• Architectural research
• /
• v.7 no.2
• /
• pp.35-45
• /
• 2005

This study discusses "mechanisms" in a research facility, specifically focusing on the question of how we can understand what happens in the physical environment and the communication between researchers. This study attempts to address this question by examining two physical settings, before and after the move of one research-educational facility, the Institute of Paper Science and Technology. The objective of the study is to suggest conceptual models to comprehend the relationships between spatial layouts and communication. The study examines the underlying mechanism of how the levels of communication meet the layers of spatial structure. The paper has four parts. First, the preceding studies will be reviewed evoking some issues of communication and physical setting in research facilities. Second a conceptual typology in office plan will be developed providing a theoretical framework to review the spatial organization of the subject research facility, the Institute of Paper Science and Technology (IPST). Third, the spatial organization of the former building (before the move) and the present building (after the move) of IPST will be analyzed. Finally, conceptual models of the mechanism between the communication and the spatial organization will be drawn up.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.551-552
• /
• 2006

Plasma-induced charging damage was been measured during TaN gate electrode of MISFET(TaN/$HfO_2$/Si) or interconnection metal etching step using large antenna structures. The results of these experiments were obtained that $HfO_2$ gate dielectric layer was affected about plasma charging effects and damage increased with F-N tunneling. Therefore, the etching conditions should be optimized to avoid the defects caused by plasma charging.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.896-902
• /
• 2004

The purpose of the study of multi-robot system is to realize multi-robot system easy for the control of robot system in case robot is adapted in the complicated environment of task structure. The purpose of the study of multi-robot system is to realize multi-robot system easy for the control of robot system in case robot is adapted in the complicated environment of task structure. To make real time control possible by making effective use of recognized information in this dynamic environment, suitable distribution of tasks should be made in consideration of function and role of each performing robots. In this paper, IHMA (Intelligent Hybrid Modular Architecture) of Intelligent combined control architecture which utilizes the merits of deliberative and reactive controllers will be suggested and its efficiency will be evaluated through the adaptation of control architecture to representative multi-robot system.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.795-798
• /
• 1999

To transmit multimedia information efficiently and use it in realtime, it needs a private multimedia terminal for service type. But multimedia information terminal was developped for of offered service type in case by case. Accordingly, general multimedia terminal have not been developed yet. Multimedia database structure and standard communication protocol must be designed first to develop the general multimedia terminal. Multimedia database structure needs to store the various multimedia information consistently and, standard communication protocol access the database transparently. In this paper, we design a multimedia database structure and communication protocol that are able to access the multimedia information on distributed database servers in the network.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.886-898
• /
• 2015

The design feasibility of a micro unidirectional DC transmission system based on an input-parallel output-parallel (IPOP) converter is analyzed in this paper. The system consists of two subsystems: an input-parallel output-series (IPOS) subsystem to step up the DC link voltage, and an input-series output-parallel (ISOP) subsystem to step down the output voltage. The two systems are connected through a transmission line. The challenge of the delay caused by the communication in the control system is addressed by introducing a ring communication structure, and its influence on the control system is analyzed to ensure the feasibility and required performance of the converter system under practical circumstances. Simulation and experiment results are presented to verify the effectiveness of the proposed design.

• Journal of Information Processing Systems
• /
• v.20 no.3
• /
• pp.328-336
• /
• 2024

Visual communication is widely used and enhanced in modern society, where there is an increasing demand for spirituality. Museum robots are one of many service robots that can replace humans to provide services such as display, interpretation and dialogue. For the improvement of museum guide robots, the paper proposes a human-robot interaction system based on visual communication skills. The system is based on a deep neural mesh structure and utilizes theoretical analysis of computer vision to introduce a Tiny+CBAM mesh structure in the gesture recognition component. This combines basic gestures and gesture states to design and evaluate gesture actions. The test results indicated that the improved Tiny+CBAM mesh structure could enhance the mean average precision value by 13.56% while maintaining a loss of less than 3 frames per second during static basic gesture recognition. After testing the system's dynamic gesture performance, it was found to be over 95% accurate for all items except double click. Additionally, it was 100% accurate for the action displayed on the current page.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.35-38
• /
• 2005

In this paper, a wideband balun of tapered structure using planar microstrip is desigde ad analyzed. The balun structure was fabricated on a Teflon substrate with a thickness of 0.8mm and relative dielectric constant ${\varepsilon}_r$ of 2.5. Two back-to back CPW-to-CPS transitions were simulated and optimized using HFSS. A movel plaar balun using tapered structure of microstip to CPW is suggested and designed. The measurement result, the bandwidth for a reflection coefficient better than -10dB of the balun is 2GHz to 8GHz. The planar balun can improved the performance of wide band spiral antenna.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1647-1650
• /
• 2003

The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was 16${\times}$8 array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue lift curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.359-363
• /
• 2017

A slotted implantable patch antenna with microstrip feeding is proposed for industrial, scientific, and medical band applications. The result is verified by implanting the antenna in animal tissue. Further, by varying the ground width and introducing a defect into the ground structure, the antenna becomes applicable for worldwide interoperability for microwave access operations. A simulation is performed using Empire XCcel software. An Agilent vector network analyzer is used for analyzing the return loss performance. Simulated and measured results are compared. Antennas with and without defected ground structure both have key advantages including low profile, desirable return loss, good impedance matching and required bandwidth.