• International Journal of Advanced Culture Technology
• /
• 제5권3호
• /
• pp.1-10
• /
• 2017

In this paper, we examine the points of similarity and difference between Korea, Japan, and the USA in terms of the spin-off effects of space technology on cultural life. In Japan and the USA, spin-off effects of space development research by government funded research centers are diffusive while in Korea they are interruptive. Spin-offs of research results impact cultural life via technology transfer and commercialization in businesses. This is because the Korean aerospace industry has progressed largely based on an overall system, but the promotion of internal parts and sub-systems, which can trigger technological development and spin-off effects in manufacturing, has been neglected. In the case of the KARI, the government funded research center, we argue that it is necessary for KARI to devote more resources to transfer (or promote spin-offs of) space technology to small and medium-sized businesses and other industries.

• 소성∙가공
• /
• 제5권4호
• /
• pp.305-319
• /
• 1996

In this paper a finite element based system is presented for the prediction of the distributions of the recrystallized grain sizes in the workpiece in hot forging. The system adopts a fully coupled finite element thermo-mechanical model for predicting plastic deformation and heat transfer occurring in the workpiece and employs existing metallurgical models relating the recrystalliza-tion behavior with the thermo-mechanical variables such as temperatures strain and strain rate. The system is applied to upsetting of cylindrical preform. The predicted grain sizes are compared with the measurements. It is further applied to forging of a complex-shaped product.

• 소성∙가공
• /
• 제13권7호
• /
• pp.594-599
• /
• 2004

In the sheet metal forming operations, the strain measurement of sheet panel is an essential work which provides the formability information needed in die design, process design, and product inspection. To measure efficiently complex geometry strains, the 3-dimensional automative strain measurement system, which theoretically has a high accuracy but practically has about 3～5％ strain error, is often used. For eliminating the strain error resulted in measuring the strains of formed panels using an automated strain measurement system, the position error calibration method is suggested, which computes accurate strains using the grids with accurate nodal coordinates. The accurate nodal coordinates are calculated by adding the nodal coordinates measured by the measurement system and the position error found using the multiple regression method as a function of the main error parameters obtained from the analysis of strain error in a standard cube. For the verification, the strain distributions of square and dome cups obtained from the position error calibration method are compared with those provided by the finite element analysis and ASAME.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.35-40
• /
• 2017

A most important progress in civilization was the introduction of mass production. One of main methods for mass production is die-casting molds. Due to the high velocity of the liquid metal, aluminum die-casting is so complex where flow momentum is critical matter in the mold filling process. Actually in complex parts, it is almost impossible to calculate the exact mold filling performance with using experimental knowledge. To manufacture the lightweight automobile bodies, aluminum die-castings play a definitive role in the automotive part industry. Due to this condition in the design procedure, the simulation is becoming more important. Simulation can make a casting system optimal and also elevate the casting quality with less experiment. The most advantage of using simulation programs is the time and cost saving of the casting layout design. For a die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize the casting layout design of an automotive Oil Pan_BR2E, Computer Aided Engineering (CAE) simulation was performed with three layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the filling process with three models, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflows. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system.

• 웰빙융합연구
• /
• 제5권4호
• /
• pp.51-56
• /
• 2022

Purpose: By applying an ultrasonic mechanical device to the liquid fertilizer storage in the pig dropping treatment plant, the initial odor of the odor source is reduced, and the air dilution drainage of the complex odor is fundamentally recognized to facilitate odor treatment on the mechanical and chemical biological treatment devices at the rear. Research design, data and methodology: The odor concentration on the site boundary was measured to confirm the state of reduction. In order to prevent the spread of odor from the collection of the pig dropping treatment plant, it was measured by installing an ultrasonic generator inside the installation wall after installing the sealing wall. Results: The average value of the March and April measurement data remained close to neutral at 8.2 after 8.6 treatment before pH treatment, decreased 97.3% from 462 mg/L before SS treatment to 10.5 mg/L after treatment, and the composite odor was reduced by 85% from 20 to 3 before treatment. It was confirmed that ammonia (NH3) was reduced by 99% from 5.8 ppm to 0.09 ppm, and general bacteria were also reduced by 99% from 3,200 CFU/mL to 57 CFU/mL Conclusion: Applying the ultrasonic air ejector hybrid system and zigzag air complex module development product to resource circulation centers or sewage treatment facilities is thought to reduce inconvenience to residents due to odors caused.

• KSBB Journal
• /
• 제11권4호
• /
• pp.411-419
• /
• 1996

본 연구에서는, 최근 들어 관심의 대상이 되어 의 품 산업에 응용의 수가 늘고 있는 cyclodextrin을 이용하여 세포밖으로 배출된 식물세포 2차 대사물질을 신속히 포획하여 생산수율을 증대시키고자 하였다. 실험결과 양귀비 현탁배양에서 a-, y-cyclodex trin보다는 ${\beta}$-cyclodextrin이 benzophenan-thridine alkaloid를 생산하는데 더 효과적업을 알았다. 이때 ${\beta}$-cyclodextrin의 optimum concentration이 존재하였는데, 그 농도는 현탁배양배지의 1.5% (w/v) 부 근에서였다. 고체 배지에서 ${\beta}$-cyclodextrin의 첨가는 sangumarme의 생산성을 control의 경우보다 약 4 40배(포함), 약 17배(살포) 정도 증가시켰다. ${\beta}$-cyclodextrin은 현탁배양 배지의 수용액상에서 세포 외로 배출된 alkaloid를 신속히 포획하여 inclusion complex를 형생함으로써 product의 배출을 촉진하여 결과적으로, product pattern을 변화시켜 줌으로 써 생산과 분리가 통시에 이루어질 수 있는 연속공정의 가능성을 확인시켜주었다. 또한 $\beta$cyclodex trin 1.5%(w/v)을 첨가시기를 달리하여 실험한 결과 배양초기에 넣어주는 것이 효과적이었으며, 이때 ${\beta}$-cyclodextrin은 세포성장에 미치는 영향이 없음을 확인하였다. ${\beta}$-cyclodextrin에 의한 benzophenan­t thridine alkaloid의 엄청난 생산 중대 효과는 1) In­c clusion complex 형성에 의한 안정성 증대뿐만 아니라 2) elicitor로서의 역할 등의 복합적 인 요인을 생 각해 볼 수 있는데 2)의 경우에 대한 실험을 세포와 ${\beta}$-cyclodextrin간의 직접적인 접촉을 시키지 않고 해본 결과 미세한 영향을 나타내었으므로 elicitation 의 경우를 완전히 배제한다고 할 수 없었다. 그러나 uv에 의한 inclusion complex의 확인이 1)의 경우를 확인하여 주었으므로 본 실험에서 ${\beta}$-cyclodex­t trin의 역할은 inclusion complex에 의한 생산성 증대라 할 수 있다.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.394-402
• /
• 2013

티타늄화합물과 티타늄부톡사이드를 각각 디아민과 결합시켜 새로운 구조의 중합촉매를 개발하였으며, 이들은 부타디엔의 삼중고리화를 통한 싸이클로도데카트리엔(CDT)의 합성반응에 대해 높은 촉매활성을 나타내었다. CDT합성반응은 고압식 액상반응기를 사용한 배취형 반응계에서 수행하였으며, 반응온도, 촉매의 종류, 촉매량, Al/Ti의 몰비 및 고정화방법 등이 생성물 CDT의 생성수율에 미치는 영향을 관찰하였다. 디아민과 4염화티타늄을 1:1로 결합시킨 촉매는 생성물 CDT에 대하여 90% 이상의 높은 선택성을 보였다. 생성된 CDT 중의 TTT/TTC 입체이성체비는 티타늄에 결합된 디아민의 종류와 Ti/디아민의 비율 등에 따라 달라졌다. 이들 균일계 착체는 담체상에 고정화시켜 사용할 수 있었으며, 티타늄 주촉매는 반응 중 추출되지 않고 활성을 유지하면서 여러 번 사용이 가능하였다. 실리카 담체보다는 탄소담체를 사용하여 티타늄화합물을 고정한 촉매가 보다 높은 활성을 보였으며, 특히 아미노실란 만을 중합시켜 제조한 담체에 티타늄을 결합시키면 BD의 전환율도 높고 CDT에 대한 선택도도 높게 나타났다.

• 한국전자통신학회논문지
• /
• 제9권10호
• /
• pp.1145-1152
• /
• 2014

RFID(Radio-Frequency IDentification)시스템은 무선으로 사물을 식별하는 기술로 물류, 운송, 유통, 재고관리 등과 같은 물품관리를 획기적으로 개선할 수 있는 새로운 방법이다. 그러나 무선을 사용하고 있는 RFID는 통신구간에 대한 보안의 취약성 때문에 정보 누출 및 변조 같은 위험성을 가지고 있다. 우리는 이런 RFID 통신 시스템에 복잡계의 대표적인 계인 Tent-Map을 적용하여 새로운 인증 프로토콜을 설계하였다. 복잡계의 대표적인 특징인 초기치 민감성과 불규칙성을 RFID의 Reader 와 Tag에 적용하여 보다 견고하고 간략한 인증시스템을 설계하였다. 본 논문에서 보인 복잡계를 이용한 RFID 인증 프로토콜 설계는 기존의 Hash 함수나 난수에 의존되었던 인증 시스템에 차별화된 새로운 방법으로 그 활용성을 검증하는데 그 목적이 있다.

• 한국통신학회논문지
• /
• 제35권7C호
• /
• pp.611-617
• /
• 2010

본 논문에서는 직렬 연접 길쌈 부호와 LDPC 부호를 이용하여 수직자기기록 채널에서의 성능을 조사하였다. 실험과정에서 기록 밀도는 1.7, 2.0, 2.4, 2.8 일 때를 각각 실험하였다. 직렬 연접 길쌈 부호는 LDPC 부호보다 복호기의 구현 복잡도가 더 낮다. 직렬 연접 부호는 순환 구조적 길쌈 부호의 부호기와 복호기, 그리고 프리코더와 인터리버로 이루어져 있다. 본 실험에서 직렬 연접 길쌈 부호의 복호 알고리즘은 메시지 전달 알고리즘을 이용하였으며, LDPC 부호의 복호 알고리즘은 Sum Product 알고리즘을 이용하였다. 신호 검출기와 오류정정부호 사이에 반복 복호 기법을 적용한 터보등화기 기법을 적용하였고, 기록 밀도가 높아짐에 따라 직렬 연접 길쌈 부호가 LDPC 부호 보다 더 효율 적인 것을 보였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.403-407
• /
• 2005

Objective of the research is to demonstrate solar thermal space and ground heating system which is integrated to a greenhouse culture facility for reducing heating cost, increasing the value of product by environment control, and developing advanced culture technology by deploying solar thermal system. Field test for the demonstration was carried out in horticulture complex in Jeju Island. Medium scale solar hot water system was installed in a ground heating culture facility. Reliability and economic aspect of the system which was operated complementary with thermal storage and solar hot water generation were analyzed by investigating collector efficiency, operation performance, and control features. Short term day test on element performance and Long term test of the whole system were carried out. Optimum operating condition and its characteristics were closely investigated by changing the control condition based on the temperature difference which is the most important operating parameter. For establishing more reliable and optimal design data regarding system scale and operation condition, continuous operation and monitoring on the system need to be further carried out. However, it is expected that, in high-insolation areas where large-scale ground storage is adaptable, solar system demonstrated in the research could be economically competitive and promisingly disseminate over various application areas.