• Management & Information Systems Review
• /
• 제16권
• /
• pp.1-35
• /
• 2005

The Virtual organization is a alternative organization for redesigning the classical organization. With the advantages of the quickness of decision making and also connection with other organization, it can be well prepared for the consumer's need. With recent increased interest in virtual organization, there are many companies that consider the virtual organization as practical use. However, it is still in an early stage of the research and the concept has not been established for the virtual organization. The purpose of this research is to systematize the understanding of the virtual organization for the future organizational model. The differences of existing organizational structure can be compared with these three reasons of practical use for the virtual organization, the development of information technology, the importance of strategic choice and unreliable environment. Also, the framework for the virtual organization can be presented with its profiles. The use of this research can be appeared by analyzing the given framework from the companies that are already made practical application of the virtual organization. For the future, this research will give the direction and its viewpoint how this will be used for achieving the competitive advantage of companies and practical use for actual aspects with the pursuit of this research.

• Journal of Sensor Science and Technology
• /
• 제29권5호
• /
• pp.303-311
• /
• 2020

Nondispersive infrared CO₂ gas sensor was developed after the simulation of optical cavity structure and assembling the optical components: IR source, concave reflectors, Fresnel lens, a hollow disk, and IR detectors. By placing a hollow disk in front of reference IR detector, the output voltages are almost constant value, near to 70.2 mV. The absorbance of IR light, F_a, shows the second order of polynomial according to ambient temperatures at 1,500 ppm. The differential output voltages and the absorbance of IR light give a higher accuracy in estimations of CO₂ concentrations with less than ± 1.5 % errors. After implementing the parameters that are dependent upon the ambient temperatures in microcontroller unit (MCU), the measured CO₂ concentrations show high accuracies (less than ± 1.0 %) from 281 K to 308 K and the time constant of developed sensor is about 58 sec at 301 K. Even though the estimation errors are relatively high at low concentration, the developed sensor is competitive to the commercial product with a high accuracy and the stability.

• Journal of the Korea Furniture Society
• /
• 제27권4호
• /
• pp.399-411
• /
• 2016

Korea Furniture design development process is repeated a number of changes by the change of residence and type of market demand derived from the process of industrialization. The modernization process of industrialization advances by large-scale population moves to the city to urbanization proceeds rapidly. Housing problems are concentrated in cities and sparked the furniture industry, furniture design by changes in marketing concepts that appear in the industrialization phase, growth must necessarily accommodate the needs of consumers. Including kitchen furniture, living room furniture and master bedroom furniture has been sensitively adapted changes in the structure of these houses, particularly structural changes Apartments. Starting in the 1990s, jumping over furniture industry has adapted quickly to the market demand, changes in marketing concepts. Furniture industry is growing market share in most of the country, but the entire industry had to undergo a competitive marketing overheating due to excessive supply in excess of market demand since the mid-1990s. Changes in furniture design in this process was the change in furniture design more than the change of the residential structure. The study industrial development and marketing concepts are changing to construct a model to track the changes varied styles and time changes affect whether the main furniture design.

• The Journal of Industrial Distribution & Business
• /
• 제10권3호
• /
• pp.7-16
• /
• 2019

Purpose - The purpose of this paper is to investigate the determinants of corporate anti-corruption practice disclosure (ACPD) from the perspective of rent-seeking theory. Research design, data, and methodology - Data are hand-collected from corporate social responsibility reports (CSRR) issued by 724 A-share listed firms in China. This paper provides an empirical analysis of the relationship between ownership structure and corporate ACPD as well as its moderating role in the institutional environment. Results - Our findings indicate that rent-seeking is a key factor in influencing corporate ACPD. State-owned enterprises disclose significantly more anti-corruption information than private ones in order to achieve personal promotion of top executives. Monopoly enterprises reported significantly less anti-corruption information than enterprises in competitive industries due to their rent-seeking behavior. The reduction of government intervention and improvement of legal environment are helpful to curb corporate rent-seeking activities and enhance the level of corporate ACPD. Conclusions - Rent-seeking is an important factor in explaining corporate voluntary disclosure in emerging countries. Institutional environment also plays a moderating role in the relationship between ownership structure and corporate voluntary disclosure. Our results are of interest to policy makers, regulators and market participants that are interested in corporate voluntary disclosure and corruption prevention.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.323-326
• /
• 2008

Data Envelopment Analysis (DEA) is a theoretically sound framework for performance analysis that offers many advantages over traditional methods such as performance ratios and regression analysis. Largely the result of multidisciplinary research during the last three decades in economics, engineering and management, DEA is best described as an effective new way of visualizing and analyzing performance data. Besides, overseas information technology companies have aggressively tried to enter the domestic market. In the age of globalization and high competition, it is imperative that the system integration (SI) companies need to introduce the performance evaluation models of SI projects, including Capability Maturity Model and Software Process Improvement and Capability Determination, to gain a competitive advantage. Therefore, it makes our research regarding evaluation of SI projects very opportune. The purpose of the study is not only to evaluate efficiency of each project by DEA but also to gain insight into various factors such as project complexity, team members' man-months structure, and process index(project management index) that link to the projects performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제21권12호
• /
• pp.3215-3226
• /
• 1996

In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권4호
• /
• pp.263-274
• /
• 2000

Carotenoids are widely distributed natural pigments which are in an increasing demand by the market, due to their applicatins in the human food, animal feed, cosmetics, and pharmaceutical industries. Although more than 600 carotenoids have been identified in nature, only a few are industrially important (${\beta}$-carotene, astaxanthin, lutein or lycopene). To date chemical processes manufacture most of the carotenoid production, but the interest for carotenoids of biological origin is growing since theire is an increased public concern over the safety of artificial food colorants. Although much interest and effort has been devoted to the use of biological sources for industrially important carotenoids, only the production of biological ${\beta}$-carotene and astaxanthin has been reported. Among fungi, several Mucorales strains, particularly Blakeslea trispora, have been used to develop fermentation processes for the production of ${\beta}$-carotene on almost competitive cost-price levels. Similarly, the basidiomycetous yeast Xanthophyllomyces dendrorhous (the perfect state of Phaffia rhodozyma), has been proposed as a promising source of astaxanthin. This paper focuses on recent findings on the fungal pathways for carotenoid production, especially the structure and function of the genes involved in the biosynthesis of carotenoids in the Mucorales. An outlook of the possibilities of an increased industrial production of carotenoids, based on metabolic engineering of fungi for carotenoid content and composition, is also discussed.

• Journal of Information Technology Services
• /
• 제9권1호
• /
• pp.91-111
• /
• 2010

An efficient industry structure is essential for competitive IT Service industry in a global world. The purpose of this research is to derive a policy direction paradigm for strengthening IT service industry structure. To find an effective policy direction, an in-depth analysis on deep-rooted problems of IT service industry has been conducted. The root-causes of industry problems are found with new perspectives on IT service industry. Past and present policies on IT service industry have been reviewed based on desirable industry behavior. A new policy paradigm and a roadmap for efficient industry policy are suggested. To justify adequacy of new policy direction, global benchmarking has been performed. USA, Germany, and Japan's IT service industry has been reviewed based on global competitiveness and desirable eco-system. And an in-depth analysis has been performed for two big competitors, India and China, The adequacy of the new policy paradigm has been tested, and mostly approved. IT service industry policy needs to be transformed from manufacturing concepts to service concepts, from domestic focus to global focus, from zero-sum policy to positive-sum policy, from supplier focus to market focus, from internal industry itself to co-growth with main industries. etc. The results of this study can be used for policy adjusting and policy making to strengthen IT service industry's global competitiveness and to improve long-term performance of Korean economy. Further in-depth researches with quantitative analysis will be needed to fully justify the adequacy of the derived new policy directions.

• Journal of Korea Foundry Society
• /
• 제27권4호
• /
• pp.167-172
• /
• 2007

In the present study, the microstructural evolution and mechanical properties of $Al_{71.6}Ge_{28.4}$ eutectic alloy have been investigated. Stable (fcc ${\alpha}$-Al and diamond cubic ${\beta}$-Ge) and various metastable crystalline (monoclinic, rhombohedral) phases were produced by competitive phase selection during non-equilibrium processing methods i.e. melt spinning and injection casting. The as-injection casted samples containing metastable-equilibrium eutectic (${\alpha}$-Al + monoclinic) structure showed much higher strength than samples with equilibrium eutectic (${\alpha}-Al+{\beta}-Ge$) structure but plasticity disappointingly diminished. In order to endow the enhanced ductility without significant strength drop, the alloys was heat-treated at transition temperature from metastable phase to stable phase. The annealed specimen displayed the phase transformed microstructural evolution and enhanced macroscopic plasticity.

• Journal of Distribution Science
• /
• 제13권10호
• /
• pp.23-34
• /
• 2015

Purpose - Currently, the foreign trade environment in China has shifted to a very different system. Korean enterprises have been forced to compete with Chinese enterprises in today's world market owing to the economic growth and technical improvement in China. Research design, data, and methodology - The author visited Korean export enterprises in Shanghai from January 5 to 12, 2014 to implement a questionnaire survey and conduct in-depth interviews with the local enterprises. The author investigated the Shenyang area using e-mail communication. For the questionnaire, one copy of the questionnaire was given to each business and to a staff member for each of the products when a company sold multiple products. Results - Selling cost advantage, efficiency of economic scale, and product differentiation had the most influence on Korean enterprises' export strategy to China. Additionally, entry barrier, product differentiation, and concentration all had an influence on Korean enterprise export strategy to China as well. Conclusion - Korean enterprises developed strategies for price priority, economies of scale, and product differentiation based on changes in the competitive structure in the Chinese market.