• 약학회지
• /
• 제13권2_3호
• /
• pp.80-83
• /
• 1969

Acetylsalicylic acid gives a water-insoluble violet complex with $<\alpha>$-Picolin-Cu(II) reagent. The Complex is extractable well with a mixture of $<\alpha>$-Picolin-tetrachloromethane solution. The Complex salt dissolved in the mixed solution shows a maximum absorption at 620 m$<\mu>$. It has a melting point at $171^{\circ}C-$173^{\circ}C and molar ratio of Acetylsalicylic acid: Cu(II): $<\alpha>$-Picolin was estimated as 2:1:2 by continuous variation method and chelate titration method.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.152-156
• /
• 2001

Three dimensional orthogonal grid generation is able to control effectively the grid spacing near the boundaries, but there are some difficulty to meshing complex geometry. The mesh complex geometry by orthogonal grid generation method must divide block of geometry It is required a careful skill, and long time. Its also difficulty to make unstructured mesh on complex geometry. Particularly, three dimensional geometry must have more time and effort. Recently, there have been growing interests in mesh generation of complex grometry, aslike an automobile headlamp, the heart. The method of easily meshing complex geometry is resarched to solve them. We suggest octree grid into one among these methods. As octrce grid is automaticaly adapted at the boundaries by determine the level operations to control the grid spacing near the boundaries are unnecessary. In this paper we showed throe dimensional mesh generation, and heat-flow analysis on the octree mesh.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.266-269
• /
• 1999

An electronically Scannable microphone system is in the Planning stage. For this Purpose, a multiple microphone array with controllable delay is available. To achieve effective point-listening characteristics, we proposed an enclosed microphone array system with a complex weighting method. In this system, both the microphone arrangement and the value of the complex weighting are important. In this report, the construction of microphone array system and the signal-processing method are explained, and the calculation method for optimal complex weighting is also presented. A prototype experimental setup is designed and fabricated to verify the expected characteristics.

• 설비공학논문집
• /
• 제27권8호
• /
• pp.440-447
• /
• 2015

In the shipbuilding process, the confined work spaces of the ship are formed continuously; the ventilation method can therefore be limited to dilution ventilation due to the complex structure and limited opening of the confined space. Also, it is difficult to evaluate air-quality using measurement and an adequate ventilation method. CFD simulation methods are typically used in analyzing ventilation efficiency in these cases. In this study, a method is suggested to analyze the air quality of the complex enclosures in shipbuilding using CFD. Especially, among the conventional indices, the ventilation efficiency scales or indices, the supply air contribution (SVE4), and the age of the air (SVE3) (fit for the confined and complex enclosure) were applied.

• 한국지능시스템학회논문지
• /
• 제16권1호
• /
• pp.18-23
• /
• 2006

복잡계에서의 동기화는 기본적으로 카오스 신호에서의 동기화 이론에 근거를 두고 발전하고 있으나 복잡계 신호의 복잡도가 카오스 신호보다 복잡도가 커서 동기화하는데 어려움이 많다. 이에 본 논문은 복잡계에서 동기화 기법을 적용하기 위하여 n-double 스크롤 회로에서는 결합 동기 이론을 적용한 동기화 기법과 여러 개의 파라미터 중 하나의 파라미터만을 가지고 동기화를 이루는 새로운 임베딩 구동 동기화 기법을 복잡계 회로의 하나인 하이퍼카오스 회로에서 제안하였다. 제안한 동기화 기법을 적용한 결과 복잡계에서 우수한 동기화 결과를 얻었음을 확인하였다.

• Archives of Pharmacal Research
• /
• 제18권1호
• /
• pp.22-26
• /
• 1995

The solubility and dissolution rate of naproxen (NPX) complexed with 2-hydroxypropyl-.betha.-cyc-lodextrin (2-HP.betha.CD) using coprecipitation, evaporation, freeze-drying and kneading method were investigated. Solubility of NPX linearly increased (correlation cefficient, 0.995) as $2-HP\betaCD$ concentraction increased, resutling in $A_l$ type phase solubility curve. Inclusion complexes prepared by four different methods were compared by different methods were compared by dfferential scanning calorimetry(DSC). The NPX showed sharp endothemic peak around $156^{\circ}C$ but inclusion complexes by evaporation, freeze-drying and kneading method showed very broad peak without distinct phase transtion temperature. In contrast, inclusion complex prepared by coprecipitation method resulted in detectable peak around $156^{\circ}C$ which is similar to NPX, suggesting incoplete formation of indusion co plex. Dissolution rate of inclusion complexes prepared by evaporation, frezz-drying and kneding except coprecipitation method was largely enhanced in the simultaed gastric and intestinal fluid when compared to NPX powder and commercial $NA-XEN^\registered$tablet. However, about 65% of NPX in gstric fluid. in case of inclusion complex prepared by coprecipitation method, formation of inclusion complex appeared to be incoplete, resulting in no marked enhancement of dissolution rate. From these findings, inclusion complexes of poorly water-soluble NPX with $2-HP\betaCD$ were useful to increase soubility and dissolution rate, resting in enhancement of bioavailability and minimization of gastrointestinal toxicity of drug upon oral administration of inclusion complex.

• Journal of applied mathematics & informatics
• /
• 제29권1_2호
• /
• pp.49-53
• /
• 2011

In this paper, we adopt a numerical method to establish the smallest set to contain all Ger$\v{s}$gorin discs of a given complex matrix and its some similar matrices. With the smallest set, a new estimation for all eigenvalues of the matrix is obtained.

• Journal of Acupuncture Research
• /
• 제29권4호
• /
• pp.1-6
• /
• 2012

Objectives : This study was done for reporting the effect of scratching method on patients with positional vertigo. Methods : We investigated 22 cases of patients with dizziness, and devided patients into two groups : We treated one group by complex oriental medical treatment with scratching method therapy, and did the other group by complex oriental medical treatment without scratching method therapy. Korean version of dizziness handicap inventory at baseline and final were used for evaluating the effect of the treatment. Results : 1. In scratching method group and non-scratching method group, compared with baseline, at final, Korean version of dizziness handicap inventory was significantly decreased. 2. At final, scratching method group showed significant decrease on Korean version of dizziness handicap inventory compared with non-scratching method group. Conclusions : Scratching method showed significant improvement in dizziness.

• Journal of Acupuncture Research
• /
• 제28권5호
• /
• pp.1-7
• /
• 2011

Objectives : This study was done for reporting the effect of scratching method on patients with peripheral facial palsy. Methods : We investigated 34 cases of patients with peripheral facial paralysis, and devided patients into two groups : We treated one group by complex oriental medical treatment with scratching method therapy, and did the other group by complex oriental medical treatment without scratching method therapy. gross grading system of House-Brackmann(HB score) and Yanagihara's unweighed grading system(Y score) at baseline and final were used for evaluating the effect of the treatment. Results : 1. In scratching method group and non-scratching method group, compared with baseline, at final, HB score was significantly decreased and Y score was significantly increased. 2. At final, scratching method group showed significant decrease on HB score and significant increase on Y score compared with non-scratching method group. Conclusions : scratching method showed significant improvement in peripheral facial palsy.

• Advances in Computational Design
• /
• 제4권1호
• /
• pp.15-32
• /
• 2019

One of the efficient and useful tools to achieve the optimal design of structures is employing the sensitivity analysis in the finite element model. In the numerical optimization process, often the semi-analytical method is used for estimation of derivatives of the objective function with respect to design variables. Numerical methods for calculation of sensitivities are susceptible to the step size in design parameters perturbation and this is one of the great disadvantages of these methods. This article uses complex variables method to calculate the sensitivity analysis and combine it with discrete sensitivity analysis. Finally, it provides a new method to obtain the sensitivity analysis for linear structures. The use of complex variables method for sensitivity analysis has several advantages compared to other numerical methods. Implementing the finite element to calculate first derivatives of sensitivity using this method has no complexity and only requires the change in finite element meshing in the imaginary axis. This means that the real value of coordinates does not change. Second, this method has the lower dependency on the step size. In this research, the process of sensitivity analysis calculation using a finite element model based on complex variables is explained for linear problems, and some examples that have known analytical solution are solved. Results obtained by using the presented method in comparison with exact solution and also finite difference method indicate the excellent efficiency of the proposed method, and it can predict the sustainable and accurate results with the several different step sizes, despite low dependence on step size.