• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.54-56
• /
• 2005

Analysis of the voice and its corresponding studies are examined from the recording of the voice through microphone and various calculation processes of the signals by using computer. Voice analyser include data acquisition and analyzing program. Since oath program uses different voice signal processing algorithm, thorough understanding of the operation is essential. In this study, analysis result of patient voice were compared by using four different voice analysis programs such as MDVP, Praat, TF32, and the program developed in this study. Pitch, jitter and shimmer were selected as comparison analysis factors. As a result, pitch, jitter and shimmer showed different result since each program uses different pitch computation algorithm.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.721-722
• /
• 2008

This paper deals with comparison and analysis for rotor losses of permanent magnet synchronous generator using phase current harmonic analysis according to dc and ac load. On the basis of analytical field analysis, the rotor losses are analysed. Particularly, rated speed and ac load and the rated speed and dc load conditions are considered. This paper compared rotor losses considered dc load with rotor losses considered ac load. Although our analytical modes is low speed, the rotor losses must be considered by results.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.251-261
• /
• 2018

Self-centering concentrically braced frames (SCCBFs) are emerging as high performance seismically resistant braced framing system, due to the capacity of withstanding strong earthquake attacks and promptly recovering after events. To get a further insight into the seismic performance of SCCBFs, systematical evaluations are currently conducted from the perspective of modal contributions. In this paper, the modal pushover analysis (MPA) approach is utilized to obtain the realistic seismic demands by summarizing the contribution of each single vibration mode. The MPA-based results are compared with the exact results from nonlinear response history analysis. The adopted SCCBFs originate from existing buckling-restrained braced frames (BRBF), which are also analyzed for purpose of comparison. In the analysis of these comparable framing systems, interested performance indices that closely relate to the structural damage degree include the interstory drift ratio, floor acceleration, and absorbed hysteretic energy. The study shows that the MPA approach produces acceptable predictions in comparison to the exact results for SCCBFs. In addition, the high-modes effect on the seismic behavior increases with the building height, and is more evident in the SCCBFs than the BRBFs.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.359-360
• /
• 2017

This paper presents comparison of simulation and experiment in thermal analysis of 3-level PFC. Thermal analysis is necessary to optimize the power conversion system to get higher efficiency. Accordingly, analysis via simulation tools and analytic methods is performed to predict the power losses of converter. Consequently, thermal results of 3-level PFC experiment is compared with thermal analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.151-162
• /
• 1991

The purpose of this study was to examine the point at issue unfitness and unclassification in figures for clothing construction. Comparing measurements of 3 sold figures and physical body by Suck·Go method and 19 items were selected. These items were acquired by factor analysis and cluster analysis an measurements of 200 women in twenties. The results were as follows; 1. Comparison between measurement of figures and physical body; There was not so much difference among figures, but significant difference between figures and physical body. 2. Comparison between measurement of surface area of figures and physical body; There was similar to each figure, but significant difference between figures and physical body. Mostly, figures were bigger than physical body in front parts but smaller in back parts. 3. There were 8 items selected by factor analysis; That is bust girth, waist girth, hip girth, neck base girth, posterior waist length, bust point length, chest breadth and armscye girth. 4. There were 7 clusters selected by cluster analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.694-699
• /
• 2011

This paper compares the performance of lightning shielding analysis methods using the seven striking distance formulae in substation. For comparison, we evaluate the number of expected strikes and exposed area using WinIGS Software. Seven striking distance formulae are compared using the electrogeometric model analysis and the rolling sphere method. Based on the electrogeometric model analysis, the risk of shielding failure in either the whole substation or parts of it is determined. According to the simulation results, one can justify whether the substation satisfies the criterion of shielding design. In particular, according to the rolling sphere method, the exposed areas in substation determine the location of the additional shielding poles or shield wires. Therefore, the installation of the additional shielding poles and shield wires in substation was accepted by shield design at the phase conductors exposed in the larger area.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.65-74
• /
• 2019

In this paper, we describe a new swing analysis system. We design this system to provide various information about golf swings and to help to correct wrong swings. We visualize three-dimensional skeletal information obtained from Kinect through various views. Golfers can see their swing behavior through these views. This system can calculate the similarity between the two trajectories obtained from Kinect to determine the similarity of swing trajectories of different golfers. Input trajectories are resampled to have equal spacing and are performed scaling and translation for accurate trajectory comparison. We have verified the usefulness of the proposed system through various analyzes.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.3
• /
• pp.2155-2163
• /
• 2020

Background: Various treatments have been proposed for chronic low back pain (CLBP), but recent guidelines and reviews recommend regular physical exercise. However, some other studies have reported opposite results that sling exercise (SE) and other exercises (OE) did not differ in improving CLBP. Objectives: To systematically review and meta-analyze the effects of SE on CLBP in studies published in Korea. Design: A Systemic Review and Meta-analysis. Methods: Randomized controlled trials comparing SE with OE and modality therapy (MT), published up to June 2020, were identified by electronic searches. Primary outcomes were pain and disability. The weighted mean difference (WMD), stand mean difference (SMD) and 95% confidence interval (CI) were calculated using a random-effects model. Results: Based on the results of the meta-analysis, SE was effective for pain in the comparison of SE and MT [short-term: WMD=-1.64, 95% CI (-3.06, -0.22); long-term: WMD=-0.34, 95% CI (-0.42, -0.26)]. It was effective for pain in the comparison of SE and OE [short-term: WMD=-1.18, 95% CI (-2.15, -0.20); long-term: WMD=-0.66, 95% CI (-0.89, -0.43)]. It was also effective for disability in the comparison of SE and MT [short-term: SMD=-15.82, 95% CI (-23.10, -8.54)]. We found no clinically relevant differences in disability between SE and OE. Heterogeneity was high in the comparison of SE and overall variables. Conclusion: If SE is applied to physical therapy to improve the main symptoms of CLBP patients, it may contribute to their recovery. More high-quality randomized studies on the topic are warranted.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.339-345
• /
• 2021

In this paper, estimation angle performance analysis of amplitude-comparison monopulse radar under additive noise effect is dealt with. When uncorrelated white noises are added to the squinted beams, the angle estimation performance is analyzed through the mean square error(MSE). The numerical integration-based mean square error result completely overlaps the Monte Carlo-based mean square error result, which corresponds to 99.8% of the Monte Carlo-based mean square error result. In addition, the mean square error analysis method based on numerical integration has a much faster operation time than the mean square error method based on Monte Carlo. the angle estimation performance of the amplitude comparison monopulse radar can be efficiently analyzed in various noise environments through the proposed numerical integration-based mean square error method.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.4
• /
• pp.319-332
• /
• 2013

The purpose of this study was to investigate the design comparison of totally prefabricated bridge substructure system. Prefabricated bridge substructure systems are a relatively new and versatile alternative in substructure design that can offer numerous benefits. The system can reduce the work load at a construction site and can result in shorter construction periods. The prefabricated bridge substructures are designed by the methods of Korea Highway Bridge Code (KHBD) and load and resistance factor design (AASHTO-LRFD). For the design, the KHBD with DB-24 and DL-24 live loads is used. This study evaluates the design method of KHBD (2005) and AASHTO-LRFD (2007) for totally prefabricated bridge substructure systems. The computer program, reinforced concrete analysis in higher evaluation system technology was used for the analysis of reinforced concrete structures. A bonded tendon element is used based on the finite element method, and can represent the interaction between the tendon and concrete of a prestressed concrete member. A joint element is used in order to predict the inelastic behaviors of segmental joints. This study documents the design comparison of totally prefabricated bridge substructure and presents conclusions and design recommendations based on the analytical findings.