• Journal of Periodontal and Implant Science
• /
• v.48 no.5
• /
• pp.326-333
• /
• 2018

Purpose: The present study investigated the outcomes of a newly-developed, simple, and practical nonsurgical treatment modality suitable for most forms of intrabony defects around failing dental implants using intrasulcular delivery of chlorhexidine solution and minocycline hydrochloride (HCl). Methods: Forty-five dental implants in 20 patients diagnosed with peri-implantitis were included. At baseline and the study endpoint, the probing pocket depth (PPD), clinical attachment level (CAL), and the presence of bleeding on probing (BOP) at 6 sites around each implant were recorded. The radiographic osseous defect morphology at the mesial or distal proximal aspect of each implant was classified as 1) narrow or wide and 2) shallow or deep. For a comparative analysis of bone changes according to the defect morphology, the distance from the implant shoulder to the most coronal bone-to-implant contact point (DIB) at the mesial and distal aspects of each implant was measured at baseline and the endpoint. Patients were scheduled to visit the clinic every 2-4 weeks for intrasulcular irrigation of chlorhexidine and delivery of minocycline HCl. Results: We observed statistically significant decreases in PPD, CAL, and BOP after treatment. At the endpoint, bone levels increased in all defects, regardless of the osseous morphology of the intrabony defect. The mean DIB change in deep defects was significantly greater than that in shallow defects. Although the mean bone gain in narrow defects was greater than in wide defects, the difference was not statistically significant. Conclusions: We propose that significant and sustainable improvements in both clinical and radiographic parameters can be expected when intrabony defects around dental implants are managed through a simple nonsurgical approach involving combined intrasulcular chlorhexidine irrigation and local delivery of minocycline HCl.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.103-114
• /
• 1993

The purpose of this study was to determine whether any difference existed in craniofacial morphology between parents of children with cleft lip and/or palate and parents of children without cleft lip and/or palate as well as the characteristics of craniofacial morphology in parents of children with cleft lip and/or palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in parents of 28 children with cleft lip and palate, 18 children with cleft lip, and 22 children with cleft palate. There were 28 couples and 40 single parents in this sample. There were 92 individuals including 41 males and 51 females. The measurements were compared with those in control subjects, including 40 adult males and 40 adult females, who had no history of craniofacial abnormalities. The total sample was compared for the sex independently. The obtained results were as follows. 1. In the cranium, both parents of cleft children had significantly shorter posterior cranial base length(S-Ba). 2. In the upper face, a significantly shorter anteroposterior length of maxilla(A'-Ptm'), particularly in the anterior region (A'-K), anterior facial depth(A-SBaL), posterior facia! height(Ptm'-SNL) and relation of subnasale to the cranial base (∠BaN'Sn) were noted in fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers. 3. In the lower face, both parents of cleft children showed a significantly greater Y axis angle(∠NSGn) and ramal plane angle(∠SNL-RP) in fathers of cleft children. Thus both patents showed a posteriorly rotation of mandible. The thickness of the lower lip(B-B') was significantly thicker in fathers of cleft children. 4. In the facial profile, a significantly shorter posterior facial height(S-Go) and greater angle of soft tissue facial convexity (∠BaN'Pog') were noted in the fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers.

• Korean Journal of Materials Research
• /
• v.23 no.2
• /
• pp.89-97
• /
• 2013

The study of grinding behavior characteristics on aluminum powders and carbon nano tubes (CNTs) has recently gained scientific interest due to their useful effect in enhancing advanced nano materials and components, which significantly improves the property of new mechatronics integrated materials and components. We performed a series of dry grinding experiments using a planetary ball mill to systematically investigate the grinding behavior during Al/CNTs nano composite fabrication. This study focused on a comparative study of the various experimental conditions at several variations of rotation speeds, grinding time and with and without CNTs. The results were monitored for the particle size distribution, median diameter, crystal structure from XRD pattern and particle morphology at a given grinding time. It was observed that pure aluminum powders agglomerated with low rotation speed and completely enhanced powder agglomeration. However, Al/CNTs composites were achieved at maximum experiment conditions (350 rpm, 60 min.) of this study by a mechanical alloy process for Al/CNTs mixed powders because the grinding behavior of Al/CNTs composite powder was affected by addition of CNTs. Indeed, the powder morphology and crystal size of the composite powders changed more by an increase of grinding time and rotation speed.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.375-379
• /
• 2014

Nanocrystalline TiAlN coatings were prepared by reactively sputtering TiAl metal target with $N_2$ gas. This was done using a magnetron sputtering system operated in DC and ICP (inductively coupled plasma) conditions at various power levels. The effect of ICP power (from 0 to 300 W) on the coating microstructure, corrosion and mechanical properties were systematically investigated using FE-SEM, AFM and nanoindentation. The results show that ICP power has a significant influence on coating microstructure and mechanical properties of TiAlN coatings. With increasing ICP power, the coating microstructure evolved from the columnar structure typical of DC sputtering processes to a highly dense one. Average grain size of TiAlN coatings decreased from 15.6 to 5.9 nm with increasing ICP power. The maximum nano-hardness (67.9 GPa) was obtained for the coatings deposited at 300 W of ICP power. The smoothest surface morphology (Ra roughness 5.1 nm) was obtained for the TiAlN coating sputtered at 300 W ICP power.

• The Korea Journal of Herbology
• /
• v.25 no.3
• /
• pp.61-64
• /
• 2010

Objctive：To clarify the criterion, the characteristic of varaious age of ginseng radix cultivated in Korea and China were studied. Method：The surface of the transverse section of the specimen was made into a slid by the Paraffin Section method, and then dyed by Safranine Malachite Green method. The samples were observed at the power of 400 by an optic microscope(Olympus, Japan). The component and flavor of ginseng radix were analyzed by TLC(Thinlayer Chromatography) and electronic nose(FOX3000, France). Result：Ginseng radix according to the growing district and various age were comparative analyzed by optic microscope, TLC and electronic nose. The results were as followings. 1. The external form of Korean ginseng is longer and brightness then Chinese ginseng. 2. The internal form of Korean and Chinese ginseng are similar to each other. 3. The component of Korean and Chinese ginseng in TLC are similar to each other. 4. The fragrance of Korean and Chinese ginseng are clearly different. Conclusion：The results in this study demonstrate that morphology and component of Korean ginseng are similar to Chinese, on the other hand, fragrance of Korean and Chinese ginseng are different.

• Journal of Veterinary Science
• /
• v.21 no.6
• /
• pp.83.1-83.14
• /
• 2020

Background: Bovine and porcine teeth are often used in in vitro experiments as substitutes of human teeth. Objectives: The aim of the present study was to perform a comparative analysis of enamel morphology of permanent human, bovine and porcine teeth under the scanning electron microscope. Methods: As many as 10 human, 10 bovine, and 10 porcine teeth were studied. All the teeth were sectioned and the halves were randomly divided into 2 groups according to the examined tissue (vestibular enamel at the mid-height of the dental crown and in the cervical area). Human and bovine enamel was etched for 15 sec and porcine enamel for 30 sec. The scanning electron microscope analysis was performed. The length and width of enamel prisms were determined with the "Met-Ilo" 1.1 computer program. Results: All enamel samples revealed the same etching pattern-Silverstone's type 2. Bovine enamel showed a similar porosity and the amount of interprismatic enamel compared to human enamel while the amount and width of interprismatic enamel bands in porcine enamel were evidently greater. The shape of the porcine prisms was visually similar to human prisms, although dimensions were significantly different. However, bovine prisms differed in form and appeared to be distinctly elongated. Conclusions: Reported findings indicate that the results of experimental studies carried out on bovine and porcine enamel should not be compared with the results obtained on human enamel.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.218-223
• /
• 2007

The hybrid $C/TiO_2$ complexes were prepared by a method involving the penetration of titanium n-butoxide (TNB) solution with porous carbons. The photocatalysts were investigated for their surface textural properties and SEM morphology, structural crystallinity and elemental identification between porous carbon and $TiO_2$, and dye decomposition performance. For all the $C/TiO_2$ complexes prepared by TNB solution methods, the excellent photocatalytic effect for dye degradation should be attributed to the synergitic effects between photo-decomposition of the supported $TiO_2$ and adsorptivity of the porous carbons.

• Korean Journal of Pharmacognosy
• /
• v.27 no.4
• /
• pp.316-322
• /
• 1996

Three medicinal species of the genus Polygala were examined by comparative morphology, anatomy and TLC analysis. They were classified into three species, and distinctly divided into two groups in this study. Group I is composed of P. japonica, P. sibirica and Group II P. tenuifolia. Considered on the relationships between two groups by the differences of leaf shape, adnated part of petal, flower colour, fruit shape etc., Group II may have been independently evolved from the common ancestor by having one raw of palisadelike chlorenchyma under the stem epidermis through the different pathway. It is also suggested that the taxa of Group II appear to be more advanced than those of Group I.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.6
• /
• pp.408-414
• /
• 2002

TiN and TiAlN coating layer were deposited on WC-Co steel substrates by an arc ion plating(AIP) technique. The crystallinity and morphology for the deposited coating layers were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The impact behaviors of the deposited TiN and TiAlN coating layer were investigated with a ball-on-plate impact tester. Beyond $10^2$ impact cycle, TiAlN coating layer showed superior impact wear resistance compared to TiN coating layer. On the other hand, both TiN and TiAlN coating layers started to be partially failed between $10^2$ and $10^3$ impact cycle. Above $10^3$ impact cycle, TiN and TiAlN coating layers showed similar impact behavior because of the substrate effect.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.45-53
• /
• 2012

In order to make a supermicrofiber fabric with PET/co-PET sea-island type filament fiber, the optimum conditions of dissolution of co-PET composite filament fiber was examined. The data set was made at various organic acid concentration and steam temperature with treated time as a main variable. At the same time, the microstructure changes by organic acid treatment of sea-island type PET supermicrofibers were monitored by thermal analysis morphology, DSC thermgrams and SEM images. Weight reduction behavior of supermicrofibers by caustic treatment was investigated in a comparative method. The termination of dissolution was also confirmed using DSC thermgrams and SEM images.