Block copolymer (BCP) self-assembly in a film geometry has recently been the focus of increased research interest due to their potential use as templates and scaffolds for the fabrication of nanostructured materials. The phase behavior in a thin film geometry that confines polymer chains to the interfaces will be influenced by the interfacial interactions at substrate/polymer and polymer/air and the commensurability between the equilibrium period (L0) of the BCP and the total film thickness. We investigated the phase transitions for the films of block copolymers (BCPs) on the modified surface, like the order-to-disorder transition (ODT) by in-situ grazing incidence small angle x-ray scattering (GISAXS) and transmission electron microscopy (TEM). The selective interactions on the surface by a PS-grafted substrate provide the preferential interactions with the PS component of the block, while a random copolymer (PS-r-PMMA) grafted substrate do the balanced interfacial interactions on the surface. The thickness dependence of order-to-disorder behavior for BCP films will be discussed in terms of the surface interactions.

• 전산구조공학
• /
• 제9권1호
• /
• pp.47-54
• /
• 1996

원자로 내부구조물을 구성하고 있는 중요한 구조물 중의 하나인 제어봉집합체 보호구조물에 대한 랜덤진동의 응답을 구하였다. 제어봉집합체 보호구조물은 본래의 설계로부터 많은 설계변동이 있었고 이에 대하여 많은 우려가 제기되었던 바 본 논문에서는 정상상태에서의 랜덤하중에 대한 동적해석을 수행하여 그 응답을 구하였고 이들을 실험치와 비교, 검토하였으며 제어봉집합체 보호구조물이 구조적으로 안전함을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.304-310
• /
• 2006

A typical honeycomb sandwich panel consists of two thin, high-strength facings bonded to a thick, light-weight core. Each component by itself is relatively weak and flexible, but when it combined in a sandwich panel they produce a structure that is stiff, strong, and lightweight. To prove the suitability the honeycomb sandwich structure with prepreg, the mechanical properties of the skin materials and honeycomb sandwich structure were evaluated with the static strength tests. Accordingly, the honeycomb sandwich structure made by autoclave process is available for a panel on LCD/PDP assembly line.

• 산업공학
• /
• 제18권3호
• /
• pp.297-307
• /
• 2005

PCB assembly is a complicated and difficult process to optimize due to the necessity of simultaneous consideration of component’s rack assignment and board mounting sequencing. An efficient PCB assembly method is developed by using neighboring positioned identical components information as well as quantity and size of the components. It is found that same type of components are located closely each other by checking real PCBs and interviewing with PCB designers in practice. Better performance of the developed procedure is obtained along with more number of total components and more number of neighboring positioned identical components cases. Simulation models are developed using Visual C++ for performance evaluation purposes of the suggested heuristic.

• 산업경영시스템학회지
• /
• 제29권1호
• /
• pp.63-71
• /
• 2006

In this paper, we consider a planning problem arising from printed circuit board manufacturing industries. Given a set of several types of PCBs, component feeders and surface mounting machines in series in a PCB assembly line, the problem is to define the feeder allocation and job sequence with the objective of minimizing the total operation time of the line. We formulate the problem as a mathematical model. And, the problem is proven to be NP-hard, so a genetic algorithm is developed. Finally, we give test results to evaluate the performance of the genetic algorithm.