• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.436-444
• /
• 2017

The purpose of this study is to investigate the research trends related to work rehabilitation in the field of occupational therapy based on studies published in the American Journal of Occupational Therapy (AJOT). Thirty five articles in the AJOT from January, 2000, to June, 2016, were reviewed. Descriptive statistics were used to classify the articles according to their study methodology, evidence level, study subjects, and so on. When they were categorized according to the study methodology, eight studies (22.9%) were published as review or meta-analyses and 7 studies (20%) as qualitative and naturalistic inquiries. Group comparison/correlational and experimental outcome methods were used in 4 studies (11.4%). 3 studies (8.6%) were conducted using a case study/single-subject design or survey. 14 studies (40.0%) were evidence level V ones and 7 studies (33.3%) dealt with mental illness. When they were classified according to the study subjects, 25 studies (71.4%) were related to the work-rehabilitation process and 10 studies (28.6%) were related to the meaning and value of work. Through this study, we were able to determine the main research trends, study methodology, study participants, and evidence level related to vocational rehabilitation in the field of occupational therapy. Additionally, it is necessary to examine studies in the field of vocational rehabilitation, which have a high level of evidence and include various kinds of participants, as well as the process of vocational rehabilitation.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.107-122
• /
• 2015

PURPOSES : The use of virtual driving tests to determine actual road driving behavior is increasing. However, the results indicate a gap between real and virtual driving under same road conditions road based on ergonomic factors, such as anxiety and speed. In the future, the use of virtual driving tests is expected to increase. For this reason, the purpose of this study is to analyze the gap between real and virtual driving on same road conditions and to use a calibration formula to allow for higher reliability of virtual driving tests. METHODS : An intelligent driving recorder was used to capture real driving. A driving simulator was used to record virtual driving. Additionally, a virtual driving map was made with the UC-Win/Road software. We gathered data including geometric structure information, driving information, driver information, and road operation information for real driving and virtual driving on the same road conditions. In this study we investigated a range of gaps, driving speeds, and lateral positions, and introduced a calibration formula to the virtual record to achieve the same record as the real driving situation by applying the effects of the main causes of discrepancy between the two (driving speed and lateral position) using a linear regression model. RESULTS: In the virtual driving test, driving speed and lateral position were determined to be higher and bigger than in the real Driving test, respectively. Additionally, the virtual driving test reduces the concentration, anxiety, and reality when compared to the real driving test. The formula includes four variables to produce the calibration: tangent driving speed, curve driving speed, tangent lateral position, and curve lateral position. However, the tangent lateral position was excluded because it was not statistically significant. CONCLUSIONS: The results of analyzing the formula from MPB (mean prediction bias), MAD (mean absolute deviation) is after applying the formula to the virtual driving test, similar to the real driving test so that the formula works. Because this study was conducted on a national, two-way road, the road speed limit was 80 km/h, and the lane width was 3.0-3.5 m. It works in the same condition road restrictively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.4.1-4.10
• /
• 2019

Background: The mandibular third molar (M3) is typically the last permanent tooth to erupt because of insufficient space and thick soft tissues covering its surface. Problems such as alveolar bone loss, development of a periodontal pocket, exposure of cementum, gingival recession, and dental caries can be found in the adjacent second molars (M2) following M3 extraction. The specific aims of the study were to assess the amount and rate of bone regeneration on the distal surface of M2 and to evaluate the aspects of bone regeneration in terms of varying degree of impaction. Methods: Four series of panoramic radiographic images were obtained from the selected cases, including images from the first visit, immediately after extraction, 6 weeks, and 6 months after extraction. ImageJ software^® (NIH, USA) was used to measure linear distance from the region of interest to the distal root of the adjacent M2. Radiographic infrabony defect (RID) values were calculated from the measured radiographic bone height and cementoenamel junction with distortion compensation. Repeated measures of analysis of variance and one-way analysis of variance were conducted to analyze the statistical significant difference between RID and time, and a Spearman correlation test was conducted to assess the relationship between Pederson's difficulty index (DI) and RID. Results: A large RID (> 6 mm) can be reduced gradually and consistently over time. More than half of the samples recovered nearly to their normal healthy condition (RID ≤ 3 mm) by the 6-month follow-up. DI affected the first 6 weeks of post-extraction period and only showed a significant positive correlation with respect to the difference between baseline and final RID. Conclusions: Additional treatments on M2 for a minimum of 6 months after an M3 extraction could be recommended. Although DI may affect bone regeneration during the early healing period, further study is required to elucidate any possible factors associated with the healing process. The DI does not cause any long-term adverse effects on bone regeneration after surgical extraction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.247-254
• /
• 2008

H.264 provides a good coding efficiency compared with existing video coding standards, H.263, MPEG-4, based on the use of multiple reference frame for variable block size motion estimation, quarter-pixel motion estimation and compensation, $4{\times}4$ integer DCT, rate-distortion optimization, and etc. However, many modules used to increase its performance also require H.264 to have increased complexity so that fast algorithms are to be implemented as practical approach. In this paper, among many approaches, fast mode decision algorithm by skipping variable block size motion estimation and spatial-predictive coding, which occupies most encoder complexity, is proposed. This approach takes advantages of temporal and spatial properties of fast mode selection techniques. Experimental results demonstrate that the proposed approach can save encoding time up to 65% compared with the H.264 standard while maintaining the visual perspectives.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.64-72
• /
• 2012

Synchronization including timing recovery, frequency offset compensation, and frame synchronization is most important signal processing block in all wireless/wired communication systems. In most communication systems, synchronization schemes based on training sequences or preambles are used. WLAN standards of 802.11a/g/n released by IEEE are based on OFDM systems. OFDM systems are known to be much more sensitive to frequency and timing synchronization errors than single carrier systems. A loss of orthogonality between the multiplexed subcarriers can result in severe performance degradations. The starting position of the frame and the beginning of the symbol and training symbol can be estimated using correlation methods. Correlation processing functionality is usually complex because of large number of multipliers in implementation especially when the reference signal is non-binary. In this paper, a simple correlation based synchronization scheme is proposed for IEEE 802.11a/g/n systems. Existing property of a periodicity in the training symbols are exploited. Simulation and implementation results show that the proposed method has much smaller complexity without any performance degradation than the existing schemes.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.63-69
• /
• 1999

The electrical properties of rf-magnetron sputtered $Ba_{0.5}Sr_{0.3}TiO_3$ (BST) capacitors were investigated by varying annealing temperature and atmosphere of the rapid thermal annealing (RTA). The electrical properties of Pt/BST/Pt capacitors were found to strongly depend on the RTA condition. It seems that the dependence of the electrical properties of the Pt/BST/Pt capacitors on the RTA condition is related to the oxygen vacancies in BST thin films. In order to clarify the relation between the oxygen vacancies and the electrical properties of Pt/BST/Pt capacitors, we have examined the two different annealing methods. One annealing method was performed in $O_2$ gas and the other was done in $O_2$-plasma at the same condition of 450$^{\circ}C$, 20 mtorr. It was found that the leakage current densities of $O_2$-plasma annealed capacitor were much lower than those of $O_2$ annealed capacitor. The dielectric constants of $O_2$ annealed capacitor decreased about 14% comparing with those of as-deposited. In contrast, there was no decrease in the dielectric constant of $O_2$-plasma annealed. These results indicate that $O_2$-plasma annealing is very effective in compensation the oxygen vacancies in BST thin films. It can be also concluded that the oxygen vacancies greatly affect the electrical properties of Pt/BST/Pt capacitors.

• Journal of Agricultural Extension & Community Development
• /
• v.4 no.1
• /
• pp.245-255
• /
• 1997

The objectives of this study were (1) to analyze the degree of rice farmers' knowledge, attitude and practice (KAP) of the Integrated Pest Management (IPM), (2) to determine the related variables for decisions on pest control, and (3) to indicate desirable direction for IPM farmers' field training. The study was carried out through a questionnaire method and sane interviewing survey of 300 rice farmers by the IPM trainers who participated in IPM training in 1994 or 1995. The data were collected from 268 respondents to the questionnaire consisted of KAP and related variables. The major findings of the study were as follows: 1. The KAP score of the farmers concerning IPM were 71 for knowledge, 76.2 for attitude and 74 for practice on average. 2. The KAP score was higher for farmers cultivating larger land size and for those with more participation in IPM training. Also the KAP was higher for the members of the Rural Leaders Association and Future Farmers Association than any other groups. 3. The IPM farmers had strong positive attitudes towards the resistant rice varieties. However, the practical pest control rate of the IPM farmers was low for conservation of natural enemies, timely control following occurrence and plant compensation what few pest were presence in the paddy field. 4. The KAP Score on the economic threshold level and safe pesticide use was relatively low for elder farmers and for those with lower educational background. Most farmers preferred calendar spraying methods for preventive pest control to any other method of pest control. Knowledge was relatively low on pesticide and environmental contamination. 5. Decision making on pest control depends on the extension officer and rural leader's opinion. The survey method for pest occurrence by directly counting pest in the field was only 22.9% among the farmers of this study. 6. Most farmers used pesticide for preventive pest occurrence even when pest didn't occur in their field. The average number of pesticide applications per cropping season in rice field was 3.7 times, and the number of mixed pesticides per application was 4.3 kinds of pesticides. Also 6 recommendations were made in this study for improvement of IPM farmer's training.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.2
• /
• pp.35-44
• /
• 2002

The translation and the rotation of camera occur global motion which affects all over the frame in video sequence. With the video sequences containing global motion, it is practically impossible to extract exact video objects and to calculate genuine object motions. Therefore, high compression ratio cannot be achieved due to the large motion vectors. This problem can be solved when the global motion compensated frames are used. The existing camera motion estimation methods for global motion compensation have a large amount of computations in common. In this paper, we propose a simple global motion estimation algorithm that consists of linear equations without any repetition. The algorithm uses information .of symmetric points in the frame of the video sequence. The discriminant conditions to distinguish regions belonging to distant view from foreground in the frame are presented. Only for the distant view satisfying the discriminant conditions, the linear equations for the panning, tilting, and zooming parameters are applied. From the experimental results using the MPEG test sequences, we can confirm that the proposed algorithm estimates correct global motion parameters. Moreover the real-time capability of the proposed technique can be applicable to many MPEG-4 and MPEG-7 related areas.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.26-34
• /
• 2007

Intelligent projection system indicates a system that displays desired images on an arbitrary screen in an arbitrary environment using projector without noticeable image distortion. In recent years, projectors have become widespread and ubiquitous due to their increasing capabilities and declining cost. Moreover, the size of projectors is getting smaller and handhold projectors are emerging. Thanks to these advances, the demand for intelligent projection system has been significantly increased and the demand has led to remarkable progress of the related techniques or technologies to intelligent projection system However, there are still some environments (or conditions, mainly dynamic ones) that intelligent projections systems cannot handle and they have limited the application area of intelligent projection systems. This paper exemplifies such environments (e.g. specular screen, dynamic screen) and propose effective solutions (i.e. multiple overlapping projectors, complementary pattern embedding) for thor And the usefulness of the solutions is verified through experimental results and user evaluation. Notice that the environments are considered not simultaneously but independently because it is impossible to consider them simultaneously by simply combining the solutions for each. Acually, a totally different solution would be necessary to consider them simultaneously. Therefore, we expect that the proposed methods would largely extend the application area of intelligent projection systems except for severely arbitrary environment.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.246-255
• /
• 2007

The floating image system (FIS) is a device to display input source in the space between fast surface of the display and an observer and it provides pseudo 3D depth to an observer when input source as real object or 2D image was displayed through the optical lens system in the FIS. The Advanced floating image system (AFIS) was designed to give more effective 3D depth than existing FIS by adding front and rear depth cues to the displayed stereogram, which it was used as input source. The magnitude of disparity and size of stereogram were strongly related each other and they have been optimized for presenting 3D depths in a non-optical lens systems. Thus, if they were used in optical lens system, they will have reduced or magnified parameters, leading to problem such as providing incorrect 3D depth cues to an observer. Although the size of stereogram and disparity were demagnified by total magnifying power of optical system, the viewing distance (VD) from the display to an observer and base distance (BD) for the gap between the eyes were fixed. For this reason, the quantity of disparity in displayed stereogram through the existing FIS has not kept the magnifying power to the total optical system. Therefore, we proposed the methods to provide correct 3D depth to an observer by compensating quantity of disparity in stereogram which was satisfied to keep total magnifying power of optical lenses system by AFIS. Consequently, the AFIS provides a good floating depth (pseudo 3D) with correct front and rear 3D depth cues to an observer.