• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.643-647
• /
• 2014

Two types of fuel supply method ar used in CNG vehicles. One is premixed ignition and the other is gas-jet ignition. In premixed ignition, the fuel is introduced with intake air so that homogeneous air-fuel mixture may form. The ignitability of this method depends on the global equivalence ratio. In gas-jet ignition, CNG is introduced directly into the engine combustion chamber. The overall mixture is stratified by retarded fuel injection. In this study, a visualization technique was employed to obtain fundamental properties regarding overall mixture formation of direct injected CNG fuel inside a constant volume chamber. Jet angles, penetrations and projected jet area with respect to ambient pressure are investigated. The penetration decreases apparently and the time reaching the CVC wall was delayed as the chamber pressure increases. This is caused by the higher inertia of the fluid elements that the injected fluid must accelerate and push aside. It is same to liquid fuel such as diesel and gasoline, but this phenomenon is far more prominent for the gaseous fuel.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.1965-1971
• /
• 2010

선박 추진제어플랫폼은 안전한 항해를 위한 추진기관으로 사용되는 선박주기엔진의 원격운전 및 제어를 담당하는 시스템이다. 본 시스템은 안전하고 신뢰성 있는 운항을 보장하는 시스템이며, 원격제어 기술이 요구되는 시스템이다. 본 연구에서는 해당 시스템의 국산화를 위한 연구의 일환으로서 선박 추진제어시스템의 속도전달장치의 구현에 대해 연구하며, 시스템 분석과 설계 및 구현을 통해 해당 분야의 노하우와 원천기술을 확보하고 추후 추진 제어플랫폼의 통합화를 위한 기반기술을 확보하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.450-451
• /
• 2006

The method of conductor wiring is that a messenger wire is installed, the end of the wire is connected to the conductor and a engine puller pulls the conductor. The length of one section of wiring is $3{\sim}5km$ and one group messenger wire pulls simultaneously $2{\sim}4$ group conductor, while a tensioner maintains wiring tension to prevent the deflection of the conductor. However, there are many obstacles such as roads, power lines, communication lines, buildings, farms and crops. Therefore to prevent damage from conductor deflection a staging is used. The currently used staging is scaffolding lumber which is difficult to secure and it's construction efficiency is very low because it requires a lot of time and manpower. So this study developed a insulating defense tube and pipe connecting device, and a truss structure fabrication module using steel pipe which reduces construction time and cost through a compressive and dielectric strength test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.463-467
• /
• 2005

In this paper, the guidance law applicable to formation flight of UAV in three-dimensional space is proposed. The concept of miss distance, which is commonly used in the missile guidance laws, and Lyapunov stability theorem are effectively combined to obtain the guidance commands of the wingmen. The propose guidance law is easily integrated into the existing flight control system because the guidance commands are given in terms of velocity, flight path angle and heading angle to form the prescribed formation. In this guidance law, communication is required between the leader and the wingmen to achieve autonomous formation. The wingmen are only required the current position and velocity information of the leader vehicle. The performance of the proposed guidance law is evaluated using the complete nonlinear 6-DOF aircraft system. This system is integrated with nonlinear aerodynamic and engine characteristics, actuator servo limitations for control surfaces, various stability and control augmentation system, and autopilots. From the nonlinear simulation results, the new guidance law for formation flight shows that the vehicles involved in formation flight are perfectly formed the prescribed formation satisfying the several constraints such as final velocity, flight path angle, and heading angle.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권12호
• /
• pp.732-736
• /
• 2005

ln general, hospital information system should provide interoperability hat usually and operate independence of other HIS. This study proposes a new HIS paradigm that can be implemented within standard HL7 Interface engine and clinical data repository (CDR). We have developed an alternative architecture relying on agent solutions with distributed queries to heterogeneous databases. This architecture creates a very fine and flexible repository that can handle queries with the bases of standard HL7 messaging structure. Deploying Agent solutions to manipulate autonomy of storage management and sociality for communication with open world is another issue that keeps this system from reinventing existing wheels in medical informatics. This study the first attempt to construct CDR based private clinic. We used the information stored in the clinical patient record system of the internal medicine private hospital which is used rational database. We were searched increasing the 1,000 data entry from 1,000 to 10,000. By the result, experimental CDR showed highly efficient performance more than 6,000. In the future, the CDR can be further extended for clinical information among private hospitals estranged from EHR (Electronic Health Records).

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.29-36
• /
• 2016

The objective of this research is to development of a parametric design system for membrane structures. The parametric design platform for the spatial structures has been designed and implemented. Rhino3D is used as a 3D graphic kernel and Grasshopper is introduced as a parametric modeling engine. Modeling components such as structural members, loading conditions, and support conditions are developed for structural modeling of the spatial structures. The interface module with commercial structural analysis programs is implemented. An iterative generation algorithm for design alternatives is a part of the design platform. This paper also proposes a design approach for the parametric design of Spoke Wheel membrane structures. A parametric modeling component is designed and implemented. SOFiSTik is examined to interact with the design platform as the structural analysis module. The application of the developed interface is to design optimally Spoke Wheel Shaped Ductile Membrane Structure using parametric design. It is possible to obtain objective shape by controlling the parameter using a parametric modeling designed for shape finding of spoke wheel shaped ductile membrane structure. Recently, looking at the present Construction Trends, It has increased the demand of the large spatial structure. But, It requires a lot of time for Modeling design and the Structural analysis. Finally an optimization process for membrane structures is proposed.

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2003년도 International Costume Conference
• /
• pp.77-77
• /
• 2003

If we look closely to the power shift of the powerful countries historically. during the 16th century Spain's power came from gold, colony trade, the mercenary force, close relation with the thrown, 17th century Netherlands owes their power to trade, capital market, the marines, 18th century France owes it to population, agriculture, public administration, and the army. Also, England had their industry, political unity, finance and trust, the marines, liberalistic principles, a geographical merit of being an island which can be defended well and the 20th century America has their cosmopolitan culture, supernational communication, the capacity of the economy, science technology, military strength, alliances, liberalism international formation. But in the 21st century culture and art will prevail over the information age where technology and knowledge was the key, and it is predicted that this will be the source of power for a strong country. Rolfe Yesson, the head of The Copenhagen Research Center for future studies said, "Information age has ended and in the future Dream Society will arrive which focuses on making distinctions by delivering dreams and emotions to consumers". As cyberspace gradually substitutes reality, cyberspace has become more than an information search engine and has become a place where people fulfill their desires and exchange culture. And as a medium for diffusing culture, the importance of the digital dress-up avatar is predicted to increase gradually.gradually.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.303-324
• /
• 2004

The Component-Based Software Development (CBSD) has established itself as a sound paradigm in the software engineering discipline and has gained wide spread acceptance in the industry. The CBSD relies on the availability of standard software components for encapsulation of specific functionality. This paper presents the framework for the development of a software component for the design of general member cross-sections. The proposed component can be used in component-based structural engineering software or as a stand-alone program developed around the component. This paper describes the use-case scenarios for the component, its design patterns, object models, class hierarchy, the integrated and unified handling of cross-section behavior and implementation issue. It is expected that a component developed using the proposed patterns and model can be used in analysis, design and detailing packages to handle reinforced concrete, partially prestressed concrete, steel-concrete composite and steel sections. The component can provide the entire response parameters of the cross section including determination of geometric properties, elastic stresses, flexural capacity, moment-curvature, and ductility ratios. The component can also be used as the main computational engine for stand-alone section design software. The component can be further extended to handle the retrofitting and strengthening of cross-sections, shear and torsional response, determination of fire-damage parameters, etc.

• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.214-221
• /
• 2005

For decades, airships have being developed in Europe (especially German) and America. Airships are planning to be used for advertisements and airliners as well. In Korea, KARI (Korea Aerospace Research Institute) is developing stratospheric communication airship and the similar research is carried out in Japan. Among them, Zeppelin of German has the cutting-edge airship technology with Zeppelin NT. In this paper, the flight performance and stability were evaluated by comparing mathematical theory and the real test. The stability was examined through dynamic modeling and assured by designing controllers at each flight mode. Elevator angle, rudder angle, magnitude of thrust and tilting angle of thrust vector were used as control inputs. Moreover, after measuring the airship velocity, flight direction, magnitude and direction of the wind, attitude angles and trajectories of the airship at each flight mode, the results were compared with the simulation. To get the reasonable data, low-pass filter and band-stop filter were designed to get rid of the sensor noise and engine vibration. The test was accomplished at cruise mode, turning mode, and deceleration. To conclude, with comparing the simulation data and flight test data, it could be known that the dynamic model used in this paper was reasonable.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권4호
• /
• pp.167-174
• /
• 2003

This paper proposes a network processor especially optimized for content switching. With 2Gbps port capability, it integrates packet processor cluster, content-based classification engine and traffic manager on a single chip. A switch fabric architecture is also designed for scale-up of the network processor's capability over hundreds gigabit bandwidth. Applied in real network systems, the network processor shows wire-speed network address translator (NAT) and content-based switching performance.