• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.37-45
• /
• 2007

A lot of conventional algorithms has tried to cancel the Residual Frame Synchronization Error (RFSE), which causes the performance degradation of channel estimation when using interpolation in lattice-type pilot-aided Time Division Duplex (TDD) OFDM systems. Among them, a pre- and post-compensation method has been attractive to eliminate the effects of RFSE, providing good performance but requiring high computational complexity. In this paper we propose a new method which lowers computational costs by adjusting the starting point of TDD OFDM systems' FFT window in order to compensate for the RFSE. For the performance verification, we apply the proposed method to IEEE 802.16e standard and also estimate additionally required computational power of it compared to the pre- and post-compensation method. Simulation and implementation results show that the proposed algorithm has performance similar to the conventional method and is very efficient with low power implementation, requiring only 4.9 % of the power which the conventional method needs additionally.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.653-658
• /
• 2013

This paper describes a new sensorless speed control method for permanent magnet synchronous motor(PMSM) using direct torque control(DTC). The direct torque control offers fast torque response, lesser hardware and processing costs as compared to vector controlled drives. In this paper the current error compensation technique is applied for sensorless speed control of synchronous motor. Through this method, the controlled stator voltage is applied to the synchronous motor so that the error between stator currents of the mathematical model and the actual motor can be forced to decay to zero as time proceeds and therefore, the motor speed approaches to the setting value. Especially, any PI controllers are not necessary in this control method. The simulation results indicate good speed and load responses from the low speed range to the high.

• Journal of Technology Innovation
• /
• v.21 no.1
• /
• pp.1-26
• /
• 2013

The objectives of this paper are to analyze the effect of government R&D expenditure on employment in the Korean manufacturing sector in which employment is rapidly declining. According to the results of our empirical analysis, government R&D expenditure decreases the level of employment in Korean manufacturing sector in short term period, but it has positive effect on employment by compensation effect in the middle and long term period. Second, the effect of private R&D expenditure on job creation is three times larger than that of government R&D expenditure. Third, costs of labor and capital has negative effect on employment. This study is believed to help understanding the relation between R&D expenditure and employment, and providing policy implications of how to plan and manage government R&D expenditure as a tool of job creation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.935-939
• /
• 2015

This paper describes sensorless speed control of brushless DC motors by using direct torque control. Direct torque control offers fast torque response, robust specification of parameter changes, and lower hardware and processing costs compared to vector-controlled drives. In this paper, the current error compensation method is applied to the sensorless speed control of a brushless DC motor. Through this control technique, the controlled stator voltage is applied to the brushless DC motor such that the error between the stator currents in the mathematical model and the actual motor can be forced to decay to zero as time proceeds, and therefore, the motor speed approaches the setting value. This paper discusses the composition of the controller, which can carry out robust speed control without any proportional-integral (PI) controllers. The simulation results show that the control system has good dynamic speed and load responses at wide ranges of speed.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.2 s.46
• /
• pp.299-312
• /
• 1994

This survey was performed to obtain the basic information for the prevention and management of occupational low back injury (LBI). The subjects of this survey were 952 workers (male, 892 ; female, 60) who had taken occupational LBI in some industries of Pusan area from January 1 to December 31, 1991. Observation period was 2.6 years from the beginning to the end of medical treatment. The obtained results were summarized as follows ; 1. The proportion of LBI workers was 15.9% of the workers who had taken any occpational injuries and 0.32% of all workers in this surveyed area. 2. 8.0% of the workers had taken LBI on the 1st day of employment and 55.2% of the workers were within one year, 91.4% of the workers were within 10 years according to cumulative frequency distribution. 3. Handling of heavy objects was the most common cause of LBI (32.0%) and fall down (26.9%) and slip down (16.3%) were the next in order. 4. The most common causes of both lumbar sprain and HNP were handling of heavy objects and that of lumbar fracture was fall down. 5. The mean duration for medical treatment of LBI workers was 143 days. 6. The total direct compensation cost for LBI workers was 6,736 million Won and the proportion of medical, resting, disability compensation costs were 25.0%, 37.0%, 38.0 % respectively. 7. The percentages of retreated workers and disabled workers were 11.9% (113 persons) and 22.9% (218 persons) of total LBI workers respectively.

• Management & Information Systems Review
• /
• v.32 no.2
• /
• pp.107-135
• /
• 2013

Today, the consumer complaining behavior is recognized as a valuable source of marketing information in the company. Therefore, studies on the factors that lead to consumer complaints have been done. In the previous research on consumer complaining behavior, the factors influencing the complaining behavior was focused on the personal characteristics, but factors under company control was rarely identified. We try to identify factors under company's control that have a effect on the likelihood of success of complaining and complaining perceived costs. These factors are tendency to compensate emotionally, tendency to compensate materially, accessibility to complain, empowerment to manage complaint. Through empirical analysis, we proposed company's strategies to encourage consumer's complaint and gave theoretical and managerial implications.

• Journal of Arbitration Studies
• /
• v.10 no.1
• /
• pp.92-113
• /
• 2000

Products liability refers to the liability of any or all parties along the chain of manufacture of any product for damage caused by that product. This includes the manufacturer of component parts (at the top of the chain), an assembling manufacturer, the wholesaler, and the retail store owner (at the bottom of the chain). Products containing inherent defects that cause harm to a consumer of the product, or someone to whom the product was loaned, given, etc., are the subjects of products liability suits. The goal of products liability system should be to maximize consumer welfare by efficiently providing just compensation for injuries incurred and deterring future injuries without unreasonably impeding the supply of the goods and services to consumers. Some advanced countries, apart from relying on products liability systems, also apply other policies and legislation directly aimed at the safety of the consumer. The application of general safety policies as well as products liability rules is not costless. An efficient system will not eliminate risk from society. An efficient system ... that maximises consumer welfare ... maximises the benefits while minimising the costs. Products liability claims can be based on negligence, strict liability, or breach of warranty of fitness depending on the jurisdiction where the claim is based. In view of international business and law circumstances, it should be stressed that international enterprises in Korea should consider how to cope with the situation of international transaction. International enterprises should have a correct perception about products liability which is to contribute the stabilization and improvement of the people's life and the sound develpement of the national economy. Products liability system creates incentives that influence behaviour and performance in ways that are desirable, such as more diligent monitoring to prevent defective products from reaching the market-place. At the same time, any liability system will impose burdens that are undesirable, such as greater costs imposed on business and consumers and reduced avaiability of consumer goods. The concern for society is to balance. The ideal situation is where the cost imposed on producers of goods and services pushes them to a desirable level of care but not so far that producers reach undesirable level of caution that may deprive consumers unnecessarily of the benefits from new and innovative products.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.3
• /
• pp.147-157
• /
• 2020

With the increasing obligation to reduce greenhouse gas emissions to the building sector, the government has been gradually expanding its obligation to zero-energy buildings since 2020. Since the ZEB certification took effect in 2017, 48 preliminary and main certifications have been completed as of March 2019, and most of them are public buildings or even certified, but have earned Grade 5 of ZEB. This means that compared with the number of annual building permits registered in Korea, the figure is insignificant, and that it receives little if not mandatory. Therefore, this study investigated empirical cases of ZEB additional construction cost and conducted cost benefit analysis according to changes in ZEB additional construction cost based on a preliminary feasibility analysis project recently conducted by the KDI. In addition, considering the public buildings, the social costs were considered, and the cost-benefit analysis method was the same as the KDI's preliminary feasibility analysis method. The analysis shows that if the ratio of ZEB additional construction cost is more than 5 percent, it is analyzed that there is no economic feasibility, and considering that the ratio of additional construction cost in the cases of ZEB in Korea is 17 percent to 38 percent, it will not be easy to obtain ZEB certification in terms of cost. Finally, to narrow these differences in cost and economic aspects, the overseas low energy and ZEB incentive examples proposed measures such as the concept of subsidy payment in Illinois and the compensation of social costs to private ZEB.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.23-30
• /
• 2001

The Financial Cost in construction industry today is tend to increasing the burden of business management on account of lowered profit due to the mege-competition and decreasing investment of construction, multi-interfacing. system in it's attribute and various unreasonable governeing enactments. It is becoming the most important aspects for the management of construction business on how to preserve the profit from the various risks. The ultimate aims of this study is to pursue the contractual equity between the parties by establishing the fundamentals of framework for the compensation of Financial Charges through the review of the precedent studies and analysis of inquiries. As a result of the study, improvable measures for any practical inequality and/or institutional defects of current public contract system in recovering the Financial Cost incurred to Contractor are delivered as below; (1) $\lceil$Working Rules for Construction Industry Accounting Standards$\rfloor$ shall be amended and supplemented so as the incurred interest to be recognized as an operative cost by live return over the collection period. (2) The long-term phase contract system of which is enforcing contractor to bear the certain losses shall be diminished and/or abolished gradually. (3) The unreasonable legislations on compensation for financial cost in contract conditions shall be improved in response to practical circumstances. (4) The use of Critical-Path Method for Time Management shall be activated together with EVMS. (5) Independent application of Contract Enactments for construction industry shall be adopted.

• Environmental and Resource Economics Review
• /
• v.27 no.1
• /
• pp.139-160
• /
• 2018

Using survey data of selected 1,349 individuals nationwide in Korea, we measure the influencing factors for the acceptance of nuclear power and estimates the probability of acceptance under several scenarios with different percentages of monetary compensation. Results of panel probit demonstrate that nuclear risk aversion tendency was found to be higher in case of female, younger age, past experience of extreme event such as an earthquake. However, the residents' residency nearby the nuclear power plant was not related to the risk-aversion tendency. In addition, we found that the nuclear acceptance is improved when the monetary compensation rate is increased. Although the policy demand intended to reduce GHG emissions in South Korea, the expansion of nuclear power is not be easy due to the occurrence of recent strong earthquakes because the risk attitude of an individual is influenced by subjective assessments formed through direct and indirect experiences of natural disasters such as an earthquake. Our results suggest that the opposition to construction of nuclear power plant is expected to be further intensified especially when combined with the experiences of threatening earthquakes. As a result, the debate and policy conflicts of nuclear power plants will consistently continue and large social costs are apparent for the acceptance of nuclear power plant.