• Advances in environmental research
• /
• v.10 no.1
• /
• pp.87-103
• /
• 2021

Anaerobic digestion (AD) refers to the biological process which can convert organic substrates to biogas in the absence of oxygen. The aim of this study was to determine the capability of feedstock to produce biogas and to quantify the biogas yield from different feedstocks. A co-digestion approach was carried out in a continuous stirred tank reactor operated under mesophilic conditions and at a constant organic loading rate of 0.0756 g COD/ L.day, with a hydraulic retention time of 25 days. For comparison, mono-digestion was also included in the experimental work. 2 L working volumes were used throughout the experimental work. The seed culture was obtained from composting as substrate digestion. When the feedstock was added to seeding, the biogas started to emit after three days of retention time. The highest volume of biogas was observed when the seeding volume used for 1000mL. However, the lowest volume of biogas yield was obtained from both co-digestion reactors, with a value of 340 mL. For methane yield, the highest methane production rate was 0.16 L CH4/mg. The COD with yield was at 8.6% and the lowest was at 0.5%. The highest quantity of methane was obtained from a reactor of Euphorbiaceae peel with added seeding, while the lowest methane yield came from a reactor of Euphorbiaceae stems with added seeding. In this study, sodium bicarbonate (NaHCO3) was used as a buffering solution to correct the pH in the reactor if the reactor condition was found to be in a souring or acidic condition.

• Ocean and Polar Research
• /
• v.36 no.2
• /
• pp.111-119
• /
• 2014

This study examined the spatial and temporal variation of dissolved inorganic radiocarbon in the East Sea. Five vertical profiles of radiocarbon values were obtained from samples collected in 1999 in three basins (Japan Basin, Ulleung Basin, Yamato Basin) of the East Sea. Radiocarbon values decreased from 63- 85‰ at the surface to about -50‰ with increasing depth (up to 2,000 m) and were nearly constant in the layer deeper than 2,000 m in all basins. Radiocarbon values did not show significant basin-to-basin differences in the surface and the bottom layers. In the intermediate layer (200-2,000 m), however, they decreased in the order of Japan Basin > Ulleung Basin > Yamato Basin, which is consistent with the suggested circulation pattern in the intermediate layer of the East Sea. Radiocarbon was found to have decreased at ~2%/year in the surface water of the East Sea. In contrast, in the interior of the East Sea, radiocarbon values have increased with time in all three basins. In the Central Water, the annual increase rate was about 3.3‰, which is faster than the rates in the Deep and Bottom Waters. The radiocarbon in the Deep and Bottom Waters had increased until mid-1990s, after which time it has been almost constant.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.521-526
• /
• 2006

A membrane bioreactor (MBR) is an effective tool for wastewater treatment with recycling. MBR process has several advantages over conventional activated sludge process (ASP); reliability, compactness, and quality of treated water. The resulting high-quality and disinfected effluents suggest that MBR process can be suitable for the reused and recycling of wastewater. An anoxic/oxic (A/O) type MBR was applied to simultaneous removal of organics and nutrients in sewage. At first, the efficiency of submerged MBR process was investigated using a hollow fiber microfiltration membrane with a constant flux of $10.2L/m^2{\cdot}h$ at each solids retention time (SRT). Results showed that protein/carbohydrate (P/C) ratio increased and total extracellular polymeric substances (EPS) remained constant with SRT increased. Secondly, A/O type MBR with a reverse osmosis (RO) membrane was employed to treat the municipal wastewater. The performance of A/O type MBR-RO process is better for the treatment of organics and nutrients than ASP-MF-RO process in terms of consistent effluents quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1320-1325
• /
• 2007

Retarding retrogradation of a Korean rice cake (Karedduk) added with carbohydrate materials after $0{\sim}30hrs$ of storage at $5^{\circ}C$ were investigated by Avrami equation using textural characteristics. Carbohydrate materials such as powdered sugar, trehalose, fructooligosaccharide (95%), isomalto, healtholigo, and galactooligo-saccharide (50%) were added in 0, 1, 5 or 10% levels on dry rice flour. In the amylogram, the breakdown (P-H) and consistency (C-H) for Karedduk added with carbohydrate materials were lower than those of the control. Decrease in the Avrami exponent (n) and increase in the time constant (1/k) of Karedduuk added with carbohydrate materials during storage determined by Avrami equation were important comparison factors to the control in terms of retrogradation rate analysis. The Aurami exponent (n) for control, fructooligosaccharide (95%) 10% and healtholigo 1% addition were 2.415, 1.977 and 3.297, respectively. The time constant (1/k) for fructooligosaccharide (95%) 5% and healtholigo 1% addition were lower than thecontrol. Lastly, Karedduk added with carbohydrate materials, except for fructooligosaccharide (95%) 5% and healtholigo 1% addition, was effective in retarding retrogradation.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.729-741
• /
• 2012

Among the methods of precipitation data acquisition, a rain gauge station has a distinctive advantage of direct measurement of rainfall itself, but multiple stations should be installed in order to obtain areal precipitation data required for hydrological analysis. On the other hand, a rainfall radar may provide areal distribution of rainfall in real time though it is an indirect measurement of radar echoes on rain drops. Rainfall radars have been shown useful especially for forecasting short-term localized torrential storms that may cause catastrophic flash floods. CAPPI (Constant Altitude Plan Position Indicator), which is one of the several types of radar rainfall image data, has been provided on the Internet in real time by Korea Meteorological Administration (KMA). It is one of the most widely available rainfall data in Korea with fairly high level of confidence as it is produced with bias adjustment and quality control procedures by KMA. The objective of this study is to develop an improved way to extract quantitative rainfall data applicable to even very small watersheds from CAPPI using CIVCOM, which is a new image processing method based on a vector-based scheme proposed in this study rather than raster-based schemes proposed by other researchers. This study shows usefulness of CIVCOM through comparison of rainfall data produced by image processing methods including traditional raster-based schemes and a newly proposed vector-based one.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.827-833
• /
• 2019

There are several factors to consider for a ship to enter or depart a port safely. It is particularly important to identify the tides in the port to reduce the risk of stranding the ship. Most previous studies have focused on finding and analyzing harmonic constants. However, the research on the analysis and accuracy of harmonic constants in other hydrographic agencies is lacking. In this study, six Korean ports (Incheon, Gunsan, Yeosu, Busan, Ulsan, and Sokcho) were compared to the British and Korean tide tables based on actual information. To find the cause of tidal difference, the tide height, tide time, and form factor were calculated using harmonic constants. The information was then compared with British and Korean data. As a result of the difference in analysis of actual information and tide tables, there was a difference between the actual tide height and time at each port. The cause was found to be the difference in the harmonic constant, tide, and form factor between the UK and Korea. Therefore, this study, the Korean standard port should be added to the British tide table, and harmonic constants, which are the criteria for creating tides, must be constantly updated with the latest information. Additionally, the tide tables produced in each country are more accurate than the tide tables produced in UK.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.431-438
• /
• 2012

The developmental time of the nymphs of Myzus persicae was studied in the laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a green-pepper plastic house. Mortality of M. persicae in laboratory was high in the first(6.7~13.3%) and second instar nymphs(6.7%) at low temperatures and high in the third (17.8%) and fourth instar nymphs(17.8%) at high temperatures. Mortality was 66.7% at $33^{\circ}C$ in laboratory and $26.7^{\circ}C$ in plastic house. The total developmental time was the longest at $14.6^{\circ}C$ (14.4 days) and shortest at $26.7^{\circ}C$ (6.0 days) in plastic house. The lower threshold temperature of the total nymphal stage was $3.0^{\circ}C$ in laboratory. The thermal constant required for nymphal stage was 111.1DD. The relationship between developmental rate and temperature was fitted nonlinear model by Logan-6 which has the lowest value on Akaike information criterion (AIC) and Bayesian information criterion (BIC). The distribution of completion of each developmental stage was well described by the 3-parameter Weibull function ($r^2=0.95{\sim}0.97$). This model accurately described the predicted and observed occurrences. Thus the model is considered to be good for use in predicting the optimal spray time for Myzus persicae.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.421-429
• /
• 2012

The developmental time period of Aphis gossypii was studied in laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a cucumber plastic house. The mortality of A. gossypii in the laboratory was high in the 2nd (20.0%) and 3rd stage(13.3%) at low temperature but high in the 3rd (26.7%) and 4th stage (33.3%) at high temperatures. Mortality in the plastic house was high in the 1st and 2nd stage but there was no mortality in the 4th stage at low temperature. The total developmental period was longest at $15^{\circ}C$ (12.2 days) in the laboratory and shortest at $28.5^{\circ}C$ (4.09 days) in the plastic house. The lower threshold temperature at the total nymphal stage was $6.8^{\circ}C$ in laboratory. The thermal constant required to reach the total nymphal stage was 111.1DD. The relationship between the developmental rate and temperature fit the nonlinear model of Logan-6 which has the lowest value for the Akaike information criterion(AIC) and Bayesian information criterion(BIC). The distribution of completion of each development stage was well described by the 3-parameter Weibull function ($r^2=0.89{\sim}0.96$). This model accurately described the predicted and observed outcomes. Thus it is considered that the model can be used for predicting the optimal spray time for Aphis gossypii.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.1
• /
• pp.42-48
• /
• 2006

Open reduction and rigid internal fixation is the most popular treatment method for maxillofacial fracture patients, and it is unevitable that postoperative pain can be developed. Many surgeons including oral & maxillofacial surgeons have made constant efforts to decrease postoperative pain. This study is a comparison of postoperative analgesia and intramuscular analgesia in patients with mandibular fractures. In this study, twenty-one patients (Experimental group) were randomly selected and they were injected with IV patient-controlled analgesia (PCA; Walkmed$^{(R)}$, USA). For control group another twenty-one patients were injected with intramusclar non-steroid anti-inflammatory drugs (Rheoma$^{(R)}$, Samsung Pharm. Co.). And then, we measured visual analogue scale (VAS) scores from first postoperative day to second day at regular time interval. The following results were uptained; 1. In patient group who with open reduction and rigid internal fixation, there was significant difference of postoperative analgesic effect during the first postoperative day(p<0.05). 2. In patient group with over 90 minutes surgery time, there was significant difference of postoperative analgesic effect during the first and second postoperative day when compared between experimental group and control group(p<0.05). 3. In patient group with less than 90 minutes surgery time, there was no significant difference of postoperative analgesic effect during the first and second postoperative day when compared between experimental group and control group(p>0.05). 4. In patient group with surgery of open reduction using rigid internal fixation at single fractured site, there was no significant difference of postoperative analgesic effect during the first and second postoperative day when compared between experimental group and control group(p>0.05). 5. In patient group with surgery at two fractured sites, there was significant difference of postoperative analgesic effect during the first postoperative day when compared between experimental group and control group(p<0.05). As mentioned above, it suggest that patient-controlled analgesia is more effective for postoperative pain relief than intramuscular injection in patients with rigid internal fixation by open reduction after mandibular fracture occurred. Especially, it is considered that in patient with more than 90 minutes surgery time or in cases with multiple fractured sites had more effective results with PCA therapy than conventional intramuscular analgesics.

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.149-165
• /
• 1993

Nowadays, the field hydraulic test is still an only method to evaluate groundwater characteristics in subsurface. The results of hydraulic test are very important for the concept model of fracture hydrogeology as well as the geometric pattern of fractures. The hydraulic tests performed in Korea are generally analysed under such assumption as steady radial flow in homogeneous aquifer or along simple geometry of fractures. Also the transmissivity measured in a fixed interval length is equivalent to a sum of individual fracture transmissivities in test legth. The boundary effects of weH hydraulics and the geometry of flow paths are hardly obtained from the test results analysed by a steady flow method. To circumvent this problem, the flow dimensional analysis was attempted from the results of constant pressure injection test carried out in a fractured granite area. A comparison of the hydraulic conductivity values from the transient and steady analysis shows that the latter is about a factor of 2~3 higher than the former. However, it was possible to analyse a flow dimension of each test interval from flow rate variation with time. The upper part of the bedrock(<10m deep) indicates an open boundary and the flow dimension shows nearly steady states, while the lower part of the bedrock(>25m deep) is characterized as sublinear flow dimension with a dosed boundary. In one of the test sections(15m deep), the flow dimension was changed from linear flow to spherical flow. From the experience of this study, one of the immediate problems to be solved is to enhance the field testing equipments, i.e., an accurate flowmeter with autorecording and a pressure detecting device to be able to install in the test section.