• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1311-1316
• /
• 2014

To be used in a transmitter of a satellite transponder of this paper, X band 25W power amplifier module, a part constituting of high-power amplifier is transmitted to the equipment for transmitting to geostationary communications satellites(36,000Km distance). PAM consisted a total of four power amplifier module has a high output characteristic of the high-output amplifier is used in the ground station. Used in conjunction with the structured type power amplifier module is composed of Serial Combining Structure. This PAM(Power Amplifier Module) configured by combining the circuit with the power amplifier, 10 MMIC chips and the Al2O3 thin film substrate using a Hybrid Technique of power amplifier module, was implemented at X band PAM(Power Amplifier Module) of 25W grade.

• Structural Engineering and Mechanics
• /
• v.69 no.4
• /
• pp.407-416
• /
• 2019

This paper develops a wireless sensor for online fatigue crack detection and failure warning based on crack-induced nonlinear ultrasonic modulation. The wireless sensor consists of packaged piezoelectric (PZT) module, an excitation/sensing module, a data acquisition/processing module, a wireless communication module, and a power supply module. The packaged PZT and the excitation/sensing module generate ultrasonic waves on a structure and capture the response. Based on nonlinear ultrasonic modulation created by a crack, the data acquisition/processing module periodically performs fatigue crack diagnosis and provides failure warning if a component failure is imminent. The outcomes are transmitted to a base through the wireless communication module where two-levels duty cycling media access control (MAC) is implemented. The uniqueness of the paper lies in that 1) the proposed wireless sensor is developed specifically for online fatigue crack detection and failure warning, 2) failure warning as well as crack diagnosis are provided based on crack-induced nonlinear ultrasonic modulation, 3) event-driven operation of the sensor, considering rare extreme events such as earthquakes, is made possible with a power minimization strategy, and 4) the applicability of the wireless sensor to steel welded members is examined through field and laboratory tests. A fatigue crack on a steel welded specimen was successfully detected when the overall width of the crack was around $30{\mu}m$, and a failure warnings were provided when about 97.6% of the remaining useful fatigue lives were reached. Four wireless sensors were deployed on Yeongjong Grand Bridge in Souht Korea. The wireless sensor consumed 282.95 J for 3 weeks, and the processed results on the sensor were transmitted up to 20 m with over 90% success rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.797-798
• /
• 2012

The purpose of this study to embody LED visible light communication visual signal delivery system based on TFT-LCD module and to analyze a performance for digital signals. LED lighting enables to transmit data through light, to embody visible light communication, and to control lights in different wavelengths according to LED materials and structural materials. In this study, we aim to create a transmitting and receiving sensor that has implemented LED and visual sensors to LED efficiency and existing TFT-LCD module so as to estimate and indicate a communication distance and to find out application methods and problems. Also, by implementing TFT-LCD technology and next-generation LED visual communication technology, this study aims to check the possibility of technological realization by applying them to various means of communication including ubiquitous communication.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.213-219
• /
• 2018

In this paper, we propose a design method and process for hardware and software of hybrid V2X communication module that supports both C-ITS communication protocol designed for vehicle environment and Legacy LTE communication technology. C-ITS is suitable for safety service applications due to its low latency characteristics, and Legacy LTE is a technology suitable for non-safety applications such as traffic information and infotainment due to high latency and high capacity. The hybrid V2X communication module supports multiple communication technologies of WAVE and LTE, in which WAVE supports multiple channels, so that it is designed to transmit road information such as LDM and positioning correction information to an autonomous vehicle in real time. The main design results presented in this paper will be applied to the implementation of future hybrid V2X communication terminals for vehicles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.11
• /
• pp.1144-1155
• /
• 2006

Digital communication networks have become a core technology in advanced building automation systems. BACnet(Building Automation and Control networks) is a standard data communication protocol designed specifically for building automation and control systems. BACnet adopts Master-Slave/Token-Passing(MS/TP) protocol as one of its field level networks. In this study, we introduce a method of implementing a bandwidth allocation scheme in the MS/TP protocol. The bandwidth allocation scheme improves the capability of real-time communication of the original MS/TP protocol. The bandwidth allocation scheme introduced in this paper can be easily implemented in the existing MS/TP protocol with a slight modification. In this study, we actually developed the hardware and firmware of the modified MS/TP communication module in which the bandwidth allocation scheme is implemented. Using the modified MS/TP communication module, we developed an experimental model in order to examine the validity of the bandwidth allocation scheme in the MS/TP protocol. Experimental results show that the modified MS/TP protocol satisfies the requirements of real time communication for periodic and urgent messages of BACnet communication services.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.595-598
• /
• 2005

본 논문은 HD급의 디지털 방송 수신을 위한 DTV Receiver의 Interface의 구현에 관한 솔루션을 소개 할 것이다. 이를 위해 DTV의 Platform 및 기본 동작을 위한 OS 및 회로 기술 등의 인터페이스 구성에 관한 내용에 관해 자세히 기술 할 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.810-816
• /
• 2011

The existing underwater acoustic communications modem is developing based on commercial products, so it is possible on functionality and performance of underwater acoustic communications modem implementation. But the production of development system is required to single platform system implementation at the system's size and cost. So this paper designs and implements the signal processing module as an important role to single hardware platform production of underwater acoustic communication modem by using TigerSHARC DSP processor.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1065-1066
• /
• 2008

We discuss about Design and Debugging for 1553B Communication. 1553B Communication is used in Aircraft and Satellite System. When we design a Satellite Control Computer, we apply a 1553B Communication among Satellite Control Computer and others. Satellite Control Computer has a PM32 Module, it is CPU and control module especially. In this paper, we show you a 1553B Communication Design and Debugging in the Satellite System.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2269-2270
• /
• 2008

Zigbee that is the wireless personal area networks communication technology for low power consumption is low-cost, low-power consumption, and small size and program code. From the present paper symbol and chip sequence of existing Zigbee module undergarment PN code generators which are a 1:1 mapping method it uses shift register and it plans the method which it proposes. The experimental result used Xilinx ISE and it measured synthesis and timing and power.