• Journal of Animal Environmental Science
• /
• v.11 no.2
• /
• pp.97-102
• /
• 2005

Anaerobic decomposition is one of the most common processes in nature and has been extensively used in waste and wastewater treatment for several centuries. New applications and system modifications continue to be adapted making the process either more effective, less expensive, or suited to the particular waste in question and the operation to which it is to be applied. Animal manure is a highly biodegradable organic material and will naturally undergo anaerobic fermentation, resulting in release of noxious odors, such as in manure storage pits. Depending on the presence or absence of oxygen in the manure, biological treatment process may be either aerobic or anaerobic. Under anaerobic conditions, bacteria carry on fermentative metabolisms to break down the complex organic substances into simpler organic acids and then convert them to ultimately formed methane and carbon dioxide. Anaerobic biological systems for animal manure treatment include anaerobic lagoons and anaerobic digesters. Methane and carbon dioxide are the principal end products of controlled anaerobic digestion. These two gases are collectively called biogas. The biogas contains $60\~70\%$ methane and can be used directly as a fuel for heating or electrical power generation. Trace amounts of ammonia and hydrogen sulfide ($100\~300\;ppm$) are always present in the biogas stream. Anaerobic lagoons have found widespread application in the treatment of animal manure because of their low initial costs, ease of operation and convenience of loading by gravity flow from the animal buildings. The main disadvantage is the release of odors from the open surfaces of the lagoons, especially during the spring warm-up or if the lagoons are overloaded. However, if the lagoons are covered and gases are collected, the odor problems can be solved and the methane collected can be used as a fuel. Anaerobic digesters are air-tight, enclosed vessels and are used to digest manure in a well-controlled environment, thus resulting in higher digestion rates and smaller space requirements than anaerobic lagoons. Anaerobic digesters are usually heated and mixed to maximize treatment efficiency and biogas production. The objective of this work was to review a current anaerobic biological treatment of animal manure for effective new technologies in the future.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.1-12
• /
• 2016

The current economic crisis is making new demands on manufacturing industry, in particular, in terms of the flexibility and efficiency of production processes. This requires production and administrative processes to be meshed with each other by means of IT systems to optimise the use and capacity utilisation of machines and lines but also to be able to respond rapidly to wrong developments in production and thus to minimise adverse impacts on the business. The future scenario of the "smart factory" represents the zenith of this development. The factory can be modified and expanded at will, combines all components from different manufacturers and enables them to take on context-related tasks autonomously. Integrated user interfaces will still be required at most for basic functionalities. The complex control operations will run wirelessly and ad hoc via mobile terminals such as PDAs or smartphones. The comnination of IoT, and Big Data optimisation is bringing about huge opportunities. these processes are not just limited to manufacturing, anywhere a supply chain environment exists can benefit from information provided by linked devices and access to big data to inform their decision support. Building a smart factory with smart assets at its core means reaching those desired new levels of productivity and efficiency. It means smart products that leverage advanced traceability, connectivity and intelligence. For businesses, it means being able to address the talent crunch through more autonomous. In a Smart Factory, machinery and equipment will have the ability to improve processes through self-optimization and autonomous decision-making.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.1010-1017
• /
• 2013

Current global textiles and fashion industries have gradually shifted focus to high value-added, high sensibility, and multi-functional products based on new human-friendliness and sustainable growth technologies. Textile design CAD systems have been developed in conjunction with computer hardware and software sector advances. This study compares the patterns or images of actual woven fabrics and virtual fabrics prepared with a textile design CAD system. In this study, several weave structures (such as fancy yarn weave and patterns) were prepared with a shuttle loom. The woven textile images were taken using a CCD camera. The same weave structure data and yarn data were fed into a textile design CAD system in order to simulate fabric images as similarly as possible. Similarity Index analysis methods allowed for an analysis of the index between the actual fabric specimen and the simulated image of the corresponding fabric. The results showed that repeated small pattern weaves provide superior similarity index values than those of a fancy yarn weave that indicate some irregularities due to fancy yarn attributes. A Complex Wavelet Structural Similarity(CW-SSIM) index resulted in a better index than other methods such as Multi-Scale(MS) SSIM, and Feature Similarity(FS) SSIM, across fabric specimen images. A correlation analysis of the similarity index based on an image analysis and a similarity evaluation by panel members was also implemented.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.3
• /
• pp.252-272
• /
• 2017

Fuel cell systems have to satisfy acceptable operating reliability, sufficient lifetime and price to enter the market in competition with existing products. Fuel cells are made up of complex element technologies and various problems related to the failure of the components can affect the reliability and safety of the system. This problem can be overcome by introducing a monitoring and supervisory control system in addition to automatic control to detect the failure of the fuel cell quickly and properly diagnose the performance degradation. For the fault detection and diagnosis of polymer electrolyte fuel cells, the model based method using the theoretical superposition value and the non-model based method of checking the signal tendency or the converted signal characteristic can be applied. The methods analyzed in this paper can contribute to the development of integrated monitoring and control technology for the whole system as well as the stack.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.59-69
• /
• 2018

The up-to-date business environment for Korean manufacturers is very complex and rapidly changing. Especially, the companies have faced with various changes derived from small quantity batch production, diversification of customer demands, and short life cycles of products. Consequently, the Korean manufacturing companies are in need of more efficient production planning and scheduling techniques. In this paper, the research trend of scheduling techniques is investigated to provide relevant information to researchers in this field. Furthermore, some implications for future researches are presented regarding literatures published in Korea over the last 10 years. This paper presents an entire investigation into Korean research works on scheduling (2,569 papers) that are published from 2007 to 2016. Especially, detailed analysis was carried out in the following three industry : 1) semiconductor, 2) shipbuilding and 3) automobile. In this paper, approaches to scheduling presented in the literature are categorized into the following three categories : 1) application, 2) algorithm, and 3) simulation modeling. First, in the semiconductor industry, scheduling techniques related to semiconductor cleaning processes, photolithography processes, chemical processes, transport and transport equipment have been found to be dominant. Second, the shipbuilding industry is focused on assembly processes, transporter, crane and various existing production management system. On the other hand, the scheduling research of the automobile industry is mainly focused on the vehicle movement routing and procurement supply-chain planning algorithm in terms of logistics. The conclusion of this study are expected to provide many implications for various types of academic and practical follow-up studies related to scheduling in consideration of main characteristics of semiconductor, shipbuilding and automobile industries.

• The Plant Pathology Journal
• /
• v.28 no.2
• /
• pp.123-136
• /
• 2012

Diseases caused by begomoviruses (family Geminiviridae, genus Begomovirus) constitute a serious constraint to tropical and sub-tropical agro-ecosystems worldwide. In recent years, they have also introduced in temperate regions of the world where they have great impact and are posing a serious threat to a variety of greenhouse crops. Begomoviral diseases can in extreme cases reduce yields to zero leading to catastrophic losses in agriculture. They are still evolving and pose a serious threat to sustainable agriculture across the world, particularly in tropics and sub-tropics. Till recently, there have been no records on the occurrence of begomoviral disease in South Korea, however, the etiology of other plant viral diseases are known since last century. The first begomovirus infected sample was collected from sweet potato plant in 2003 and since then there has been gradual increase in the begomoviral epidemics specially in tomato and sweet potato crops. So far, 48 begomovirus sequences originating from various plant species have been submitted in public sequence data base from different parts of the country. The rapid emergence of begomoviral epidemics might be with some of the factors like evolution of new variants of the viruses, appearance of efficient vectors, changing cropping systems, introduction of susceptible plant varieties, increase in global trade in agricultural products, intercontinental transportation networks, and changes in global climatic conditions. Another concern might be the emergence of a begomovirus complex and satellite DNA molecules. Thorough understanding of the pathosystems is needed for the designing of effective managements. Efforts should also be made towards the integration of the resistant genes for the development of transgenic plants specially tomato and sweet potato as they have been found to be widely infected in South Korea. There should be efficient surveillance for emergence or incursions of other begomoviruses and biotypes of whitefly. This review discusses the general characteristics of begomoviruses, transmission by their vector B. tabaci with an especial emphasis on the occurrence and distribution of begomoviruses in South Korea, and control measures that must be addressed in order to develop more sustainable management strategies.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.2
• /
• pp.22-29
• /
• 2020

Among many fire-related laws and standards such as fire protection, fire doors are important facilities that play a role in preventing the spread of fire and smoke in the event of fire, thereby minimizing human casualties. Accordingly, the standards for performance required by applicable laws and regulations and related enforcement rules and notices have been continuously raised and the corresponding performance must be secured. However, due to the shortcomings of the relevant laws and systems, the test results of the fire doors confirmed that there was a risk of passing products. In this study, the criteria for fire-related performance were analyzed, and the performance required by other laws, in addition to simple fire protection, was identified, the criteria were organized, and the complex performance required was clearly.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1122-1127
• /
• 2003

For many years, engineers in the field of acoustics have used the A-weighted sound pressure level (SPL). Since they were interested just in a reduction of noise, the A-weighted SPL was considered good enough to quantify noise problems. This is reasonable because loudness is usually the most important parameter for most noise problems and A-weighted SPL is often reasonably well correlated with loudness. As the overall noise levels drop, however, other parameters become more important and must be considered, Advent of sound quality came from an understanding that A-weighted SPL only reflects the loudness of a sound. It is obviously impossible to characterize a complex sound with a single number. Although product mostly has revealed physical quantities created by the standpoint of engineers, consumers perceive and evaluate products on the non-physical characteristics, such as feelings, emotions, and experiences in different social and cultural situations. Especially, for the household appliances for instance air-conditioner or refrigerator, the sound is heavily related to the satisfaction of a customer who is a real user of the product and is very important factor to decide purchasing as well as visual design. Therefore, in this research, the general tendency of consumer's psychology was investigated for the appliances. And also, in order to obtain clear guidelines fur sound manipulation, the characteristics of the sound of air-conditioning systems and refrigerators were compared with competitors'. since it is important to overcome the discrepancy between engineering and marketing, the relevance of sound manipulation must be documented from the consumer's perspective. That is the reason why we conducted a consumer and marketing oriented study.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.939-949
• /
• 2006

With the development of industry, product data management system is becoming more and more important. An expanded view of product definition function that include a bill of material and routing database, current and historical engineering data and specifications and engineering changes order history. PDM (Product Data Management) systems hold and manage such material as product specifications, plans, geometric models, CAD drawings and images. Furthermore, PDM enables companies producing complex products to spread product data in to the entire launch process. Especially, PDTnet XML Schema is an international standard for exchanging of PDM data. But PDTnet XML Schema differs from existing XML Schema in the way that its property of IDREF/IDREFS is irregular. Therefore it is important factor that. what do we use storage devices and storage techniques. We developed storage techniques and application supporting various query types and preserving PDTnet XML Schema using a relational database that guaranteeing the performance nowadays. In this paper, we will show that our storage techniques minimize repeated data and optimize query processing by using application comparison with storage techniques of existing XML Schema data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.549-561
• /
• 2005

As Internet and network technologies have been developed, e-commerces are getting more complex and more various. This paper, for meta-data and data exchange between heterogeneous database systems, uses XML schema proposed in W3C, and XML schema can present meta-data and data of relational database system as XML document format which is structural. It supports various primitive data formats, so that it uses the structure which reflects adequately data formats which relational database system offered. However, current e-commerces use heterogeneous platforms, so difficulties that is mutual interchange and management exist. For the solution for these problems, a standard ontology which defines relations of product classifications and the standard of property expression and the location ontology which offers e-commerce's information about products are constructed. Applying these ontology information to search system, by offering information which customers need efficient search is performed. Combining these ontologies and product classification category information, called XMDR, this XMDR is introduced into product search system, so this paper proposes to construct ontology server method for efficient search.