• Title/Summary/Keyword: Complex building

Search Result 1,587, Processing Time 0.032 seconds

Characteristics and Reasonable Management Approaches of Coastal Reclamation in Korean (우리나라 연안매립의 특성 및 합리적 관리방안)

  • Eom, Ki-Hyuk;Lee, Dae-In;Kim, Young-Tae;Kim, Gui-Young
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.15 no.3
    • /
    • pp.227-237
    • /
    • 2012
  • This paper analyzes the current status, characteristics, and problems of coastal reclamation in Korea and suggests effective management approaches. Reclamation is concentrated from the West Sea to the South Sea. In the 1980s and 1990s, most projects were intended for agricultural use, whereas in recent years reclamation for industrial and harbour sites(e.g., ship-building) have been increasing. The continuous onslaught of reclamation and development projects threatens the coastal environment, especially tidal flats and fishing areas, and fishery production has been reduced in some areas. The largest tidal flats have been used for dumping sites of dredged coastal sediments, urban development projects, and industrial complex composition. Thus, it is necessary to assess current policy using top-down approaches after establishing appropriate directions and standards for coastal management. Both short-term development profits and long-term conservation should be considered when attempting to balance development and conservation. In addition, improvements of marine environmental impact assessment and in the legal system are necessary.

A Study on the Analysis of Urban Highways Traffic Accident's Impact Factors Based on Building Discriminant Models - In Busan Metropolitan City - (판별모델 구축에 따른 도시고속도로의 교통사고 영향요인 분석에 관한 연구 - 부산지역 사례를 중심으로 -)

  • Jeong, Yong-Hwa;Choi, Yang-Won
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.34 no.4
    • /
    • pp.1269-1278
    • /
    • 2014
  • The urban highway, which is a motorway constructed to solve traffic issues, has the characteristic of extremely high damage to life during traffic accidents because the speed of vehicles is higher than typical roadways. In particular, because traffic accidents involving serious injuries hold a very important place among overall traffic accidents, analysis on factors affecting the occurrence of traffic accidents involving serious injuries must be considered with priority when establishing a reduction measure. Therefore, the study built a model that was capable of distinguishing the degree of the factors as part of microscopic analysis for investigating the complex effect of many elements concerning the occurrence of traffic accidents involving serious injuries in urban highways. The results are as follows. First, discriminant model showed a comparatively high level in overall accuracy rates, and, considering the correlation ratio, the models were determined to be valid, as all characteristics of the factors were clearly distinguished. Second, the problems of traffic accidents involving serious injuries on urban highways according to each factor, were clearly drawn out through the discriminant model. Third, the improvement measure for the problems drawn out from the discriminant models were clearly proposed.

The Comparison of Various Turbulence Models of the Flow around a Wall Mounted Square Cylinder (벽면에 부착된 사각 실린더 주변 유동에 대한 난류모델 비교연구)

  • Bae, Jun-Young;Song, Gi-Su
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.4
    • /
    • pp.419-428
    • /
    • 2020
  • The flow past a wall mounted square cylinder, a typical and basic shape of building, bridge or offshore structure, was simulated using URANS computation through adoption of three turbulence models, namely, the k-ε model, k-ω model, and the v2-f model. It is well known that this flow is naturally unstable due to the Karman vortex shedding and exhibits a complex flow structure in the wake region. The mean flow field including velocity profiles and the dominant frequency of flow oscillation that was from the simulations discussed earlier were compared with the experimental data observed by Wang et al. (2004; 2006). Based on these comparisons it was found that the v2-f model is most accurate for the URANS simulation; moreover, the k-ω model is also acceptable. However, the k-ε model was found to be unsuitable in this case. Therefore, v2-f model is proved to be an excellent choice for the analysis of flow with massive separation. Therefore, it is expected to be used in future by studies aiming to control the flow separation.

Mapping Technique for Flood Vulnerable Area Using Surface Runoff Mechanism (지표유출메커니즘을 활용한 홍수취약지구 표출 기법)

  • LEE, Jae-Yeong;HAN, Kun-Yeun;KIM, Hyun-Il
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.22 no.4
    • /
    • pp.181-196
    • /
    • 2019
  • Floods can be caused by a variety of factors, and the main cause of floods is the exceeding of urban drainage system or river capacity. In addition, rainfall frequently occurs that causes large watershed runoff. Since the existing methodology of preparing for flood risk map is based on hydraulic and hydrological modeling, it is difficult to analyse for a large area because it takes a long time due to the extensive data collection and complex analysis process. In order to overcome this problem, this study proposes a methodology of mapping for flood vulnerable area that considered the surface runoff mechanism. This makes it possible to reduce the time and effort required to estimate flood vulnerabilities and enable detailed analysis of large areas. The target area is Seoul, and it was confirmed that flood damage is likely to occur near selected vulnerable areas by verifying using 2×2 confusion matrix and ROC curve. By selecting and prioritizing flood vulnerable areas through the surface runoff mechanism proposed in this study, the establishment of systematic disaster prevention measures and efficient budget allocation will be possible.

Vitalization Strategy Research of Private Modern Dance Organizations: Centered on The Importance of Experts and Urgency Assessment (민간 현대무용단의 활성화 전략 연구: 전문가 중요도 및 시급성 평가를 중심으로)

  • Kim, Gyu-Jin
    • Journal of Digital Convergence
    • /
    • v.18 no.11
    • /
    • pp.527-538
    • /
    • 2020
  • This research measures the urgency and importance listening to experts' opinions as a proposal for vitalization of folk modern dance groups. Firstly, the open type FGI(Focus Group Interview) was implemented for five groups of an expert by applying the new industry foster theory, and total 24 types of second questionnaire were developed through importantly referred or repeated contents. They were distributed to 20 people including a dance group representative, a planner, a university professor and etc to measure experts' importance and urgency. In the research result, For big list, Financial aid for both importance and urgency appear first, and for comparative analysis of importance and urgency for small list, differences in infrastructure construction are shown. "expansion of dance program's advertisement channels" and "rank 1" appeared in "Secure space for dancers". Suggestions for analyzing such results are as follows. It is shown that "detailed financial aid for the operation of dance groups" and etc in the aspect of financial aid, "the employment of professional human resources including design and producing etc" in that of performance and education related production development, "training a dancer who can assimilate a complex genre" in that of manpower training, "arrangement of exclusive space for a dance group" in that of infrastructure building, and "the employment of professional human resources including design and producing etc" in that of consulting support are important and urgent matters considered by experts.

Test and Analysis on the Transverse Gusset Plate Connection to Circular Hollow Section(CHS) of High Strength (고강도 원형강관의 직각방향 거셋플레이트 접합부 실험 및 해석)

  • Lee, Swoo-Heon;Shin, Kyung-Jae;Lee, Hee-Du;Kim, Woo-Bum
    • Journal of Korean Society of Steel Construction
    • /
    • v.24 no.2
    • /
    • pp.163-173
    • /
    • 2012
  • A connection composed of a circular hollow structural section (HSS) has complicated details, and exhibits a very complex local deformation when it reaches the yield stress. Given these circumstances, proposing a simple design equation considering local deformation is difficult. The design equations of the Korea Building Code (KBC 2009) for HSS joints are simple and are very similar to those of the AISC. These design equations limit the maximum yield stress up to 360MPa and yield ratio (yield strength/tensile strength) up to 0.8. This means that the material with yield strength exceeding 360MPa could be used after verification based on the test or rational analysis for the similar connection. This paper introduces an experimental program and finite element analysis (FEA) for the circular hollow section (CHS) with a transverse gusset plate made of high-strength steel (HSB600) or structural steel (SS400) when the joints are subjected to lateral force. Comparison of the design equations with the results of FEA and test may be used for the modification of the design equations.

Deterrent Strategy in the era of North Korea's WMD and Missile Threats : Challenges and the Ways to go (북 핵·미사일 시대의 억제전략 : 도전과 나아갈 방향)

  • Lee, Sang-Yup
    • Strategy21
    • /
    • s.41
    • /
    • pp.232-260
    • /
    • 2017
  • The purpose of this paper is to open a debate about what kind of deterrent strategy the ROK military should pursue in the era of NK's weapons of mass destruction and missile threats. I argue that the ROK military needs a comprehensive deterrent strategy that reflects the international security situations and trends and that builds on clear understanding of the basic concepts and how deterrence operates. The paper starts with surveying the basic knowledge of deterrence from the perspectives of both theory and practice. Then, it provides explanations on why deterrence against NK can be particularly difficult given the security environment in and around the Korean peninsula. For example, South Korea and North Korea hardly share 'common knowledge' that serves as a basic element for the operation of deterrence. Deterrence against North Korea involves complex situations in that both deterrence and compellence strategies may be relevant particularly to North Korea's WMD and missile threats. It also involves both immediate and general deterrence. Based on the discussion, I suggest several ideas that may serve as guidelines for establishing a deterrent strategy against NK. First, our threats for deterrence should be the ones that can be realized, particularly in terms of the international norms. In other words, they must be considered appropriate among other nations in the international community. Second, there should be separate plans for the different kinds of threats: one is conventional, local provocations and the other is WMD/missile related provocations. Third, we should pursue much closer cooperative relations with the U.S. military to enhance the effectiveness of immediate deterrence in the Korean peninsula. Fourth, the ROK military should aim to accomplish 'smart deterrence' maximizing the benefits of technological superiority. Fifth, the ROK military readiness and structure should be able to deny emerging North Korean military threats such as the submarine-launched ballistic missiles and intercontinental ballistic missiles. Lastly, in executing threats, we should consider that the current action influences credibility and reputation of the ROK, which in turn affect the decisions for future provocations. North Korea's WMD/missile threats may soon become critical strategic-level threats to South Korea. In retrospect, the first debate on building a missile defense system in South Korea dates back to the 1980s. Mostly the debate has centered on whether or not South Korea's system should be integrated into the U.S. missile defense system. In the meantime, North Korea has become a small nuclear power that can threaten the United States with the ballistic missiles capability. If North Korea completes the SLBM program and loads the missiles on a submarine with improved underwater operation capability, then, South Korea may have to face the reality of power politics demonstrated by Thucydides through the Athenians: "The strong do what they have the power to do, the weak accept what they have to accept."

Micro-silica Mixed Aqua-epoxy for Concrete Module Connection in Water : Part 2 - Structural Application and Evaluation (해상 프리캐스트 콘크리트 부유체 모듈 가접합을 위한 마이크로 실리카 혼입 수중용 에폭시 접합 성능 검토 : Part 2 - 구조 접합 성능 평가)

  • Choi, Jin-Won;You, Young-Jun;Jeong, Youn-Ju;Kwon, Seung-Jun;Kim, Jang-Ho Jay
    • Journal of the Korea Concrete Institute
    • /
    • v.27 no.1
    • /
    • pp.29-35
    • /
    • 2015
  • Recent studies to develop Very Large Floating Structure(VLFS) has shown that the construction procedure of the structure needs to acquire precast concrete module connection system using prestressing. However, the loads occurring on water are complex combinations of various condition, so the safe and stable performance of the module joints and bonding materials are key to the success of the construction. Therefore, micro-silica mixed aqua-epoxy development was introduced in Part 1 using a bonding material developed in this study. The performance of the micro-silica mixed aqua-epoxy(MSAE) applied joint of concrete module specimens connected by prestressing tendon was evaluated to verify the usability and safety of the material. RC beam, spliced beam connected by prestressing tendon and MSAE, and continuous prestressed concrete beam were tested for their initial cracking and maximum loads as well as cracking procedure and pattern. The results showed that the MSAE can control the stress concentration effect of the shear key and the crack propagation, and the maximum load capacity of MSAE joint specimens are only 5% less than that of continuous RC specimen. The details of the study are discussed in detail in the paper.

A Model for Radiological Dose Assessment in an Urban Environment (도시환경에서 방사성물질 오염에 따른 선량평가모델)

  • Hwang, Won-Tae;Kim, Eun-Han;Jeong, Hyo-Joon;Suh, Kyung-Suk;Han, Moon-Hee
    • Journal of Radiation Protection and Research
    • /
    • v.32 no.1
    • /
    • pp.1-8
    • /
    • 2007
  • A model for radiological dose assessment in an urban environment, METRO-K has been developed. Characteristics of the model are as follows ; 1) mathematical structures are simple (i.e. simplified input parameters) and easy to understand due to get the results by analytical methods using experimental and empirical data, 2) complex urban environment can easily be made up using only 5 types of basic surfaces, 3) various remediation measures can be applied to different surfaces by evaluating the exposure doses contributing from each contamination surface. Exposure doses contributing from each contamination surface at a particular location of a receptor were evaluated using the data library of kerma values as a function of gamma energy and contamination surface. A kerma data library was prepared fur 7 representative types of Korean urban buildings by extending those data given for 4 representative types of European urban buildings. Initial input data are daily radionuclide concentration in air and precipitation, and fraction of chemical type. Final outputs are absorbed dose rate in air contributing from the basic surfaces as a function of time following a radionuclide deposition, and exposure dose rate contributing from various surfaces constituting the urban environment at a particular location of a receptor. As the result of a contaminative scenario for an apartment built-up area, exposure dose rates show a distinct difference for surrounding environment as well as locations of a receptor.

GIS Component Extraction Method (GIS 컴포넌트 추출기법)

  • Park, Tae-Og;Kim, Kye-Hyun
    • Journal of Korea Spatial Information System Society
    • /
    • v.4 no.2 s.8
    • /
    • pp.65-74
    • /
    • 2002
  • The CBD(component based development) method has recently been on the rise as the main current among all fields of developing Information Systems. The developing system by building and integrating of components is encouraged in GIS sphere. Business domain which considerably identifies components occupies GIS shpere rather then any other sphere. Arithmetic function is quite needed in GIS sphere but non-arithmetic functions are also used in GIS sphere as well as in enterprise sphere. Component is characterized by ensuring the reuse of itself. The efficiency of reusing component is promoted as the component is functionally simple and is packed to a minimum. The GIS Component Extraction Method has already been presented in several studies but this study is about the GIS Component Extraction by the Affinity Analysis Method. CBD uses UML on a basis and the core of the UML is consisted of the use case and the class. The purpose of the Affinity Analysis is a study how relate between the use case and the class in a certain business domain and then the results identify the component. The Affinity Analysis is useful not only in GIS but also in every business domain and is considered to be popular as the procedure of this method is not complex at all.

  • PDF