• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.133-137
• /
• 2016

The aims of this study were to analyze the Korean fire fighters' applications for the public worker's compensation between 2011 and 2013 and to suggest a feasible solution for prevention of work-related musculoskeletal disorders. The Korean Ministry of Public Safety and Security provided the complete list of fire fighters' application from January 2011 to December 2013. 510 applicants with chief complaint of musculoskeletal disorders were screened out of all 1596 applicants. Male applicants were 92%. Fire fighters in their early 40's applied most frequently, followed by those in early 30's. Musculoskeletal disorders of fire fighters were reported most frequently in May and June. Regionally, Seoul had most applicants and Jeonbuk showed the highest prevalence. Low back was the most frequently reported body part followed by the knee. Ligament was insured most frequently followed by vertebral disc and bone. The fire fighter's injury occurred while fire extinguish (38.3%), emergency medical service (37.7%), rescue (12.4%), and other duties. Result of this study suggests further investigation on the large variation in regional prevalence and on the injury mechanism of musculoskeletal disorders especially during the fire extinguish and emergency medical service.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• The Korean Journal of Physiology
• /
• v.30 no.2
• /
• pp.237-247
• /
• 1996

This study was carried out to determine the effect of $-6^{\circ}$ head-down bedrest on the cardiovascular and hormonal responses to orthostasis and to evaluate the mechanism of orthostatic intolerance. Ten healthy young men were changed the body position from $-6^{\circ}$ head-down or supine bedrest for 2 hr to $70^{\circ}$ head-up tilt for 20 min. During the bedrest, there were no differences in hemodynamic and hormonal changes between the head-down and the supine positions. However, the tendency of decreased end-diastolic volume and increased cardiac contractility during the later period of 2 hr showed that the cardiovascular adaptation could be accelerated within a relatively short period in the head-down bedrest. During the head-up tilt, presyncopal signs were developed in five subjects of the supine bedrest, and one of the same subjects of the head-down bedrest. In the tolerant subjects, the increase in cardiac contractility and plasma epinephrine level during the bend-up tilt was greater following the head-down bedrest than that following the supine bedrest to compensate for reduced venous return. The intolerant subjects showed the greater decrease in end-diastolic and stroke volume, and the greater increase in heart rate during the head-up tilt than the tolerant subjects. Cardiac contractility and plasma epinephrine level were remarkably increased. However, arterial pressure was not maintained at the level for the appropriate compensation of the reduced venous return. It seems that the tolerance to orthostasis is more effective after the short-term head-down bedrest than after the supine bedrest, and the secretion of epinephrine induces the higher cardiac performance as a compensatory mechanism fur the reduced venous return during the orthostasis following the head-down bedrest than the supine bedrest.

• Environmental Mutagens and Carcinogens
• /
• v.16 no.1
• /
• pp.13-18
• /
• 1996

One mechanism of free-radical production by ethanol is suggested to be through the intracellular conversion of XDH to XO by increased ratio of NADH to NAD. The major mechanism for physiological compensation of cytosolic NADH/NAD balance is the malate/aspartate shutfie. Therefore, it is important to develop the method to improve the efficiency of malate/aspartate shuttle in ethanol metabolism. In the present study, various amino acids and organic acid involved in the shuttle were tested for their functional efficiency in modulating shuttle in the ethanol-perfused rat liver. The rate of ethanol oxidation in the liver perfused with aspartate alone or aspartate in combination with pyruvate, respectively, was increased by about 10% compared to control liver, but not in the tissues perfused with glummate, cysteine or pyruvate alone. Though glummate, cysteine and pyravate did not affect the ethanol oxidation significanfiy, they showed some suppresive effect on the ethanol-induced radical generation monitored by protein carbonylation analysis. Among the tested components, aspartate is confirmed to be the most efficient as a metabolic regulator for both ethanol oxidation and ethanol-induced oxidative stress in our perfusion system. These effects of aspartate would result from NAD recycling by its supplementation through the coupled aspartate aminotransferase/malate dehydrogenase reactions and the malate-aspartate shuttle.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.75-82
• /
• 2009

This paper proposes a method which increases the linearity using an improvement mechanism of Doherty power amplifier and compensates the decrement of efficiency due to improvement of linearity. To verify the method, a 20W power amplifier is designed and implemented. Compared with 2-way Doherty power amplifier, the implemented 3-way Doherty power amplifier with class F shows improved linearity about 10dBc and efficiency about 1.5%. Also, efficiency characteristic has been improved about 3.5% compared with the 2-way Doherty power amplifier while maintaining linearity. This results show that the proposed 3-way Doherty power amplifier with class F is shown to be adequate for improvement of efficiency and linearity. It is expected that the proposed amplifier can be used for various wireless communication system amplifiers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.469-475
• /
• 2017

Workers in industrial fields are highly exposed to accidents or injuries caused by long working hours. An exoskeleton that is able to support the arm muscles of the worker and thereby reduce the probability of an accident and enhance working efficiency could be a solution to this problem. However, existing exoskeletons demand the use of high-priced sensors and motors, which makes them difficult to use in industrial fields. To solve this problem, we developed an arm assisting exoskeleton that consists only of mechanical components without any electronic sensors or motors. The exoskeleton follows the movement of the human arm by shoulder joint and ankle joint. In addition, counterbalance mechanisms are installed on the exoskeleton to support arm strength. The experimental validation of the exoskeleton was conducted using an EMG sensor, confirming the performance of the exoskeleton.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.95-102
• /
• 2006

Nowadays, GPS is used widely, especially in case which needs precise position information, such as car navigation systems and various kinds of position measuring instruments in an outdoor environment. According to their applications, there are many kinds of GPS receivers with different costs and error rates. The maximum error range of the general-purpose GPS receiver is within 30m, though the error rate depends on receiving rate of signal and weather condition. RTK(Real-Time Kinematic) and DGPS(Differential Global Positioning System) have more precise accuracy than the general-purpose GPS. However end users can't afford use them because of their high price and large size of equipments. In order for the end user to obtain precise position information, it is important that GPS receivers has portability and low price. In this study, we introduce a new system that offers precise position information using the DGPS mechanism satisfying low cost and portability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1381-1387
• /
• 2007

Up to now, various continuous-processing systems are used in many industrial applications such as textile machines, paper-making machines, printing machines, and so on. In these applications, the tension forced on the products in the control volume can be changed according to the velocity difference between the feeding roll and the delivery roll. Specially, the tension variation generated by the velocity difference, or the inertial effect can decreases the quality of the products in the textile process. In this paper, the tension control problem in a circular knitting machine system is treated to cope with these problems. Firstly, the tension relationship in the winding mechanism of general continuous-processing systems is modeled. Next, to effectively drive the feeding and delivery rolls in the circular knitting machine system, a new tension control method is presented by considering the inertia compensation and the velocity difference between the feeding roll and the delivery roll. Through the experimental works, it is shown that the proposed tension control method can be used to improve the performance of tension control in the control volume of the given circular knitting machine system.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.261-273
• /
• 2008

Multimedia service whose use is rapidly increasing supports effective services to convert and transmit multimedia data based on network speed, noise circumstance, terminal computation, and type of contents for satisfying QoS. For supporting information protection of multimedia service, it offers middle level of singular security service or security mechanism which is based on policy of service provider, depending on present terminal computation and type of contents. It can support security mechanism for more effective multimedia service, if we study security of application layer and network layer for supporting multimedia service. In this paper, we propose Multimedia security framework reflected on quantitative analysis of the WLAN(Wireless Local Area Network) mesh network security using the utility function in the level of the sorority, violation and addictive compensation model.