• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.713-718
• /
• 2006

We designed and fabricated, in this paper, a quintuple band folded monopole antenna for the mobile phone handset that can be provided multiple mobile services. Antenna design was based on the compensation of series antenna capacitance with the expansion of physical antenna length by the proper folding structure. It's shown that this antenna satisfies quintuple service band as CDMA/GSM/DCS/USPCS/WCDMA, and is more cost competitive than conventional metal plate pressing method by applying on flexible PCB technology. Measured maximum gain on quintuple band were $-2.51{\sim}+1.82 dBi$, and radiation patterns were also shown nearly omnidirectional on all bands.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.208-211
• /
• 2005

This paper describes the development process of steering system for reduce idle vibration through the data level of frequency and sensitivity. High stiffness and light weight vehicle is a major target in the refinement of passenger cars to meet customers' contradictable requirements between NVH performance and fuel economy. The target frequency of the steering system is set by benchmarking of a competitive vehicle and the vibration mode map is used to separate steering column modes from resonance of body structure and engine idle rpm. This paper descirbes the analysis approach process for high stiffness of steering system and the design guideline is suggested about steering column and support system by using mother car at initial design stage. We used a patent map in order to analyze accurately a technical trend and suggested the design process using dynamic damper of steering system considering sensitivity. And we established techniques of analysis on steering system and evaluated the level of accuracy of analysis through correlating the test and analysis results. It makes possible to design the good NVH performance vehicle at initial design stage and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.93-100
• /
• 1993

With increasing technology, requirement to car noise and related dynamics are getting competitive keypoint. Unfortunately, vibro - acoustic behavior of a car is nowadays only possible after development of prototypes. But, obviously, in the Area of Research, many of Industrials, Universities and research centers try to codevelop the design tools to predict the vibro-acoustic behaviors. At this stage, it is more realistic to represent the existing technologies in order for the engineer to get their own know-how to design and to Integrate existing techniques, to setup their test facility, and to develope some tools with which they can successfully predict noise levels of car in the design phase. Moreover, most of the theories which will be represented in this paper can be used in the design phase. At any way, finding the cause of trouble shooting is more urgent than the design of a car to the test engineer. In this paper, transfer path analysis, noise source identification, and the key test method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of finding characteristics of joint and welding part will be introduced. Most parts of this paper was quoted from the papers of LMS.

• Structural Engineering and Mechanics
• /
• v.17 no.2
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.70-81
• /
• 2020

Plastics that we use and simply throw away have a life span of about 500 years and barely decompose. The practice of producing and using common plastics needs to be challenged. Until now, they have been useful in the industrial structure of mass production, but it can be said that there is a lack of research into new materials to introduce and apply in terms of material recycling. As a result of this, we have come to the uncomfortable realization of the fact that we cannot incinerate or reuse these precious resources indiscriminately. No matter how well-designed a product is, it has a competitive advantage if production and consumption activities, waste, collection, sorting and treatment are considered in terms of a continuous cycle, and in this respect, Extended Producer Responsibility (EPR) can help. We are implementing the EPR system, and active industrialization in the field of recycling is required, which is also a challenge for producers to participate actively in recycling and seek to save and recycle resources in design and manufacturing. Against this backdrop, We would like to examine the possibilities, through various studies and developments on product design of recyclable materials, which is being conducted mainly in Europe. In particular, we would like to examine the methods, and value of solving environmental problems and the active efforts to achieve this in the design world, and in particular the case of product design using recycled plastics.

• Journal of Ship and Ocean Technology
• /
• v.10 no.3
• /
• pp.17-26
• /
• 2006

Spar platforms have been installed as a competitive alternative offshore production structure for deepwater oil field. Since the first spar platform was constructed, its configuration has evolved to the so-called the truss spar and then the cell spar. This paper describes the dynamic analysis and fatigue life assessment of steel catenary riser (SCR) connected to cell spar platform. Two different cell spar platforms are considered herein; the original cell spar and the modified one. The original cell spar was modified by introducing an additional damping plate at its bottom in order to reduce wave-frequency motions. Firstly the wave-frequency motions of cell spar platforms are calculated based on the potential theory. Then, the dynamic responses of SCR induced by platform motions are computed. Finally the fatigue life of SCR is estimated by spectral method and the performance of two spar platforms are compared in terms of the fatigue life. Through the present study, it is found that the fatigue life of the modified cell spar increases only slightly.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.563-568
• /
• 2010

TV businesses that have brought a competitive structure in terms of price, definition, product design for a long time now are bringing User eXperience (UX) into relief as DTVs come to support broadcast information-related services such as various broadcast channels and Electronic Program Guide(EPG), etc., and playing of multimedia contents like music/videos, etc. This study worked on an evaluation by developing a UI to control easily the various and complex broadcast contents or multimedia contents provided by DTVs. The UI Design for new DTVs was developed based on Function, Flow and Form in the concept of Single ABC (Access, Browser and Control), and the usability test of the developed UI concept along with the UIs of the major DTV products, was done for Channel Managers and the multimedia browsers for 32 users of DTVs in the U.K./U.S., respectively. As a result of the usability test, the new concept of Channel Manager was evaluated high both in the U.K./U.S, while the multimedia browser was evaluated low in the U.S., relatively.

• Archives of Pharmacal Research
• /
• v.15 no.4
• /
• pp.347-355
• /
• 1992

To elucidate structure of group "a" epitope, mouse antibodies that express idiotype monoclonal antibody and anti-idiotype monoclonal antibody against the group specific "a" determinant were purified by hydroxyapatite column. To obtain hepatitis B surface antigens (HBsAg). HBsAg positive blood was sequencially purified by ammonium sulfate precipitation, hydroxyapatite, sepharose 4B column chromatography and ultracentrifugation. The major protein (p25) and glycoprotein (gp30) of HBsAg were isolated by concanavalin-A-sepharose 4B. The ability of p25-gp30 among the HBsAg to inhibit the idiotype-anti-idiotype reaction was dependent on conformation, since reduced and alkylated p25-gp30 virtualy lost their inhibitory capacity when compared to native HBsAg. The data suggest that hepatitis B antigen is a conformational antigen critically dependent upon the disulfide bonds of p25-gp30.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.118-123
• /
• 2005

The intranet systems used in government sponsored research institutes have been faced with the change of knowledge management under a large scale project. The intranet structure have to be changed to knowledge management system so that every year, the increasing research results information may be effectively administrated by government control system and the competitive power of R&D may be gotten in the society of technical competition. In this paper, we've researched about the change of the times, legacy systems in each organization, the expected efficiency, which have been demanded in government sponsored research institutes through a real implementation process.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.312-331
• /
• 1991

본 연구의 목적은 정보기술 구조와 기업의 경쟁전략사이의 관련성을 조사함으로써, 기업의 경쟁전략의 형태에 따라서 정보시스템이 어떠한 형태를 취하느냐를 조사하는데 있었다. 다시말해서 공격형의 전략을 채택한 기업은 정보시스템의 구조가 분산화된 형태, 방어형의 전략을 채택한 기업은 집중화된 형태, 분석형의 전략을 채택한 기업은 중간형태를 취할 것이라는 가설을 설정하였다. 본 연구에서 나타난바에 의하면 정보시스템 구조는 경쟁전략과 상당한 관계가 있고 특히 정보기술활동의 집중화 정도는 경쟁전략과 깊은 관련성이 있다. 서로 다른 경쟁전략을 택하는 기업은 서로 다른 정보시스템을 채택하는 경향이 있음을 알 수 있다. 보수적인 경쟁전략을 가진 조직의 정보시스템구조는 적극적인 경쟁전략을 가진 조직의 정보시스템구조 보다는 더욱 집중화되어 있다. 다시말해서, 보수적인 조직의 사용자 부문은 적극적인 조직의 사용자 부문보다는 그들의 정보기술활동에 대한 책임성이 덜하다. 이러한 사항을 기초로하여 본 논문에서는 보수적인 경쟁전략은 정보시스템에 대한 책임성의 집중화에 영향을 미친다고 예측할 수 있고 반면에 적극적인 경쟁전략은 정보시스템에 대한 책임성의 분권화에 영향을 미친다고 예측할 수 있다. 일반적으로 본 연구의 결과는 조직변화개념에 대한 부가적인 도움을 주지만 그러나 경쟁전략뿐만 아니라 조직의 다른 상황변수도 정보시스템구조에 영향을 미친다는 것을 지적해 두고자 한다.