• 제목/요약/키워드: Communication Effect Simulator

검색결과 61건 처리시간 0.029초

5D 가상현실 어트랙션을 위한 색상 및 밝기 보정 융합 기술 (Color and Brightness Calibration Convergence Technology for 5D Virtual Reality Attractions)

  • 한정수
    • 한국융합학회논문지
    • /
    • 제7권1호
    • /
    • pp.25-30
    • /
    • 2016
  • 가상현실의 기술에 있어서는 미국을 필두로 한 독식형 시장 그리고 유니버셜 등의 가상현실 아이템들이 증가하고 있는 추세이다. 다인칭의 사용자가 시각, 촉각, 청각, 운동감 등 온 몸으로 직접 체험을 하며 콘텐츠에 깊게 빠져들어 즐길 수 있는 새로운 형태의 콘텐츠 플랫폼을 개발해야 하며 관람객이 수동적으로 콘텐츠를 즐기는 것이 아니라 능동적으로 콘텐츠에 직접 참여하여 몰입도를 극대화 시킬 수 있는 콘텐츠 개발을 해야 한다. 이를 위해 $360^{\circ}$서클비전, 입체영상, 인터렉션, 시뮬레이터, 환경 Effect 등의 모든 요소가 혼합된 새로운 형태의 5D 가상현실 어트렉션 콘텐츠의 개발이 필요하며 이를 위한 색상 및 밝기 보정 기술 방법들을 제안하고자 한다.

WLAN/WiMAX 시스템에 적용 가능한 변형된 원형 링 안테나 설계와 제작 (Design and Manufacture of Modified Circular Ring antenna for WLAN/WiMAX Applications)

  • 임대수;윤중한
    • 한국정보통신학회논문지
    • /
    • 제18권2호
    • /
    • pp.268-275
    • /
    • 2014
  • 본 논문에서는 WLAN/WiMAX시스템에 적용 가능한 삼중 대역을 갖는 변형된 원형 링 안테나를 설계 및 제작 하였다. 제안된 안테나는 원형 링 모양의 평면형 모노폴 설계를 기본으로 원형 링 내부의 십자형 스터브의 구조와 변형된 급전선로, 그리고 접지면의 사각 슬롯으로 구성함으로서 삼중대역 특성을 갖도록 설계하였다. 최적화된 파라메타를 얻기 위해 상용 툴(HFSS)을 사용하여 시뮬레이션 하였으며 안테나 성능에 민감하게 작용하는 파라메타를 찾아내서 최적화된 수치를 얻었다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 제작하였다. 시뮬레이션 결과와 측정결과가 어느 정도 일치하고 있는 데이터를 얻었으며 -10dB 임피던스 대역폭을 기준으로 WLAN/WiMAX 대역을 동시에 만족하고 있음을 확인하였다. 그리고 WLAN/WiMAX 대역에서 이득과 방사패턴의 특성을 얻었다.

터널링 전계효과 트랜지스터로 구성된 3차원 적층형 집적회로에 대한 연구 (Study of monolithic 3D integrated-circuit consisting of tunneling field-effect transistors)

  • 유윤섭
    • 한국정보통신학회논문지
    • /
    • 제26권5호
    • /
    • pp.682-687
    • /
    • 2022
  • 터널링 전계효과 트랜지스터(tunneling field-effect transistor; TFET)로 적층된 3차원 적층형 집적회로(monolithic 3D integrated-circuit; M3DIC)에 대한 연구 결과를 소개한다. TFET는 MOSFET(metal-oxide-semiconductor field-effect transistor)와 달리 소스와 드레인이 비대칭 구조이므로 대칭구조인 MOSFET의 레이아웃과 다르게 설계된다. 비대칭 구조로 인해서 다양한 인버터 구조 및 레이아웃이 가능하고, 그 중에서 최소 금속선 레이어를 가지는 단순한 인버터 구조를 제안한다. 비대칭 구조의 TFET를 순차적으로 적층한 논리 게이트인 NAND 게이트, NOR 게이트 등의 M3DIC의 구조와 레이아웃을 제안된 인버터 구조를 바탕으로 제안한다. 소자와 회로 시뮬레이터를 이용해서 제안된 M3D 논리게이트의 전압전달특성 결과를 조사하고 각 논리 게이트의 동작을 검증한다. M3D 논리 게이트 별 셀 면적은 2차원 평면의 논리게이트에 비해서 약 50% 감소된다.

Enhanced MAC Scheme to Support QoS Based on Network Detection over Wired-cum-Wireless Network

  • Kim, Moon;Ye, Hwi-Jin;Cho, Sung-Joon
    • Journal of information and communication convergence engineering
    • /
    • 제4권4호
    • /
    • pp.141-146
    • /
    • 2006
  • In these days, wireless data services are becoming ubiquitous in our daily life because they offers several fundamental benefits including user mobility, rapid installation, flexibility, and scalability. Moreover, the requests for various multimedia services and the Quality of Service (QoS) support have been one of key issues in wireless data communications. Therefore the research relative to Medium Access Control (MAC) has been progressing rapidly. Especially a number of QoS-aware MAC schemes have been introduced to extend the legacy IEEE 802.11 MAC protocol which has not guaranteed any service differentiation. However, none of those schemes fulfill both QoS features and channel efficiency although these support the service differentiation based on priority. Therefore this paper studies a novel MAC scheme, referred to as Enhanced Distributed Coordination Function with Network Adaptation (EDCF-NA), for enhancements of both QoS and medium efficiency. It uses a smart factor denoted by ACK rate and Network Load Threshold (TH). In this paper, we study how the value of TH has effect on MAC performance and how the use of optimal TH pair improves the overall MAC performance in terms of the QoS, channel utilization, collision rate, and fairness. In addition, we evaluate and compare both the performance of EDCF-NA depending on several pairs of TH and the achievement of various MAC protocols through simulations by using Network Simulator-2 (NS-2).

3차원 포아송방정식을 이용한 FinFET의 포텐셜분포 모델 (Potential Distribution Model for FinFET using Three Dimensional Poisson's Equation)

  • 정학기
    • 한국정보통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.747-752
    • /
    • 2009
  • 본 연구에서는 FinFET에서 문턱전압이하 전류 및 단채널효과를 해석하기 위하여 필수적인 포텐셜분포를 구하기 위하여 3차원 포아송방정식을 이용하고자 한다. 특히 계산시간을 단축시키고 파라미터의 관련성을 이해하기 쉽도록 해석학적 모델을 제시하고자 한다. 이 모델의 정확성을 증명하기 위하여 3차원 수치해석학적 모델과 비교되었으며 소자의 크기파라미터에 따른 변화에 대하여 설명하였다. 특히 채널 도핑여부에 따라 FinFET의 채널 포텐셜을 구하여 향후 문턱전압이하 전류 해석 및 문턱 전압 계산에 이용할 수 있도록 모델을 개발하였다.

CMOS 카메라 이미지 센서용 ISP 구현 (An Implementation of ISP for CMOS Image Sensor)

  • 손승일;이동훈
    • 한국정보통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.555-562
    • /
    • 2007
  • CMOS 이미지 센서로부터 수신한 베이어 입력 스트림을 디스플레이 장치로 보기위해서는 영상 신호처리를 수행해야 한다. 즉, 이러한 영상 신호처리를 수행한 부분을 ISP(Image Signal Processor)라 한다. ISP 처리를 통해서 실제 원본 이미지를 볼 수 있다. ISP는 감마교정, 인터폴레이션, 공간적 변환, 이미지 효과, 이미지 스케일, AWB, AE, AF 등과 같은 기능을 수행한다. 본 논문에서는 CMOS 카메라 이미지 센서용 ISP를 모델링하여 최적화 알고리즘을 소프트웨어 검증을 통해 도출하였으며, VHDL 언어를 이용하여 설계하고 ModelSim6.0a 시뮬레이터를 이용하여 검증하였다. 또한 보드 레벨의 검증을 위해 PCI 인터페이스를 이용하여 설계한 ISP 모듈을 자일링스 XCV-1000e에 다운로드하여 결과를 확인하였다.

Implementation of Low Complexity FFT, ADC and DAC Blocks of an OFDM Transmitter Receiver Using Verilog

  • Joshi, Alok;Gupta, Dewansh Aditya;Jaipuriyar, Pravriti
    • Journal of Information Processing Systems
    • /
    • 제15권3호
    • /
    • pp.670-681
    • /
    • 2019
  • Orthogonal frequency division multiplexing (OFDM) is a system which is used to encode data using multiple carriers instead of the traditional single carrier system. This method improves the spectral efficiency (optimum use of bandwidth). It also lessens the effect of fading and intersymbol interference (ISI). In 1995, digital audio broadcast (DAB) adopted OFDM as the first standard using OFDM. Later in 1997, it was adopted for digital video broadcast (DVB). Currently, it has been adopted for WiMAX and LTE standards. In this project, a Verilog design is employed to implement an OFDM transmitter (DAC block) and receiver (FFT and ADC block). Generally, OFDM uses FFT and IFFT for modulation and demodulation. In this paper, 16-point FFT decimation-in-frequency (DIF) with the radix-2 algorithm and direct summation method have been analyzed. ADC and DAC in OFDM are used for conversion of the signal from analog to digital or vice-versa has also been analyzed. All the designs are simulated using Verilog on ModelSim simulator. The result generated from the FFT block after Verilog simulation has also been verified with MATLAB.

혼합현실 기반 방사선 안전교육 시뮬레이터 플랫폼 개발 : 의료분야 중심으로 (Mixed Reality Based Radiation Safety Education Simulator Platform Development : Focused on Medical Field)

  • 박형후;심재구;권순무
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권2호
    • /
    • pp.123-131
    • /
    • 2021
  • In this study, safety education contents for medical radiation workers were produced based on Mixed Reality(MR). Currently, safety training for radiation workers is based on theory. This is insufficient in terms of worker satisfaction and efficiency. To address this, we created ICT(Information and Communication Technologies)-based MR radiation worker safety education content. The expected effect of Mixed Reality worker safety education content is that education is possible without space and time constraints, realistic education is possible without on-site training, and interaction between images is possible through reality-based 3D images, enabling self-directed learning Is that. In addition, learning in a virtual space expressed through HMD(Head Mounted Display) is expected to make education more enjoyable and increase concentration, thereby increasing the efficiency of education. A quantitative evaluation was conducted by an accredited institution and a qualitative evaluation was performed on users, which received excellent evaluation. The MR safety education conducted in this study is expected to be of great help to the education of medical radiation workers, and is expected to develop into a new educational paradigm as online education in accordance with Corona 19 progresses.

해상 무선통신을 위한 이중대역 마이크로 스트립 안테나 설계 (Design of Dual-Band Microstrip Antenna for Marine Telecommunication)

  • 최조천;이광복;김갑기;이성로
    • 한국통신학회논문지
    • /
    • 제39C권12호
    • /
    • pp.1314-1317
    • /
    • 2014
  • 본 논문에서는 LTE와 WiMAX 시스템에 적용 가능한 마이크로스트립 패치 안테나를 설계하였다. 제안된 모노폴 안테나의 기판은 FR-4이고 크기는 $70.88mm{\times}54.88mm$이다. 제안된 안테나는 평면형 모노폴 설계를 기본구조로 구성함으로서 LTE와 WiMAX 대역을 포함하는 이중대역 특성을 갖도록 설계하였다. 최적화된 파라메타를 얻기 위해 상용 툴(CST's Microwave Studio Program)을 사용하여 시뮬레이션 하였으며 안테나 성능에 민감하게 작용하는 파라메타를 찾아내서 최적화된 수치를 얻었다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 설계하였다. 따라서 제안된 안테나는 LTE와 WiMAX 대역을 동시에 만족하였다. 그리고 LTE와 WiMAX 대역에서 좋은 이득과 방사패턴의 특성을 얻었다.

양극성 이중 독립 게이트 실리콘 나노와이어 전계 효과 트랜지스터 설계 (Design of Double-Independent-Gate Ambipolar Silicon-Nanowire Field Effect Transistor)

  • 홍성현;유윤섭
    • 한국정보통신학회논문지
    • /
    • 제19권12호
    • /
    • pp.2892-2898
    • /
    • 2015
  • 양극성 이중 독립 게이트 실리콘 나노와이어 전계 효과 트랜지스터를 새롭게 제안한다. 제안한 트랜지스터는 극성 게이트와 제어 게이트를 가지고 있다. 극성게이트의 바이어스에 따라서 N형과 P형 트랜지스터의 동작을 결정할 수 있고 제어 게이트의 전압에 따라 트랜지스터의 전류 특성을 제어할 수 있다. 2차원 소자 시뮬레이터를 이용해서 양극성 전류-전압 특성이 동작하도록 두 개의 게이트들과 소스 및 드레인의 일함수를 조사했다. 극성게이트 4.75 eV, 제어게이트 4.5 eV, 소스 및 드레인 4.8 eV일 때 명확한 양극성 특성을 보였다.