• 제목/요약/키워드: Competency evaluation

검색결과 553건 처리시간 0.029초

국가직무능력표준(NCS)에 근거한 조경분야 교육과정 개발 방법론 - 갭분석을 중심으로 - (A Methodology to Develop a Curriculum based on National Competency Standards - Focused on Methodology for Gap Analysis -)

  • 변재상;안성로;신상현
    • 한국조경학회지
    • /
    • 제43권1호
    • /
    • pp.40-53
    • /
    • 2015
  • 산업현장의 변화와 요구에 부응할 수 있는 인력을 체계적으로 양성하기 위하여 2001년에 국무조정실을 중심으로 NCS(National Competency Standards, 이하 NCS)와 국가자격체제(National Qualification Frameworks, 이하 NQF)의 도입이 결정되었다. 건설분야 내 조경 역시 2008년 "국가직무능력표준(NCS) -조경"이 시범 개발되어 2009년부터 3년간 시범운영되었다. 특히 2013년 출범한 박근혜 정부의 주요 국정과제 중 하나로 '학벌이 아닌 능력 중심의 사회 구현'이 채택되면서, 이를 실천하기 위한 구체적인 수단으로 NCS 체제 구축이 전국적으로 확산되고 있는 시점이다. 그러나 국가에서 개발한 NCS의 경우, 이상적인 직무수행능력을 명시하였기 때문에 각 대학의 학생수준의 차이, 기자재와 교수들의 확보문제, 현행교육과정의 시수 문제 등 실질적인 운영상의 문제점을 반영하지 못한 단점이 있으므로, 이를 현실적인 교육과정에 연착륙시키기 위해서는 현재의 교육과정과 NCS와의 차이 즉 갭(gap)을 명확히 분석하는 과정이 선행되어야 한다. 갭분석은 기존의 교육과정을 NCS 기반 교육과정으로 개편하기 위한 초기 단계의 방법론으로 NCS 능력단위별 능력단위요소와 수행준거를 기준으로 학과 내 기존 교육과정과의 괴리도 혹은 일치 정도를 1에서 5까지 리커트 척도를 활용하여 기입한 후 분석하는 방법이다. 이처럼 현재의 대학 내 교육과정과 NCS와의 일치 및 괴리 정도를 측정함으로써 향후 NCS 운영을 희망하는 대학에서는 NCS의 적용 가능성과 개발 운영 이후의 효과성을 검증할 수 있는 기초 도구를 확보할 수 있다. 갭분석을 통한 교육과정 개편의 장점으로는 첫째, 정부의 재정지원 사업과 연계하여 정성적인 학과별 NCS 도입률에 대한 정량적 지표를 제공할 수 있으며, 둘째, NCS 기반 교육과정 개편 시 부족한 혹은 포화상태인 부분에 대한 객관적인 기준을 제공해 준다. 즉, 해당 NCS 세분류 도입 시 부족한 능력단위 및 능력단위요소를 추출할 수 있으며, 기존 과목별 능력단위요소별로 보완 사항도 추출할 수 있는 동시에, 이를 통한 상세 강의계획서 및 기초 교과목 개설을 위한 방향성을 제시해 주는 장점이 있다. 다만, 현재까지 개발된 갭분석의 이론을 보완하여 보다 체계적으로 정비해야 하는 과제는 남아 있다. 교육부, 고용노동부는 산업현장의 요구를 교육훈련 및 자격에 체계적으로 반영하기 위해 관련 산업계 인사들이 모여 실무적인 차원에서 NCS 표준을 적극적으로 개발하고 보급하여야 하며, NCS 적용을 희망하는 대학에서는 일과 자격이 연계될 수 있는 교육과정을 NCS 기반으로 개편하여야 할 것이다. 이를 위해 대학에서는 관련 산업 전망 및 대학 내 교수자원과 지역 산업과의 관련성을 고려하여 적용하고자 하는 NCS 세분류를 명확히 선정하여야 할 것이다. 이후 NCS 기반 교육과정 개편을 위해 갭분석을 사용하여 개편의 방향과 기준을 보다 객관적이고 합리적으로 수립하여 교육과정명세서에 대한 명확한 논리적 근거를 확보하고 있어야 과정이수형 자격제도에 효율적으로 동참할 수 있을 것이다.

한방간호 관리체계 연구 (Summary and Conclusion Title :Oriental Nursing Management System)

  • 문희자
    • 동서간호학연구지
    • /
    • 제10권1호
    • /
    • pp.11-26
    • /
    • 2004
  • The purpose of this study is to investigate the present conditions of nursing investment contents, its conversion process, and output in Oriental University Medical Center, Korea to get good qualified Oriental nursing result which is the ultimate purpose of the Oriental nursing management, and to develope a matrix of Oriental nursing management system on the basis of that project. The subjects for nursing investment and output contents were eighteen nursing directors in eleven Oriental University Medical Center and two hundred thirty-nine nurses with three years and over experience in Oriental medical center. The subjects for Oriental nursing organization, human affair management, and control function were nineteen Oriental medical center in Oriental University Medical Center, Korea. Data were collected from November, 2002 to February, 2003 with questionnaire. Data analysis was done by SPSS PC+ 12 program. Frequency, percentage, and minimum/maximum values were used for investment contents, and frequency and percentage were used for conversion process and output contents. 1. The input factors of oriental nursing management system The objective's western hospital career was over five years of one hundred and seventy-five(73.2%) persons. Nursing in-service education was performed in fourteen hospitals(77.8%). Two hundreds(83.7%) were pro to oriental nurse system. Only four hospitals(22.2%) had independent budget in nursing division. Nursing staff allocation to the bed was from 2.8:1 to 9.06:1 respectively, with a big gap of the rate following the hospitals. 2. The conversion factors of oriental nursing system 1) Oriental nursing system Oriental hospital nursing system was organized independently in ten hospitals among eighteen hospitals. The recruitment of nurses which was a vital role of the nursing division of the hospital was mostly(79%) opened. The education to develope nursing personnels was through in-service one in 97.4%. Education for oriental nursing and management was performed in 42.1%(eight hospitals) and that for reserves was done in 36.8%(seven hospitals). Administration for nursing education by nursing division was 68.5%(thirteen hospitals). The post education evaluation was performed by report submission in 36.8%(seven hospitals), by written examination in 26.3%, by questionnaires in 21.1%, and by lecture presentation in 15.8% subsequently. The directorial meeting for the nursing directors was attended by 84.2%(sixteen hospitals), and the meeting type was the medical executive and support division executive meeting in 55.6%(ten hospitals) and the personnel management in 39.6%(seven hospitals). 2) The actual conditions of oriental nursing personnel management The reason of working in oriental hospital was by voluntary in 67.1%(a hundred and sixty persons), by nursing department order in 28.0%(sixty-seven persons), and by others in 5.0%(twelve persons) respectively. The shift form was a three-shifts one in 94.7%(eighteen hospitals), a two-shift one in only one hospital. Duty assignment was functional in 52.6%(ten hospitals), team and functional in 26.3%(five hospitals) and no team alone. Promotion manual was present at 68.4%(thirteen hospitals) and the competency essentials comprised of performance evaluation in 79%, interview, written examination, training result, study result subsequently. No labor union existed in 79%(fifteen hospitals) 3) Oriental nursing preceptor system There were five oriental hospitals(27.7%) administering the preceptor utilization model, which showed lower rate than the twenty-two medical university hospitals in Seoul in which fifteen hospitals (72.7%) were having the system. To the question of necessity of oriental nurse system asked to the objectives of two hundred and thirty-nine with more than three year-experience in oriental hospital, two hundred persons(83.7%) answered positively. 4) The control of oriental nursing The evaluation results from the target hospitals were mostly not opened in 89.4% of oriental hospitals. Thirteen hospitals(68.3%) had evaluation system of direct managers and the next were three hospitals(15.8%) of direct managers and selves. There was one hospital(5.3% each) where fellows and superiors, fellows, and inferiors' evaluation was performed and no hospital where superiors, fellows, inferiors and selves, and superiors, fellows and selves' evaluation was performed. The QI activity of nursing was 42.1%(eight hospitals) for nursing service evaluation, 36.8% for survey of ECSI, 26.3% for survey of ICSI, 15.8% for medical visit rate, 10% for hospital standardization inspection in sequence. 3. The output factors of oriental nursing management system The job satisfaction appeared good in general, indicating very good in thirty-seven persons (15.7%), good in one hundred and fourteen persons (48.3%) and fair in eighty-five persons(36.0%).

  • PDF

Effects of the 4C Core Competencies on Work Ability among Dental Hygienists

  • Kim, Do-Young;Jang, Kyeung-Ae
    • 치위생과학회지
    • /
    • 제19권4호
    • /
    • pp.220-227
    • /
    • 2019
  • Background: This descriptive study aimed to examine the relationship between the 4C core competencies and work ability among dental hygienists. Methods: From November 2018 to January 2019, data were collected-from 190 dental hygienists workong in dental clinics in Busan, Ulsan, and Gyeongsangnam province using structured questionnaires. For the general characteristics of the dental hygienists, frequency and percentage were calculated, and the level of the 4C core competencies and work ability of dental hygienists was calculated using means and standard deviations. A multiple regression analysis was conducted to analyze the effects of the 4C core competencies on work ability. Results: The mean scores for the 4C core competency levels of the dental hygienists were as follows: communication ability 3.34, critical thinking ability 3.41, creative problem-solving 3.40, and collaborative self-efficacy 3.27. Meanwhile the mean score for work ability level was 3.65. The predictive factors influencing work ability were communication ability and cooperative self-efficacy (p<0.001), and the sub-factors of critical thinking ability that affect work ability were sound conferences (p<0.01), intellectual fairness (p<0.05), intellectual enthusiasm (p<0.05), and self-confidence (p<0.001). Finally, the sub-factors of creative problem-solving ability that affect work ability were planning and execution (p<0.01) and performance evaluation (p<0.05). Conclusion: The current study showed that education programs covering the core competencies of dental hygienists, rather than the existing theoretical education program, should be developed and implemented to enhance 4C core competencies that affect work ability.

임상간호사의 직무만족 측정도구 개발 (Development of Job Satisfaction Scale for Clinical Nurses)

  • 이병숙;어용숙;이미애
    • 대한간호학회지
    • /
    • 제48권1호
    • /
    • pp.12-25
    • /
    • 2018
  • Purpose: This study was performed to develop the Job Satisfaction Scale for Clinical Nurses (JSS-CN) and verify its validity and reliability. Methods: A preliminary 42-item version of the JSS-CN was developed through literature reviews and in-depth interviews. The draft scale was developed using thirty-seven items selected following content validity evaluation. Finally, thirty-three items with response options on a 5-point Likert scale were selected based on internal consistency reliability and construct validity. Subsequently, the test-retest reliability and convergent validity of the JSS-CN were verified. Results: Six factors, namely, recognition from the organization and professional achievement, personal maturation through the nursing profession, interpersonal interaction with respect and recognition, accomplishment of accountability as a nurse, display of professional competency, and stability and job worth, were identified, which explained 59.7% of the total variance. The JSS-CN's Cronbach's ${\alpha}$ for the total scale was .95, and the intra-class correlation coefficient was .90. The correlation coefficient between the scores of the JSS-CN and Slavitt's scale was .75, and that between the JSS-CN and job performance was .53. Conclusion: Results showed that the JSS-CN has good reliability and validity. Therefore, it is concluded that the JSS-CN could be a useful tool for the measurement of the job satisfaction of clinical nurses in Korea.

직업 역량 강화를 위한 고등학생 대상 샵 매니저 교육 프로그램 개발 (Development of a Shop Manager Training Program for Vocational Education High School Students)

  • 이지수;이윤정;노혜균
    • 한국의류학회지
    • /
    • 제42권4호
    • /
    • pp.599-611
    • /
    • 2018
  • This study develops a training program for vocational high school students. This study implemented the ADDIE teaching-learning model and was conducted in the sequence of analyses, design, development, implementation and evaluation. In the analysis phase, the existing studies related to vocational competency training were analyzed along with an analysis of the current education programs and suitability assessment. Based on the analysis, the education program was designed and contents were determined. The program consisted of 5 chapters and 17 unit hours of instruction. Reigeluth's (1987) theory was used as the framework for organizing educational materials in the development phase. The programs were implemented on students and evaluated by students as well as experts. Students evaluated the program in terms of the degree of motivation for learning, comprehension of learning content, perceptions of lessons in classes as well as the advantages and disadvantages of the program. Experts evaluated the program in terms of program validity. The results indicate the developed program was useful for training students vocational competencies as shop managers. This study contributes to the field of fashion education, by presenting an example of systematic development of an educational program in connection with industry.

스크래치를 이용한 문제해결 프로그래밍에서 CT-TDPS 학습 모형의 효과성 연구 (A Study on the Effectiveness of CT-TDPS Learning Model in Problem Solving Programming using Scratch)

  • 김영직;김성식
    • 컴퓨터교육학회논문지
    • /
    • 제23권3호
    • /
    • pp.41-47
    • /
    • 2020
  • 21세기 미래 인재에게 필요한 핵심 역량으로 컴퓨팅 사고력이 주목받고 있다. 국내외적으로 컴퓨팅 사고력 향상을 위한 소프트웨어 교육이 한창이다. 그중에서 문제해결 프로그래밍 교육은 컴퓨팅 사고력 향상에 도움이 된다. CT-TDPS 학습 모형은 복잡한 문제들을 모듈화하는 분해, 추상화 사고 과정과 이를 구현하는 반복적·점증적 프로그래밍 방식인 애자일(Agile) 개발 방식을 따른다. 본 연구에서는 스크래치를 이용한 문제해결 프로그래밍 교육에 CT-TDPS 학습 모형을 적용하여 컴퓨팅 사고력 향상을 확인하고자 하였다. 연구 결과, CT-TDPS 학습 모형을 적용한 문제해결 프로그래밍 교육에서 컴퓨팅 사고력의 하위 요인인 컴퓨팅 개념, 컴퓨팅 수행, 컴퓨팅 관점에서 모두 향상이 되었음을 확인할 수 있었다. 그리고, Dr.Scratch 자동 평가 결과에 대한 t 검정 결과 실험집단에서 유의한 차이가 있음을 확인하였다.

한국과 일본의 초등학교 수학과 교육과정 비교 연구: 2015 개정 교육과정을 중심으로 (A Comparative Analysis of Elementary School Curriculum for Mathematics in Korea and Japan: Focus on 2015 Revised Curriculum)

  • 강효민;류성림
    • 한국초등수학교육학회지
    • /
    • 제23권2호
    • /
    • pp.219-245
    • /
    • 2019
  • 본 연구에서는 한국의 2015 개정 초등학교 수학과 교육과정과 일본의 소학교 산수 학습지도요령의 개정 방향이 무엇이며 학습내용요소에는 어떤 차이가 있는지 알아보고 차기 교육과정의 기초자료를 제공하는 데 그 목적이 있다. 개정 방향을 비교하여 교육과정의 목표, 교수·학습방법, 평가방법의 측면에서 한국과 일본의 초등학교 수학과 교육과정에 대해 분석하였다. 학습내용요소를 각 영역별로 비교하여 한국과 일본의 교육과정에서 나타나는 내용요소의 차이점과 특징을 분석하였다.

  • PDF

학습성과 향상을 위한 보봇 이용 공학설계입문 운영사례 (A Case Study of Introduction to Engineering Design Course using Boe-Bot for Improving Course Outcomes)

  • 김희선
    • 공학교육연구
    • /
    • 제14권1호
    • /
    • pp.74-81
    • /
    • 2011
  • 본 논문에서는 공학설계입문 교과목에서 공학설계에 대한 흥미를 높이면서 교과목 학습 성과를 높일 수 있는 방안에 대하여 연구하였다. 기존의 교재 내용 중심 강의에서 벗어나 본 교과목의 학습성과인 PO3에 해당하는 설계능력과 PO6의 팀웍, PO7의 의사소통 능력을 높일 수 있도록 학습성과 중심으로 주별 강의 내용을 재설계하였다. 그리고 학습성과별 평가도구를 개발하였고, 평가도구별 측정기준(Rubrics)를 정의하였다. 또한 교과목 학습성과의 달성목표를 정하고 결과를 분석하였다. 교과목 학습성과의 향상과 더불어 설계입문 교과목에 대한 흥미와 만족감을 유발하기 위해서 보봇(Boe-Bot)로봇을 이용한 설계 프로젝트를 진행하였다. 학습성과 평가및 강의 평가를 통하여 이전 강의에 비해 학습성과 향상과 더불어 설계에 흥미가 높아졌음을 확인하였다.

정보활용능력 교육의 효용성에 관한 실험적 연구 (An Experimental Study on the Effectiveness of Education for Information Literacy)

  • 이정연;최은주
    • 한국문헌정보학회지
    • /
    • 제40권1호
    • /
    • pp.315-334
    • /
    • 2006
  • 본 연구는 정보활용능력 교육의 효용성을 알아보고자 선정된 실험집단과 통제집단을 통하여 각 집단의 수업전후의 정보활용능력을 측정하였다. 교육 후에 실험집단과 통제집단의 정보활용능력의 차이는 유의한 것으로 나타났다. 정보활용능력 교육의 효과는 각 영역에서 높은 것으로 나타났는데 특히 정보윤리 영역과 정보분석 영역에서 그 효과가 높음을 보였다. 그러나 정보활용능력 교육은 기초환경요인에 영향을 받지 않는 것으로 밝혀졌다. 또한 교육을 수강한 학생들은 정보활용능력에 대한 자신감과 도서관에 대한 인식도가 변화되었다. 이로서 정보활용능력의 교육은 인지적, 태도적 측면 모두 대학생들에게 교양과목으로서 효용성이 높은 것으로 나타났다.

전략적 성과측정 및 평가시스템의 개발과 적용에 관한 연구

  • 이승규;라준영;이수열
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 1998년도 추계학술대회 논문집
    • /
    • pp.114-117
    • /
    • 1998
  • Failure to link business or operations strategy with the activities of operations is a critical problem in strategy implementation process. This problem comes from malfunction of a coordination and control mechanism to support the strategic direction by effective communication throughout the firm. A performance measurement and evaluation system (PMES) is thought as a core mechanism to monitor, direct. and induce desirable activities. We have developed a new strategic PMES (SPMES) that can effectively support the manufacturing strategy by utilizing customized performance measures. They are selected from a pool of four distinct but closely related sets of performance measures; financial, market, internal competency, and performance driver. In this paper, we briefly review the structure of the SPMES and explain the change process of PMES into SPMES in manufacturing business units. First we analyze the business environment and manufacturing strategy to identify short- and long-term issues facing the management. Next step is scrutinizing the objectives and activities of every function and process in the business unit. Using the information obtained, we can diagnose the gaps between currently effective PMES and desirable SPMES supporting the strategies. Once the problems in existing system are identified, we reconfigure the existing and new measures to establish a SPMES through a series of analyses, discussions and workshops. In organizing the selected measures in the new system, we use AHP method to reflect the relative importance of the measures in a specific business. Finally, modification or development of information system to support the SPMES wraps up the development process, and implementation begins. We explain the entire process using two cases to clarify the real meanings and the difficulties of PMES change process.

  • PDF