• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.315-322
• /
• 2024

In this paper, we proposes real-time operating system based PCM encoder for telemetry system that must transmit frames within a set time. In the case of large aircraft, the complexity of the system is increasing because a lot of state information is measured from each sensor and peripheral device. In addition, as the amount measurement data increases, the role of PCM encoder to transmit frames within a set time is becoming important. Existing encoder is inflexible when changing specifications or implementing additional features. Therefore, a design is needed to supplement this. We propose a PCM encoder design applying uC/OS-II. In order to confirm the validity, a simulation was performed to measure the execution time of the task to confirm the performance.

• Journal of Korean Public Health Nursing
• /
• v.1 no.1
• /
• pp.45-61
• /
• 1987

This Study was an attempt to estimate the optimum numbers of Operating Room Nursing Manpower by measuring the amount of service hours required by the patients in Operating Room in relation to the service amount actually provided by the nurses. The major concern of this study was placed on the measurement of Nursing Service Requirements by using the Operating Room (O. R) Patient Acuity System recently developed by M. M. Hart to classify the O. R. patients into four groups according to the degree of the complexity of operative procedure and some other elements which increase nursing activities in respect of patient care; Acuity IV group is the one requires nursing services most, on the other hand Acuity I requires least. nu sing The objectives of this study were as follows; 1. To analyze functions of the nursing personnel in O. R. by time unit and to estimate the average time a nurse can activate for productive functions. 2. To measure the actual amount of nursing times provided by nurses to the surgical patients. 3. To develop a patient classification system in order to measure the amount of Nursing services required by the patients. 4. To calculate an appropriate number of nursing manpower to meet the needs of the patients. In order to conduct the research both selected nurses and patients in 'S' University Hospital were Studied by utilizing the O. R. Patient Acuity System as well as the Classification Chart developed by Association of Operating Room Nurses (A. O. R. N) as a means of classifying functions of O. R. nurses. That is; Functions of the 10 selected O. R. nurses observed during the period of June 30 to July 4, 1986, whereas the amount of nursing services required by or provided to the 974 patients who had received surgeries during the period of June 9 to July 4, 1986. The results of this study were as follows; 1) The actual working hours per a nurse averaged 6.7 hours a day. 2) Each nurse's daily routine schedule consists of $71.4\%$ for Technical Functions, $16.1\%$ for Nonprodective Functions, $6.6\%$ for Assessment and Evaluation, $3.9\%$ for Overseeing and Supervision and the rest $2.0\%$ for Patient Preparation respectively. 3) Preoperative waiting time per a patient was 24.1 minutes on the average; for the first case was 10.7 minutes, whereas for the following cases was 32.0 minutes. 4) Total Operation time for the 974 patients during the period of observation for this study amounted to 2759.6 hours, weekly hour was equivalent to 689.9 hours, Whereas daily operation time averaged 130 hours. Meanwhile the average operation time per patient was 2.8 hours ; for the case of Acuity IV was 5.6 hours, 5. 1 hours for the case of Acuity III, 2.3 hours for Acuity II and 1.1 hours for Acuity I. 5) According to the O. R. Patient Acuity System, $64.5\%$ of the whole patients belonged to Acuity II, $23.7\%$ to Acuity III, 11. $3\%$ to Acuity IV and $0.7\%$ to Acuity I respectively. 6) Required amount of nursing times based on the preoperative waiting time and operation time was 7167.8 person hours, which showed that $5.5\%$ of them needed for preoperative nursing care, whereas the rest $94.5\%$ for intraoperative nursing care. In terms of the O. R. Patient Acuity System, $49.7\%$ of total nursing service requirements was needed for Acuity II patients, $27.4\%$ for Acuity III patients, $17.2\%$ for Acuity IV patients and $0.2\%$ for Acuity I patients. 7) The rate of the nursing services provided against the required nursing times was about $81.4\%$ on the average; some departments, like those of Plastic Surgery, Otolaryngology and Ophthalmology whose patients mostly belonged to Acuity II recorded hegher provision rate than average, whereas other departments of Thoracic Surgery. Neurosurgery and Orthopedic Surgery whose patients belonged to Acuity III and Acuity IV as well as Acuity II recorded lower provision rate than average. 8) Subsequently, required numbers of nursing manpower was 10.7 nurses additionally. Based on the above findings the following recommendations will be made; 1) this study recommends, develops. and adopts an accurate and realistic O. R. Patient Acuity System which can help measure the nursing service requirements objectively to elicit the rationales of allocation of nursing personnels. 2) this study proposes storongly place nurses who take the role of preoperative nursing care exclusively for the waiting patients in O. R. and shortening their waiting time by close communication between the designated O. R. and the ward.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.67-84
• /
• 2010

In terms of business, forecasting is a work of what is expected to happen in the future to make managerial decisions and plans. Therefore, the accurate forecasting is very important for major managerial decision making and is the basis for making various strategies of business. But it is very difficult to make an unbiased and consistent estimate because of uncertainty and complexity in the future business environment. That is why we should use scientific forecasting model to support business decision making, and make an effort to minimize the model's forecasting error which is difference between observation and estimator. Nevertheless, minimizing the error is not an easy task. Case-based reasoning is a problem solving method that utilizes the past similar case to solve the current problem. To build the successful case-based reasoning models, retrieving the case not only the most similar case but also the most relevant case is very important. To retrieve the similar and relevant case from past cases, the measurement of similarities between cases is an important key factor. Especially, if the cases contain symbolic data, it is more difficult to measure the distances. The purpose of this study is to improve the forecasting accuracy of case-based reasoning approach using fuzzy relation and composition. Especially, two methods are adopted to measure the similarity between cases containing symbolic data. One is to deduct the similarity matrix following binary logic(the judgment of sameness between two symbolic data), the other is to deduct the similarity matrix following fuzzy relation and composition. This study is conducted in the following order; data gathering and preprocessing, model building and analysis, validation analysis, conclusion. First, in the progress of data gathering and preprocessing we collect data set including categorical dependent variables. Also, the data set gathered is cross-section data and independent variables of the data set include several qualitative variables expressed symbolic data. The research data consists of many financial ratios and the corresponding bond ratings of Korean companies. The ratings we employ in this study cover all bonds rated by one of the bond rating agencies in Korea. Our total sample includes 1,816 companies whose commercial papers have been rated in the period 1997~2000. Credit grades are defined as outputs and classified into 5 rating categories(A1, A2, A3, B, C) according to credit levels. Second, in the progress of model building and analysis we deduct the similarity matrix following binary logic and fuzzy composition to measure the similarity between cases containing symbolic data. In this process, the used types of fuzzy composition are max-min, max-product, max-average. And then, the analysis is carried out by case-based reasoning approach with the deducted similarity matrix. Third, in the progress of validation analysis we verify the validation of model through McNemar test based on hit ratio. Finally, we draw a conclusion from the study. As a result, the similarity measuring method using fuzzy relation and composition shows good forecasting performance compared to the similarity measuring method using binary logic for similarity measurement between two symbolic data. But the results of the analysis are not statistically significant in forecasting performance among the types of fuzzy composition. The contributions of this study are as follows. We propose another methodology that fuzzy relation and fuzzy composition could be applied for the similarity measurement between two symbolic data. That is the most important factor to build case-based reasoning model.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.83-88
• /
• 2015

Agricultural tractors are utilized on rough road such as rice paddy field. Therefore, static and dynamic load should be considered when simulating structural analysis with finite element analysis (FEA). But it consumes a lot of time and effort to measure dynamic load because of difficulty and complexity in modeling various field working load conditions and kinematics of machinery. In this paper, to reduce the efforts, 4-post road simulator is developed for agricultural tractor like modeling commercial vehicle. In proving ground test in our facility, I measured acceleration of front/rare axle and strain of body frame to validate input loads. The acceleration is used for defining input loads. And strain is validated with dynamics analysis including mode superposition method. As a result, I was able to calculate 4-post input road profiles, which represent similar proving ground profile with good reliability.

• Journal of The Korean Association of Information Education
• /
• v.24 no.2
• /
• pp.177-188
• /
• 2020

The purpose of this study was to examine the relationship between techno-stress perceived by elementary school teachers and related variables in a flipped learning environment. To achieve the purpose, the following research question have been established: First, what is the difference between techno-stress perceived by elementary school teachers? Second, what is the difference between techno-stress related variables perceived by elementary school teachers? Third, how do the TPACK, teacher effectiveness, and school environment support, perceived by elementary school teachers, affect technostress? 207 teachers at elementary school responded on a questionnaire to measure their perceived techno-stress, TPACK, teacher efficacy, and school environment support. Data were analyzed with using independent two-sample t-test, one-way ANOVA, and multiple regression analysis. The results were as follows: First, the elementary school teachers working on a leading school perceived higher techno-overload and techno-complexity more than those in ordinary school. Second, the elementary school teachers showed differences in the perception of TPACK, teacher efficacy, and school environment support according to the teacher's career, and leading school. Third, the elementary schools teachers perceived in TK, TCK, TPACK, educational support, and technology have a positive affect with techno-stress. The results are significant in that they provided data for reducing techno-stress of elementary school teachers in a flipped learning environment.

• Journal of Acupuncture Research
• /
• v.28 no.3
• /
• pp.131-142
• /
• 2011

Objectives : The primary purpose of this study was to examine the effect of manual acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ on normal human EEG (Electroencephalogram). And the secondary purpose of this study was to analyze the relationships between the change of EEG wave form using correlation analysis. Methods : 32 channel EEG measurement was carried out in 25 healthy participants (23 males and 2 females). EEG was measured for 21 minutes including 15 minutes of retention time. In this study, power spectrum was used as a measure of complexity. Statistical analysis was performed using Spearman correlation. Results : The results were as follows; 1. In C4, O1, Fz, Pz, Cz, FCz, CP4, FC4, TP7, FT7 among 32 electrodes, ${\delta}$, $\theta$ and ${\beta}$ wave increased during 0-3 time intervals, and especially in case of TP7, FT7 ${\alpha}$ wave spontaneously decreased during 12~15 time intervals in manipulation group. 2. Between $\theta$ and ${\beta}$ wave and $\theta$ and ${\delta}$ wave, there was statistically significant positive correlation in C4, O1, Fz, Pz, Cz, FCz, CP4, FC4, TP7, FT7 according to Spearman correlation analysis. 3. Between ${\alpha}$ and ${\beta}$ wave, there was statistically significant positive correlation in TP7, FT7 according to Spearman correlation analysis. Conclusions : These results suggest that TP7 and FT7 could be typical electrodes representing change of EEG after manipulated acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$. The relationships between the change of EEG wave form appear to have statistically significant positive correlation between $\theta$ and ${\beta}$ wave, $\theta$ and ${\delta}$ wave and ${\alpha}$ and ${\beta}$ wave.

• Journal of Biomedical Engineering Research
• /
• v.22 no.5
• /
• pp.425-430
• /
• 2001

The Purpose of this study was to find the way of discriminating EEG for some mental activity. which are not characterized within linear spectral analysis but with non-linear analysis . We lave investigated the way of characterizing EEG changes during emotional and cognitive states in healthy volunteered subjects who responded to three designed status. in which the subjects were relaxing with ease and eyes closed. listening to music and computing a simple subtraction with eyes closed. Especially, we estimated EEG dimensional complexity by Skinner s Point-wise correlation dimension(PD2) method for each mental states. As a result it has been found that the subjects, who responded that the\ulcorner had concentrated well during the arithmetic task. show higher PD2 in their non-linear EEG measures. in comparison with the subjects who responded that they had not concentrated during the task This highness of PD2 is also significant in statistical analysis. A subject who had the highest score in evaluating the intensity of induced emotion during emotional task shows significantly lower PD2 in statistical analysis than other subjects who had lower scores. Linear spectral analysis was also performed on these data. However, they did not show and significant difference. Only non-linear dynamical analysis shows the significant different result on these mental status.

• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.519-528
• /
• 2012

Voice activity detection (VAD) is generally conducted by extracting features from the acoustic signal and a decision rule. The performance of such VAD algorithms driven by the input acoustic signal highly depends on the acoustic noise. When video signals are available as well, the performance of VAD can be enhanced by using the visual information which is not affected by the acoustic noise. Previous visual VAD algorithms usually use single visual feature to detect the lip activity, such as active appearance models, optical flow or intensity variation. Based on the analysis of the weakness of each feature, we propose to combine intensity change measure and the optical flow in the mouth region, which can compensate for each other's weakness. In order to minimize the computational complexity, we develop simple measures that avoid statistical estimation or modeling. Specifically, the optical flow is the averaged motion vector of some grid regions and the intensity variation is detected by simple thresholding. To extract the mouth region, we propose a simple algorithm which first detects two eyes and uses the profile of intensity to detect the center of mouth. Experiments show that the proposed combination of two simple measures show higher detection rates for the given false positive rate than the methods that use a single feature.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.554-560
• /
• 2017

Accurate altimetry is required for the reliable flight control of drones or unmanned air vehicles (UAVs), and the radar altimeter is commonly used owing to its accuracy for the ground level. Due to the limitation for size, weight and power consumption, the frequency modulated continuous wave (FMCW) radar is appropriate for drone because it has lower complexity than that of pulse Doppler (PD) radar. Especially, fast-ramp FMCW radar, which transmits linear FM signal during very short period, is generally utilized, because it is robust for the ego-motion of drone. Therefore, we present the design and implementation results of the radar signal processor (RSP) for fast-ramp FMCW radar system. The proposed RSP was designed with Verilog-HDL and implemented with Altera Cyclone-IV FPGA device. Implementation results show that the proposed RSP includes 27,523 logic elements, 15,798 registers and memory of 138Kbits and can measure the altimeter at the rate of 100Hz with the operating frequency of 50MHz.

• Journal of Acupuncture Research
• /
• v.29 no.5
• /
• pp.1-16
• /
• 2012

Objectives : The purpose of this study was to examine the effects of manual acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ on Electroencephalogram(EEG) of patients with stroke. Methods : 32 channel EEG measurement was carried out in 35 Stroke patients(23 males and 12 females). EEG was measured for 21 minutes(made up of 7 sessions, 1 session means 3 minutes time interval) including 15 minutes(5 sessions) of acupuncture time. Power spectrum analysis was used as a measure of complexity. Statistical analysis was performed using Linear mixed model and DUNNETT's multiple comparison. Results : The results were as follows; 1. EEG amplitude was reduced during acupuncture except electrodes PG1 and PG2. 2. There was a notable change during 6~9 minutes after needling in ${\delta}{\cdot}{\beta}{\cdot}{\gamma}$ wave, and during 6~9 minutes after needling in ${\Theta}{\cdot}{\alpha}$ wave. Overall, during 6~9 minutes after needling. 3. TP8 is a common significant electrode among five wave forms. Conclusions : These results suggest that TP8 could be typical electrodes and change of EEG compared to baseline happens most often during 6~9 minutes after manipulated acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ of patients with stroke.