• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.333-338
• /
• 1990

Most verification of improvements for adaptive control schemes are. dependent on computer simulations, but these computer simulations have much limitation, because (if complex actual conditions of system. This paper is concerned with the constructions of a thermal process system for experiments with various control schemes. This thermal process system is composed of a water tank, PC-XT, AD/DA converters power supply and thermal sensors. We estimate. the algorithms of pole-assignment adaptive control in the manifold disturbances and environments, changing system dynamics. The system equations for thermal press are included.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.165-177
• /
• 2012

PURPOSES: The number of traffic accidents in 2010 was 226,978 in Korea, a high percentage of which up to 12.61% was due to drunk driving. As it is expected that the number of traffic accidents will increase because of the drastic increase of the number of vehicle registrations and the prevalent drinking cultures, it is necessary to understand the driving characteristics of drunken drivers to lower the increasing rate. METHODS: This study, therefore, comparatively analyzes the two groups - one group before drinking and the other after drinking - based on the graph, and implements the correlation in each scenario(1,2,3). scenario 1. appearance of jaywalkers; scenario 2. appearance of an illegal left-turning car; and scenario 3. appearance of a vehicle and a person as obstacles to the driver after an accident. RESULTS: The comparative analysis of speed shows that the group after drinking was 50km/h faster than the group before drinking in Scenario 1, 20km/h in Scenario 2, and 15km/h in Scenario 3 respectively. In the comparative analysis of acceleration, the average level of the group after drinking was 0.15 higher than that of the group before drinking in Scenario 1, 0.30 in Scenario 2, and 0.15 in Scenario 3. In the comparative analysis of deceleration, the average level of the group after drinking was about 0.4 lower than that of the group before drinking in Scenario 1, 0.35 in Scenario 2, and 0.2 in Scenario 3 respectively. In the comparative analyses, the item of speed, acceleration and deceleration was of significance for each group in Scenarios. CONCLUSIONS: The comparative analysis demonstrated that there is a difference between the group before drinking and the group after drinking. In the analysis of correlation in each group, it was proved that the drunken group was of significance.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.9
• /
• pp.289-304
• /
• 2022

It is necessary to apply process algebra and logic in order to analyze and verify safety requirements for Smart IoT Systems due to distributivity and mobility of the systems over some predefined geo-temporal space. However the analysis and verification cannot be fully intuitive over the space due to the fact that the existing process algebra and logic are very limited to express the distributivity and the mobility. In order to overcome the limitations, the paper presents a new logic, namely for GTS-VL (Geo-Temporal Space-Visual Logic), visualization of the analysis and verification over the space. GTS-VL is the first order logic that deals with relations among the different types of blocks over the space, which is the graph that visualizes the system behaviors specified with the existing dTP-Calculus. A tool, called SAVE, was developed over the ADOxx Meta-Modeling Platform in order to demonstrate the feasibility of the approach, and the advantages and practicality of the approach was shown with the comparative analysis of PBC (Producer-Buffer-Consumer) example between the graphical analysis and verification method over the textual method with SAVE tool.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.127-137
• /
• 1999

In the previous study in relation to the current study, a test program for the verification of the proposed design equation was carried with fourteen prestressed concrete beams with unbonded tendons. Experimental results were compared with the computed results by the proposed design equations. The previous design equations are ACI code, AASHTO LRFD code, the analysis equation with the strain compatibility, Harajli/Kanj' design equation, Chakrabarti' design equation. As a result of comparative studies, it turned out that the proposed design equation could predict the ultimate tendon stress with comparatively high accuracy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2420-2433
• /
• 2014

Fusing the scores of multibiometrics is a very promising approach to improve the overall system's accuracy and the verification performance. In recent years, there are several approaches towards studying score level fusion of several biometric systems. However, most of them does not consider the genuine and imposter score distributions and result in a higher equal error rate usually. In this paper, a novel score level fusion approach of different biometric systems (dual iris, thermal and visible face traits) based on $Acz{\acute{e}}l$-Alsina triangular norm is proposed. It achieves higher identification performance as well as acquires a closer genuine distance and larger imposter distance. The experimental tests are conducted on a virtual multibiometrics database, which merges the challenging CASIA-Iris-Thousand database with noisy samples and the NVIE face database with visible and thermal face images. The rigorous results suggest that significant performance improvement can be achieved after the implementation of multibiometrics. The comparative experiments also ascertain that the proposed fusion approach outperforms the state-of-art verification performance.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.495-512
• /
• 2008

Because Korea and Japan has joined WTO and OECD, it is impossible to carry out a direct export-promoted policy such as export subsidies. Therefore, the only policy which is internationally valid for promoting an export is the export insurance. Hence export insurance system became more useful tool since it's one of the few allowed subsidies under WTO. This paper examines to find the impacts of export insurance on the export supply in Korea and Japan. The period of data is from 1980 to 2006. Unlike previous studies on the effectiveness of export subsidy in export supply, the current study examines the stationarity nature of the concerned variables. The unit root tests show that all variables are not I(0) Time Series. Instead, they are I(1) Time Series. To this, cointegration verification was conducted based on the use of Johansen verification method to define the existence (or non-existence) of long-term balance relationship among variables. The concerned variables are revealed to be cointegrated. In order to analyze, this study introduce a VEC model. In this paper we construct two VEC models. The one is about Korea, the other is about Japan. The empirical evidences show that export insurance system has not contributed to promoting export supply in Japan. But the results of empirical analysis showed significant and positive effects of Korea export insurance upon the export supply.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.83-90
• /
• 2018

This paper introduces a innovative diamond wire saw cutting technology and its experimental verification that can be utilized for cutting heavy structures. While conventional diamond wire saw cutting technologies such as water cooled cutting method and dry cutting method cause severe environmental problems due to generating massive concrete sludge or dust scattering, the proposed method can eliminate those problems considerably. Through extensive experiments using heavy structure test bed and real bridge pier structure, comprehensive analysis and comparative evaluation about various cutting methods were performed. As a result, the innovative diamond wire saw cutting method could achieve a similar cutting and cooling performance to the water cooled cutting method without generating concrete sludge and it showed an improved cutting and cooling performance to the dry cutting method without dust scattering. Consequently it is confirmed that the suggested cutting technology can be a promising environment-friendly alternative in the field of heavy structure dismantling.

• Journal of Environmental Health Sciences
• /
• v.47 no.1
• /
• pp.64-77
• /
• 2021

Objective: Biological monitoring of trace elements in human blood samples has become an important indicator of the health environment. The purpose of this study was to detect and evaluate multiple metal items in blood samples based on ICP-MS, to perform comparative evaluation with the existing analysis method, and to develop and verify a new method. Methods: 100 μL of whole blood from 80 healthy subjects was used to analyze ten metals (Sb, tAs, Cd, Pb, Mn, Hg, Mo, Ni, Se, Tl) using ICP-MS. Verification of the analysis method included calculation of linearity, accuracy, precision and detection limits. In addition, a comparative test with the conventional graphite furnace atomic absorption spectroscopy (GF-AAS) method was performed. In the case of Pb, Cd, and Hg in whole blood, cross-analysis between Pb, Cd, and Hg analysis methods was performed to confirm the difference between the existing method and the new method (ICP-MS). Results: The coefficient of determination (R2) was 0.999 or higher in seven items and 0.995 or higher in three items. The Pb result showed that Pearson's correlation coefficient was very high at 0.983, and the intraclass correlation coefficient was 0.966. The Cd result showed that Pearson's correlation coefficient was 0.917 between the existing method and the new analysis concentration value. Its intraclass correlation coefficient was 0.960, and there was no significant difference between the two groups. Hg had a low correlation at 0.687, and the intraclass correlation coefficient was 0.761, which was lower than that of Pb and Cd. The intra-day and inter-day accuracy of Pd and Cd were satisfactory, but Hg did not meet the criteria for both accuracy and precision when compared with the conventional analysis method. Conclusion: This study can be meaningful in that it proposes a more efficient and feasible analysis method by verifying a blood heavy metal concentration experiment using multiple simultaneous analyses. All samples were processed and analyzed using the new ICP-MS. It was confirmed that the agreement between the two methods was very high, with the agreement between the current and new methods being 0.769 to 0.998. This study proposes an efficient simultaneous methodology capable of analyzing multiple elements with small samples. In the future, studies of various applications and the reliability of ICP-MS analysis methods are required, and research on the verification of accurate, precise, and continuous analysis methods is required.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.111-121
• /
• 2017

Verification of dose distribution is an essential part of ensuring the treatment planning system's (TPS) calculated dose will achieve the desired outcome in radiation therapy. Each measurement have uncertainty associated with it. It is desirable to reduce the measurement uncertainty. A best approach is to reduce the uncertainty associated with each step of the process to keep the total uncertainty under acceptable limits. Point dose patient specific quality assurance (QA) is recommended by American Association of Medical Physicists (AAPM) and European Society for Radiotherapy and Oncology (ESTRO) for all the complex radiation therapy treatment techniques. Relative and absolute point dose measurement methods are used to verify the TPS computed dose. Relative and absolute point dose measurement techniques have a number of steps to measure the point dose which includes chamber cross calibration, electrometer reading, chamber calibration coefficient, beam quality correction factor, reference conditions, influences quantities, machine stability, nominal calibration factor (for relative method) and absolute dose calibration of machine. Keeping these parameters in mind, the estimated relative percentage uncertainty associated with the absolute point dose measurement is 2.1% (k=1). On the other hand, the relative percentage uncertainty associated with the relative point dose verification method is estimated to 1.0% (k=1). To compare both point dose measurement methods, 13 head and neck (H&N) IMRT patients were selected. A point dose for each patient was measured with both methods. The average percentage difference between TPS computed dose and measured absolute relative point dose was 1.4% and 1% respectively. The results of this comparative study show that while choosing the relative or absolute point dose measurement technique, both techniques can produce similar results for H&N IMRT treatment plans. There is no statistically significant difference between both point dose verification methods based upon the t-test for comparing two means.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.508-516
• /
• 2017

The M&S (Model and Simulation) has been increasingly used in the wide area of applications and the official certification or accreditation of the M&S are becoming a mandatory requirement to prevent the risks and mishaps caused by the usage of inadequate M&Ss or by misuses of the M&S. This paper threats the VV&A (Verification, Validation, and Accreditation) for the M&S used in the development of the aerospace systems, where most M&S used in the development are derived from the physical laws and the final validation data are typically obtained through a series of flight tests after the prototype production. Considering these unique features, the paper proposes the M&S life-cycle model and development paradigm suitable for the aerospace-system development and accesses the proposed ones by comparative investigation on the relevant regulations and related literatures.