• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.906-914
• /
• 2020

천연물 유래 식물소재의 유용성 탐색의 일환으로 자생하는 실새삼을 열수로 추출하여 몇 가지 이화학적 추출특성과 기능성분 함량 및 생리활성을 측정하였다. 실새삼 중 납, 카드뮴 및 비소는 검출되지 않았으며, 수은은 0.0004ppm으로 허용 기준치 이내의 함량으로 검출되었고, 추출수율은 23.45%, gallic acid에 대응되는 총페놀함량과 naringin에 대응되는 총플라보노이드 함량은 각각 699.8과 373.8 mg/100g으로 측정되었다. 실새삼 추출물에서 28종의 유리 아미노산이 검출되었으며, 이 중 anserine과 sarcosine의 함량이 가장 높게 측정되었다. 실새삼 추출물과 ascorbic acid의 생리활성을 비교한 결과 추출물의 총환원력, 전자공여능 및 철환원력은 각각 ascorbic acid의 88%, 56% 및 40%의 크기에 해당하였다. pH 1.5에서 실새삼 추출물의 아질산염 소거능은 ascorbic acid의 78%의 활성을 보였으며, 들기름에 대한 항산화지수는 ascorbic acid의 약 5배에 해당하는 우수한 산화억제 효과를 보여 천연 항산화제로서의 가능성을 보였다.

• Geomechanics and Engineering
• /
• 제19권6호
• /
• pp.473-484
• /
• 2019

In this paper, the geotechnical report of the Northern Fereshteh area in Tabriz is used and the characteristics of shallow foundation of a single pile and compared pile group and geogrid in terms of the settlement of a building foundation on clayey soil. Additionally, impacts of existing variables such as the number of geogrid layers, the length of the pile, and the depth of groundwater level affected by the dynamic load caused by the Taiwan Jiji earthquake via numerical analysis using PLAXIS software are examined. The results of fifty-four models indicated that the construction of a pile group with a diameter of 1 meter and a length of 14 meters significantly diminished the consolidation settlement of the soil in the Northern Fereshteh area, where the settlement value has been triggered by the load inflicted by earthquake. Moreover, the construction of four layers of geogrid at intervals of one meter led to a significant decrease in the settlement. Finally, after reaching a maximum depth, it had no reducing effects on the foundation settlement.

• 한국식품저장유통학회지
• /
• 제18권6호
• /
• pp.884-890
• /
• 2011

본 연구에서는 국내 시판되는 비살균 막걸리 8종의 품질 특성을 조사하였다. 막걸리 5종의 알코올 함량은 5.7~5.8%, G $6.7{\pm}0.1%$, D $6.8{\pm}0.2%$, C $7.5{\pm}0.1%$로 각각 분석되었다. 적정산도는 막걸리 C와 D에서 0.5%이상, H에서는 $0.49{\pm}0.02%$로 높게 나타났으며, 나머지는 0.45% 이하로 나타났으며, pH는 시료 간에 큰 차이는 없었다. 환원당 함량은 약 200 mg%정도이며, A와 F는 약 90 mg%로 낮게 나타났다. 유기산 중 malic acid는 막걸리 A와 G에서만 검출되었으며, acetic acid는 C와 D에서 높게 나타났다. 유리당 중 fructose와 sucrose는 검출되지 않았으며, glucose 함량은 막걸리 G에서 $335.1{\pm}40.3$ mg%로 가장 높게 나타났다. Maltose 함량은 막걸리 E($73.5{\pm}1.8$ mg%)를 제외하고는 $23.5{\pm}1.0{\sim}45.0{\pm}1.1$ mg%로 비슷하게 나타났다. 알코올 성분으로는 1-propanol, 2-methyl-1-propanol 및iso-amylalcohol이 검출되었으며, 함량은 0.4~0.5 mg/mL로 탁주규격에 적합하였다. 이상과 같이 막걸리의 이화학적 특성을 비교하였으며 발효제, 담금조건, 담금유형별에 따른 품질분석에 관한 연구가 요구되었다.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.38-47
• /
• 2013

When building with concrete in cold weather, an insulation method of heat curing must be determined, and a holistic curing plan that considers the characteristics of structures, the heat loss coefficient of a curing sheet, the joint condition of the curing materials and the quantity of heat produced by a heating apparatus is an essential prerequisite for protection against early frost damage. But on a number of national construction sites, there have been serious problems in cold weather concreting due to the unreliability of the information obtained from practical experience. In the construction field in Japan, there is a specification for heat curing prepared by Japanese Architectural Society, which provides an equation for calculating heat quantity. It is also necessary to adopt a detailed specification for a standard heat curing method that is applicable to all national construction sites. In this study, the effect of bubble sheets on the economic feasibility of cold weather concrete is investigated through a comparison with the blue sheets commonly prescribed in national construction sites. In conclusion, this study found that bubble sheets had the effect of reducing the cost of curing materials and the fuel cost consumed by a heating apparatus, compared to the use of blue sheets.

• 대한치과의사협회지
• /
• 제47권7호
• /
• pp.435-443
• /
• 2009

The purpose of this study was to compare the centering ratio and reduction of canal curvature according to the preparation sizes of #30, #40 and #50 using three rotary NiTi instruments which have different shaft tapers. Seventy-two simulated root canals in clear resin blocks (Endo Training Bloc; Dentsply Maillefer, Ballaigues, Switzerland) were divided as following 3 groups according to the file system; the 24 canal blocks prepared with each of ProTaper Universal system (Group P), LightSpeed eXtra system (Group L), and K3 (Group K). The pre- and post-instrumented root canals were scanned and superimposed to evaluate and calculate the centering ratio and reduction of canal curvature. Mean scores of each group were statistically analyzed using one-way ANOV A and Duncan's multiple range test for post-hoc comparison. The results were as followings: 1. Group L showed better centering ratio, followed by K and P. And all experimental groups generally showed increasing tendency of centering ratio as the apical size was increasing from #30 to #50, except at 1 mm level of group P where showed reducing tendency of centering ratio. The smaller the ratio, the better the instrument remained centered in the canal. 2. Group P showed more decrease of canal curvature at all apical shaping size (p < 0.05). Under the conditions of this study, the shaft design could affect the quality of canal shaping and the smooth taperless flexible (LightSpeed) shaft design was capable of preparing canals with good morphological characteristics in curved canals.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.224-236
• /
• 2013

This work presents a comparative study of four Double Gate tunnel FET (DG-TFET) architectures: conventional p-i-n DG-TFET, p-n-p-n DG-TFET, a gate dielectric engineered Heterogate (HG) p-i-n DG-TFET and a new device architecture with the merits of both Hetero Gate and p-n-p-n, i.e. HG p-n-p-n DG-TFET. It has been shown that, the problem of high gate capacitance along with low ON current for a p-i-n TFET, which severely hampers the circuit performance of TFET can be overcome by using a p-n-p-n TFET with a dielectric engineered Hetero-gate architecture (i.e. HG p-n-p-n). P-n-p-n architecture improves the ON current and the heterogeneous dielectric helps in reducing the gate capacitance and suppressing the ambipolar behavior. Moreover, the HG architecture does not degrade the output characteristics, unlike the gate drain underlap architecture, and effectively reduces the gate capacitance.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.257-257
• /
• 2015

Carbon Capture and Storage with ocean sequestration is being considered as one of the most effective option for reducing the $CO_2$ net flux from atmosphere nowadays. But it is still possible for $CO_2$ substance to leaks out from transport pipeline or from the under seabed storage sites and causing damage to ambient environment. The behavior of liquid $CO_2$ under droplet shape would be strongly affected by the presence of other contaminants such as $SO_2$ comes from processing processes. This presentation shows the behavior in the sea water of pure liquid $CO_2$ droplets as well as droplets that consist of $SO_2$ substances. The study uses computational fluid dynamic models in comparison with experimental data from other previous researchers. Droplet of liquid $CO_2$ is assumed to be released at several depths in deep ocean, with other environmental conditions are set up respectively. All calculations are conducted with many different ratio of contaminant $SO_2$ to provide fundamental data of those particles rising characteristics. The effect of contaminants on the behavior of $CO_2$ droplets would be clearly shown through the results of particle deformation, terminal rising velocity happen due to buoyancy force driving from the difference in density of $CO_2$ substance and ocean water around.

• Elastomers and Composites
• /
• 제56권3호
• /
• pp.164-171
• /
• 2021

Due to the problem of environmental pollution by plastics, it is necessary to decrease their consumption. In the case of PET bottles, it is essential to reduce the thickness of the bottle for the reduction of plastic used. For manufacturing PET bottles with reduced thickness, it is a prerequisite to design a preform with reduced thickness and study its molding capability. In this study, the injection molding capability was investigated after reducing the body thickness of the preform to 15% and 20%, respectively, for the two preform models currently in use. Injection molding analysis was performed on the existing models and on the models for reduced weight, under the molding conditions of the existing models. Using the computed results, temperature distribution, pressure distribution, deformation and clamping force were compared. Based on the analysis, the injection conditions of the preform model with less thickness were discussed.

• 근관절건강학회지
• /
• 제6권1호
• /
• pp.51-72
• /
• 1999

The purpose of this study is to compar self-reported fatigue and fatigue-regulating behaviors of rheumatoid arthritic patients and normal persons. This study collected the data from 75 rheumatoid arthritic patents visited the departments of internal medicine or orthopedics of four general hospitals T-city and K-city by means of direct interview and questionnaires. in this study also collected data from 75 normal persons who had not been exposed to any other disease in T-city and K-city by means of direct interviews anti questionnaires which were conducted by two trained nurses. This experiment was conducted from August 1, 1998 to October 15, 1998. This study used both MAP(Multi-Dimentional Assessment of Fatigue) developed by Belza(1995) to measure fatigue and the measurement developed by Kwon, Young-Eun to investigate fatigue regulating behaviors. The collected materials were analyzed by means of descriptive statistics, t-test, and the ANCOVA according to the SPSS PC+ program. The findings are as follows : 1. There was the statistically significant difference(t =5.07, p=.000), between rheumatoid arthritic patients(32.76 points) and normal persons(25.81 points) in t-test comparison by group about fatigue. A fatigue degree of rheumatoid arthritic patient group was high in five kinds of lower realms such as common fatigue degree, fatigue severity to be experienced, distress due to fatigue, daily fatigue degree, and fatigue timing at the last week by dimension. 2. There was the significant difference in the number of fatigue-regulating behaviors between rheumatoid of fatigue arthritic patients(9.37 times) and normal persons (8.15 times), but there wasn't any significant difference in the efficiency between rheumatoid arthritic patients(2.85 points) and normal persons (2.78 points) This research suggests two kinds of things as follows : 1. It is necessary to develop an educational program for improving efficiency of fatigue-regulating behaviors as well as some nursing arbitration measures for reducing fatigue of rheumatoid arthritic patients. 2. It is necessary for the future studies to continuously grasp characteristics of fatigue by gender variable by selecting more rheumatoid arthritic male patients.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권8호
• /
• pp.434-440
• /
• 2002

Switched Reluctance Motor (SRM) has been not commonly used because of the severe noise and vibration, although it has many advantages as solidity and economical efficiency. The origin of the acoustic noise and vibration in SRM's can be broadly classified into two types, mechanical and magnetic. Therefore this paper verifies the origin of vibration induced by radial magnetic forces from various experiments, and then studies the relationship between the output and vibration characteristics of SRM according to switch-on and off angles. Acceleration, torque and efficiency is measured by changing switching angles. From the comparison and analysis of the experimental results, a proper switching angle is presented for both satisfying electric performance and reducing vibration.