• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1923-1929
• /
• 2003

The present study investigated the microcirculation of blood in the left common artery (LCCA). In order to develop a mathematical model for microcirculation in LCCA, the present study adopted preexisted set of measured morphological data on anatomy, mechanical properties of the coronary vessels, viscosity of blood, the basic laws of physics, and the appropriate boundary conditions. In this study, the statistical distribution of blood pressure, blood flow, and blood volume in the LCCA were determined based on the anatomical branching pattern of the coronary arterial tree and the statistical data of blood vessel dimensions. Our calculations were in good agreement with the previous studies. The present results showed that the mean longitudinal pressure drop profile was function of the vessel order numbers. It was found that the normalized pressure drop was a logarithmic function of the compliance.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.101-112
• /
• 1987

Fracture toughness characterization in the transition region is examined for heat-treated and ionnitrided Ni-Cr-Mo steel. After heat treatment for the specimens of Ni-Cr-Mo steel, organizations of specimens-specimens which are heat-treated and ion-nitrided for 4 hours at 500 .deg. C and 5 torr in 25%N/dub 2/-75%H/sub 2/mixed gas-, hardness variety, and X-ray diffraction pattern of the ion-nitriding compound layer are observed. Fracture toughenss test of unloading compliance method were conducted over the regions from room trmperature to -70.deg. C. The compound layer was consisted of r'=Fe/sub 4/N phase and ion-nitrided layer's depth was 200mm from surface. The transition regions of heat-treated and ion-nitrided specimens were about -30.deg. C and -50.deg. C, respectively. The transition region of ion-nitrided specimens is estimated less than that of heat-treated one, and this is the effect of ion-nitriding.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.1
• /
• pp.141-152
• /
• 1999

The purpose of this study was to identify correlations among family support, self-esteem and compliance in preventive health behavior in elderly people. The results will provide valuable data for nursing interventions towards help the elderly lead better lives. Those who lived with elderly people in Kimchun were interviewed by the researcher and an assistant. The subjects were 191 elderly people over the age of 65. The study method used was a structured questionnaire and the data were collected from September 17th to September 31th in 1998. The tools for this study were the family support scale designed by Gang Hyun Sook, the self-esteem scale designed by Rosenberg and the preventive health behavior scale designed by Gang Yune Sook. The data were analyzed by the SAS program, Mean, SD, T-test, ANOVA, Pearson Correlation Coefficients. The results of this study are as follows : 1. The mean score for family support was 40.49. The score of family support of the elderly showed significant differences according to age(F=2.66, P<.05), spouse presence(t=4.20, P<.001), family pattern(F=4.56, P<.01), economic status (F=10.47, P<.001) and pocket money(F=10.46, P<.001). 2. The mean score for self-esteem was 29.01. The score of self-esteem of the elderly showed significant differences according to educational level(F=3.47, P<.01), spouse presence(t=2.49, P<.05), family pattern(F=3.79, P<.01), economic staus(F=15.65, P<.001) and pocket money(F=14.04, P<.001). 3. The mean score for compliance with preventive health behavior was 53.15. The score of compliance of preventive health behavior of the elderly showed significant differences according to economic status(F=9.34, P<.001) and pocket money(F=8.13, P<.001). 4. The relation between family support and self-esteem was significantly different(r=.57, P<.001). The relation between family support and compliance with preventive health behavior was significantly different(r=.44, P<.001). The relation between self-esteem and compliance with proventive health behavior was significantey different(r=.51, P<.001), In conclusion, the correlations among lamily support, self-esteem and compliance with preventive health behavior in elderly people showed significant differences.

• Korean Journal of Clinical Pharmacy
• /
• v.10 no.3
• /
• pp.111-119
• /
• 2000

The objective of this study was to evaluate the efficacy and the pattern of regimens prescribed for the treatment of peptic ulcer disease in a regional community hospital. 226 patients were treated as an outpatient and followed for one year. 88 patients $(38.9\%)$ had gastric ulcer (GU) alone, 6 patients $(2.7\%)$ had duodenal ulcer (DV) alone, 5 patients $(2.2\%)$ had gastroesophageal reflux disease (GERD) alone, 25 patients $(11.1\%)$ had both GU and DU, 88 patients $(38.9\%)$ had both GU and GERD, and 14 patients $(6.2\%)$ had both DU and GERD. During this study period no one was treated for Zollinger-Ellison Syndrome. The disease showed higher occurrence in male population (139 patients, $61.5\%$) and among the ages of 30 and 40 $(62.4\%)$. The average age of these patients was 41.3 years and there was no difference between the genders. $81.4\%$ of these patients underwent CLO test to check for the existence of Helicobacter and $66.3\%$ of these Patients showed the positive response. $65.6\%$ of patients with GU and $80\%$ of patients with DU showed the positive response and there was no difference between the genders $(65.4\%\;vs.\;67.6\%)$. 184 patients $(81.4\%)$ were deemed to be cured based on the disappearance of their symptoms after completing the regimens. Compliance rate did not differ for gender or different diseases, while showing a difference in age. Patients between the ages of 20 to 30 years old showed the worst compliance rate. In addition, the compliance was lower among the patients who had previous occurrence of the disease, and this was more evident among female patients. Although 184 patients out of the total 226 patients were deemed to be cured, 36 patients $(20.65\%)$ of these returned to the hospital for relapsed diseases within one year. The factors that affected for patients to relapse were the diseases accompanied by ulcer and social environments, such as smoking, alcohol consumption, and previous history of the diseases (smoking P<0.001, alcohol consumption P<0.02, previous history of disease P<0.05). The regimen using $H_2$ receptor antagonists+tripotassium dicitrato bismuthate+clarithromycin showed the lower rate of relapse, and the regimens of omeprazole (OMP)+amoxicillin+tripotassium dicitrato bismuthate and OMP+amoxicillin+metronidazole showed better compliance rate. Patient education by pharmacists on the importance of compliance to regimens and the risk factors fer relapse can provide a better patient care. This would ultimately result in more cost-effective treatments by preventing additional cost for treating relapsed symptoms in approximately $20\%$ of patients.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.254-259
• /
• 2005

The heat and vibration effect is known to cause a serious deformation in linear motor system. The paper presents a heat and vibration characteristics that compare a advanced linear motor with developed linear motor through experiment and analyses. The heat in linear motor system is identified for experimental data and analytic data using the Finite Volume Method (FVM). Also, it shows that the optimum standard analyzed the acceleration patterns of the moving part cause the vibration source in linear motor. It presents the analyzed dynamics of linear motor in compliance with a deformation of the non-linear factor.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2420-2426
• /
• 2015

This paper proposes an evolutionary optimization approach for optimal hopping of humanoid robots. In the proposed approach, the hopping trajectory is generated by a central pattern generator (CPG). The CPG is one of the biologically inspired approaches, and it generates rhythmic signals by using neural oscillators. During the hopping motion, the disturbance caused by the ground reaction forces is compensated for by utilizing the sensory feedback in the CPG. Posture control is essential for a stable hopping motion. A posture controller is utilized to maintain the balance of the humanoid robot while hopping. In addition, a compliance controller using a virtual spring-damper model is applied for stable landing. For optimal hopping, the optimization of the hopping motion is formulated as a minimization problem with equality constraints. To solve this problem, two-phase evolutionary programming is employed. The proposed approach is verified through computer simulations using a simulated model of the small-sized humanoid robot platform DARwIn-OP.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.34-41
• /
• 2001

More accurate and fast inspection method for mechanical parts and structure is required to guarantee the safety. Conventional methods using compliance method, eddy current method, ultrasonic wave, acoustic emission for non-destructive testing in mechanical parts and structure have been performed as the method of contact with objects to be inspected. With this reason these methods have been taken relatively much time, money, and manpower. In this study, in order to overcome these shortcomings, we used In-plane Electronic Speckle pattern Interferometry(In-plane ESPI) that was full-field measurement and noncontact method. We detected the cracks of the specimen at a real time and measured the length of the crack by using In-place ESPI system. Finally, we compared this results with conventional microscope method.

• 대한상한금궤의학회지
• /
• v.12 no.1
• /
• pp.137-147
• /
• 2020

Objective: In this study, we aimed to inform people that acne can be improved with Osuyu-tang (OSYT) based on the Shanghanlun disease pattern identification diagnostic system (DPIDS). Methods: We evaluated the progress of symptoms, patient compliance, and presence of side effects after the patient took OSYT. The progress of acne treatment was evaluated using the Korean Acne Grading System (KAGS), visual findings, and patient statements. Results: According to the DPIDS, the patient was diagnosed with provision 309 of soyinbing. After administration of OSYTfor 50 days, KAGS decreased from grade 3 to grade 1. Cold hands and feet improved significantly. Conclusions: Through this case study, we showed the possibility of the clinical interpretation and application of OSYT and suggested further case studies in the future.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.1
• /
• pp.88-100
• /
• 1990

Among the test methods to evaluate stress-corrosion cracking(SCC) on the basis of fracture mechanics, constant displacement(bolt) loading method using modified-WOL specimen is practically convenient. In this test method, compliance formula is generally required to calculate load(consequently $K_{ISCC}$). There are many problems in using the analytic compliance formula to calculate $K_{ISCC}$, so we had proposed the experimental $K_{ISCC}$ evaluation technique in the previous report. This study has employed the slightly altered configuration of modified-WOL specimen made of weldable structural stee(BS360-50D). With these specimens, stress-corrosion tests have been performed in $H_2S$ gas saturated 20% HCl solution. Through the test, the problems as mentioned earlier have been discussed again, and the proposed evaluation technique has been verified. And the stress-corrosion cracks and hydrogen blisters have been investigated in the initiation step with the aids of metallurgical micrographs, SEM fractographs, and EPMA analysis. The inclusions segregated in the mid-thickness region traps hydrogen to produce the hydrogen blistering. The applied or residual stress does not contribute the occurrence of the blister. Hydrogen absorbed into the mid-thickness region is consumed to produce the blistering so that stress-corrosion crack could hardly be detected at that region. The stress-corrosion cracks initiate from the inclusions and propagate in radial pattern. And the initiation site is remote from the crack tip and is inclined from the crack plane, which is assumed to be caused by the triaxial stress and the amount of the absorbed hydrogen.