While computer environments have been dramatically developed in recent years, as the building structures become larger, the structural analysis models are also becoming more complex. So there is still a need to model one shear wall with one finite element. From the viewpoint of the concept of FEA, if one shear wall is modeled by one finite element, the result of analysis is not likely accurate. Shear wall may be modelled with various finite elements. Among them, considering the displacement compatibility condition with the beam element connected to the shear wall, plane stress element with in-plane rotational stiffness is preferred. Therefore, in order to analyze one shear wall with one finite element accurately, it is necessary to evaluate finite elements developed for the shear wall analysis and to develop various plane stress elements with rotational stiffness continuously. According to the above mentioned need, in this study, the theory about a plane stress element using hierarchical interpolation equation is reviewed and stiffness matrix is derived. And then, a computer program using this theory is developed. Developed computer program is used for numerical experiments to evaluate the analysis results using commercial programs such as SAP2000, ETABS, PERFORM-3D and MIDAS. Finally, the deflection equation of a cantilever beam with narrow rectangular section and bent by an end load P is derived according to the elasticity theory, and it is used to for comparison with theoretical solution.
Kalgutkar, Akshay Prakash;Banerjee, Sauvik;Rajanna, T.
Steel and Composite Structures
/
제42권4호
/
pp.427-446
/
2022
Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (ds/bs) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener's depth to width ratio also significantly influences the buckling characteristic.
지중구조물에 많이 사용되는 파형강판 콘크리트 합성단면은 단면의 어려움으로 인하여 아직까지 보수적인 설계방법을 적용하고 있다. 본 연구에서는 LRFD와 LSD의 두가지 한계상태 설계방법을 사용하여 합성단면의 휨과 압축에 대한 소성해석을 실시하고자 하였다. 실험결과에 대한 분석결과 압축강도는 LRFD 해석값이 보다 안전측으로 해석되었으며, 강판의 강재비 보다는 콘크리트 압축강도의 영향이 큰 것으로 분석되었다. 휨강도는 LSD에 의한 해석치가 실험결과와 잘 일치하는 것으로 분석되었으며, 강판 인장강도의 영향을 받는 Hogging moment는 연결부 등의 영향에 의해 강도증가율이 감소하였으나, Sagging moment는 강재비에 따라 선형적으로 증가하는 것으로 분석되었다.
Recently, investigation on metallization is a key for a stretchable display. Amorphous metal such as Ni and Zr based amorphous metal compounds are introduced for a suitable material with superelastic property under certain stress condition. However, Ni and Zr based amorphous metals have too high resistivity for a display device's interconnectors. In addition, these metals are not suitable for display process chemicals. Therefore, we choose an aluminum based amprhous metal Al-Mo as a interconnector of stretchable display. In this paper, Amorphous Forming Composition Range (AFCR) for Al-Mo alloys are calculated by Midema's model, which is between 0.1 and 0.25 molybdenum, as confirmed by X-ray diffraction (XRD). The elongation tests revealed that amorphous Al-20Mo alloy thin films exhibit superior stretchability compared to pure Al thin films, with significantly less increase in resistivity at a 10% strain. This excellent resistance to hillock formation in the Al20Mo alloy is attributed to the recessed diffusion of aluminum atoms in the amorphous phase, rather than in the crystalline phase, as well as stress distribution and relaxation in the aluminum alloy. Furthermore, according to the AES depth profile analysis, the amorphous Al-Mo alloys are completely compatible with existing etching processes. The alloys exhibit fast etch rates, with a reasonable oxide layer thickness of 10 nm, and there is no diffusion of oxides in the matrix. This compatibility with existing etching processes is an important advantage for the industrial production of stretchable displays.
본 연구는 쉴드 TBM 테일 보이드 동시주입용 가소성 그라우트의 적합성을 규명하기 위하여 강도특성, 수중 재료분리현상 및 점도특성 실험을 실시하였다. 무기계 가소성 그라우트는 쉴드 TBM 뒤채움 그라우트 주입 시 시멘트, 물, MG-A로 구성된 A액과 스칼렛, 물, MG-B로 구성된 B액을 주입하는 2액성 그라우트 주입공법이다. 적정 배합비로 제작된 무기계 가소성 그라우트의 일축압축강도는 초기강도 및 장기강도 기준을 만족하는 결과를 보였다. 지하수가 존재하는 현장에서 그라우트 주입 시 발생하는 재료분리현상을 관찰하기 위하여 기존 현장에서 적용된 규산계 그라우트와 무기계 가소성 그라우트를 비교하였으며, 그 결과 규산계 그라우트에서 발생하는 재료분리 현상이 무기계 가소성 그라우트에서는 관찰되지 않았다. 또한 무기계 가소성 그라우트의 장거리 이송에 대한 현장 적용성을 확인하기 위하여 A, B액의 점도를 측정한 결과 A, B액 모두 120분 이상 2000 cP 이하가 측정되었다. 이러한 결과는 추후 현장적용 시 A, B액의 원활한 이송이 가능한 점도를 확보하고 있음을 확인하였다.
본 연구에서는 국내 및 미국의 항공기 기술기준과 기술표준품 표준서를 분석하여 수송류 항공기용 금속계 제동패드의 비행시험 인증을 위한 합치성 증명 시 요구되는 다이나모시험절차를 도출하였다. 제동장치의 설계개조는 중대한 변경으로 분류되어 부가형식증명 및 부품등제작증명이 동시에 요구된다. 다이나모시험 항목은 미국의 제동장치 기술표준품 표준서인 TSO-C135a 규정에 따라 비행시험의 적합성을 판단하는 기준으로 비행시험 시 요구되는 주요 시험항목 중 설계착륙-정지 시험, 가속-정지 시험 및 최대 하중상태의 착륙-정지 시험을 선정하였다. 다이나모시험 조건은 항공기 제조사가 제공하는 주요 사양에 따라 정해지며, 제동패드의 조건, 감속도 및 시험횟수 등은 TSO-C135a 규정에 따라 정의하였다.
장기간 관측된 자료를 기반으로 그 시계열의 장주기나 경향을 분석할 때 선행되어야 할 조건은 과거에 관측된 자료와 현재에 관측된 자료가 비교 가능해야 한다는 점이다. 이러한 자료의 연속성을 확보하기 위해서는 장기 관측에 사용된 기기들 간에 호환성이 보장되어야 한다. 우리나라에서 가장 긴 에디 공분산 플럭스 관측 역사를 가지고 있는 광릉 활엽수림에서 다양한 기체분석기가 플럭스 관측에 사용된 가운데, 2015년 7월 과거 10년 이상 사용되었던 개회로 기체 분석기(Model LI-7500, LI-COR, Inc.)에서 봉폐회로 기체분석기(Model EC155, Campbell Scientific, Inc.)로 교체되었다. 기체분석기가 완전히 교체되기 전 두 기체분석기로 동시에 관측되었던 2015년 8월부터 12월까지 5개월의 기간 동안 모은 이산화탄소와 수증기(잠열) 플럭스를 서로 비교해보았다. 이산화탄소 플럭스는 일평균기온이 영상이었던 시기에 기체분석기 간의 큰 차이는 없었으나, 영하로 떨어지면서 개회로 기체분석기의 경우 기기에서 발생하는 열 때문에 이산화탄소 플럭스가 양의 값(이산화탄소 발원)에서 0 또는 음의 값(이산화탄소 중립 또는 흡원)으로 편향됨이 확인되었다. 잠열 플럭스는 봉폐회로 기체분석기에서 관측된 값이 주파수 반응 보정을 통해 수증기의 튜브 감쇄 효과를 보정하였음에도 불구하고, 개회로 기체분석기에서 관측된 값보다 평균적으로 9% 정도 작았으며, 5개월 동안 적산 시 20% 이상 차이(봉폐회로: 166 mm, 개회로 211 mm)났다. 본 연구결과는 광릉 활엽수림에서 관측된 장기 플럭스 자료 분석 시, 개회로 기체분석기의 겨울철 가열 효과에 대한 추가적인 공기밀도 보정의 필요성과 함께 봉폐회로 기체분석기에서 나타나는 잠열 플럭스의 과소평가 경향에 대한 이해가 수반되어야 함을 시사한다.
훼손된 문화재의 안정적인 보존 방안을 제안하는데 있어서 수많은 접근방법들이 있으며 이 방법들은 검증절차가 필수적이다. 또한 보존행위 이후의 예상되는 결과물들은 긍정적 결과로 도출되어야 하는 필연성을 가지고 있다. 보존행위는 문화재가 갖는 고유한 다양성, 특수성 등등의 여러 사항들을 고려한 명확한 해법을 찾는 행위는 당연히 쉽지 않은 과제이다. 또한 기존에 이미 검증된 방법론이나 접근법이라 하더라도 그 대상이 처한 상황이나 조건에 의해 원점에서 재고해야 되는 경우도 있다. 문화재보존행위에 대한 안정적 방법을 구현하기 위해서는 많은 시행착오가 불가피하다. 이러한 시점에서 레이저를 이용한 문화재의 적용은 이미 그 효율성에 대해서 일부가 검증되었음에도 불구하고 아직까지 재질별 적용 호환에 대한 검증이나 연구가 미비하다. 레이저빔의 특성상 모든 문화재 재질에 대한 적용은 한계가 있지만, 비접촉성 접근방법이라는 여타 클리닝방법과 다른 기본 원리이기 때문에 그 특성을 장점으로 활용하여 안정성을 확보하고자 하였다. 이러한 행위 과정은 공초점레이저주사현미경(CLSM)을 활용하여 채색안료와 레이저 광에 대한 작용반응 등의 일련의 과정을 관찰하였다. 레이저빔과 여러 종류의 채색안료들과의 반응과정에서 발생되는 문제점이나 클리닝기법으로써의 효율성을 동시에 실험하여 실제 문화재에 대한 적용 범위 선정이나 적용 이후의 결과물을 예측하는데 도움을 주고자 하였다.
본 연구에서는 연안지역의 방재를 위하여 외해에 방조제를 설치하였을 때 유입하천의 홍수량을 고려하여 만내의 2차원 수리분석을 실시하였다. 대상지역으로 영산강과 목포항 해역을 선정하였으며, 먼저 영산강 살리기 사업으로 인한 하상준설 및 하도변화에 따른 영산강의 수위영향을 검토하기 위하여 HEC-RAS 모형을 적용하여 1차원수리분석을 실시하였다. 또한, 전세계적으로 사용되고 범용 및 상용화 되어있는 2차원 동수역학 모형인 SMS의 CMS-Flow 모델을 이용하여 외해에 Harbor Gate 설치를 통한 2차원 수리분석을 하고, 영산강의 홍수량에 대한 수리학적 흐름의 특성을 분석함으로써 2차원 모형의 적합성을 검토하였다. 2차원 수리분석은 방조수문 설치 유 무와 내수경계조건으로 영산강 유입량 적용 유무을 고려한 4가지 경우에 대하여 외해 경계조건을 부여하여 실시하였으며, 2차원 모형의 적용 결과 방조수문 설치로 인하여 목포항 해역의 해수면 변화는 영산강 하구둑의 방류량이 지배적이며, 방조수문과 하구둑에 의해 만들어진 저수지의 용적량이 방류량의 용적에 비해 많이 부족하므로 방조수문 설치시 영산강 하구둑과 방조수문의 유기적인 운영이 필요하다고 판단된다.
본 연구는 조직공학용 지지체로 사용될 막을 개발하기 위한 초도 연구 수행으로, 염화나트륨(NaCl)을 기공형성체로 혼합한 폴리카프로락톤(PCL)용액을 유리 캐스팅판에 분주한 후 필름 어플리케이터를 이용하여 다공성 PCL필름을 성형하였다. 성형된 필름은 건조 후 증류수에 침지시켜 NaCl을 추출하여 최종 멤브레인형 다공성 지지체를 제조하였다. 3차원 다공망을 형성시키기 위하여 NaCl을 기공형성체로 이용하였으며 $4^{\circ}C$, 실온, $40^{\circ}C$의 세 가지 건조조건에 따른 다공망의 형성과 형태를 주사전자현미경(SEM)을 이용하여 관찰 하였으며 기초적인 안전성 확보를 위한 세포독성평가를 시행하였다. 세 가지의 건조조건별 결과에서는 실온 건조조건에서 거대기공과 미세기공이 혼재된 3차원 다공망이 우수하게 형성된 것이 관찰되었으며 세포독성 시험결과 ISO10993-5 규격의 세포독성 판단기준에 따라 grade 2(mildly cytotoxic)로 나타난바 생체용으로 적합하다고 볼 수 있다. 본 연구를 통하여 멤브레인형 다공성 지지체 제조에 건조조건이 3차원 다공망의 형성 및 거대기공과 미세기공이 함께 형성되는 것에도 영향을 미치는 것으로 나타났으며 이 결과는 다공성 멤브레인 지지체의 분해성 조절 및 약물 담지 효과를 개선하기 위한 연구에서 다공도의 조절에 대한 기초적인 공정이 될 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.