• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.248-256
• /
• 2008

본 논문은 고속철도 주변 통신회선에 발생되는 잡음전압의 실체 파악을 통해 전력유도잡음전압이 발생하지 않는 것을 증명하였으며, 국내통신회사 및 전파연구소에서 사용하고 있는 평형도 측정에서의 문제점과 계측 오류를 규명하며 표준 측정회로와 측정 조건을 ITU-T 국제 기준에 맞도록 개정할 것을 제안한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.74-77
• /
• 1998

We consider connection-oriented wireless cellular networks. These networks employ dedicated radio channels for the transmission of signaling information. A forward signaling channel is a common signaling channel assigned to carry the multiplexed stream of paging and channel allocation(virtual circuit allocation) packets from a base station to mobile stations. The delay levels experienced by paging and channel allocation packets have serious effect on the utilization level of the limited radio channel capacity. While a slotted mode operation is used to reduce the power consumption level at mobile stations, it may induce an increase in packet delay levels. In this paper, we thus consider a multiplexing scheme for paging and channel allocation packets under which slots are dynamically allocated for the paging packet transmission. For this dynamic scheme, we develop an analytical method for deriving the delay characteristics exhibited by paging and channel allocation packets, and investigate the effect of network parameters on the delay level by using this method.

• 융합신호처리학회논문지
• /
• 제9권4호
• /
• pp.280-287
• /
• 2008

간접접촉 심전도(IDC-ECG) 측정에 공통 모드 잡음을 줄이기 위해 오른발 구동(Driven-right-leg) 접지 방법을 적용하고 그 접지의 성능을 조사하였다. 최근에 소개된 간접접촉 심전도 측정 기술은 전극과 인체 피부간의 직접 접촉이 필요하지 않기 때문에, 최근에 필요성이 대두되고 있는 가정에서의 장기간 무구속 심전도 측정에 적합한 측정방법으로서 현재 다양한 응용이 연구되고 있다. 그렇지만 간접접촉 심전도는 전원선에 의한 60Hz 잡음이 기존 측정 방법보다 크게 발생하여, 응용 범위의 확대에 제약 조건이 되고 있다. 본 연구에서는, 기존의 심전도 측정 방법에 사용되는 오른발 구동 접지 방법을 간접접촉 심전도 측정 방법에도 적용하여, 공통모드 잡음 성분을 반전 증폭하여 의자 좌판(seat)에 깔린 전도성 직물을 통해 인체에 feedback하였다. 이로써 피부와 직접 접촉이 없는 간접 접촉 방식의 오른발 구동 접지를 구현하였으며, 이 접지가 안정적으로 동작되고, 오른발 구동 이득이 약 1000정도에서 40dB 수준의 전원 잡음 감소 됨을 확인할 수 있었다. 이 연구의 결과로 간접접촉 심전도의 주파수 대역을 기존의 30Hz이하에서 100Hz 수준까지 높일 수 있게 되었으며, 접지 임피던스를 높일 수 있게 되어 간접접촉 심전도의 응용 분야를 더욱 넓힐 수 있게 되었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.571-574
• /
• 1997

fMRI, functional MRI introduced recently appears based on the gradient echo technique which is sensitive to the field inhomogeneity developed due to the local susceptibility changes of blood oxygenation and deoxygenation. Common to all the gradient echo techniques is that the signal due to the susceptibility effects is generally decreased with increasing inhomogeneity due to the $T2^*$ effect or conventionally known as blood oxygenation level dependent (BOLD) effect. It is, also found that the BOLD sensitivity is also dependent on the imaging modes, namely whether the imaging is in axial, or coronal or sagittal mode as well as the directions of the vessels against the main magnetic field. We have, therefore, launched a systematic study of imaging mode dependent signal change or BOLD sensitivity as well as the signal changes due to the tilting angle of the imaging planes. Study has been made or both TRFGE sequence and CGE sequence to compare the distinctions of the each mode since each technique has different sensitivity against susceptibility effect. Method of computation and both the computer simulations and their corresponding experimental results are presented.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1088-1096
• /
• 2017

Load variations on a distribution line result in voltage fluctuations at the point of common coupling (PCC). In order to keep the magnitude of the PCC voltage constant at its rated value and obtain zero voltage regulation (ZVR), a D-STATCOM is installed for voltage correction. Moreover, the ZVR mode of a D-STATCOM can also be used to balance the source current during unbalanced loading. For medium voltage and high power applications, a D-STATCOM is realized by the cascaded H-bridge topology. In the ZVR mode, the D-STATCOM may draw unbalanced current and in this process is required to handle different phase powers leading to deviations in the cluster voltages. Zero sequence voltage needs to be injected for ZVR mode, which creates circulating power among the phases of the D-STATCOM. The computed zero sequence voltage and the individual DC capacitor balancing controller help the DC cluster voltage follow the reference voltage. The effectiveness of the control scheme is verified by modeling the system in MATLAB/SIMULINK. The obtained simulations are further validated by the experimental results using a dSPACE DS1106 and five-level D-STATCOM experimental set up.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.791-794
• /
• 2003

The increasing computational capability of processors is driving the need for high bandwidth links to communicate and store the information that is processed. Such links are often an important part of multi processor interconnection, processor-to-memory interfaces and Serial-network interfaces. This paper describes a 0.11-${\mu}{\textrm}{m}$ CMOS 4 Gbp s/pin 3-Level transceiver using RSL/(Rambus Signaling Logic) for high bandwidth. This system which uses a high-gain windowed integrating receiver with wide common-mode range which was designed in order to improve SNR when operating with the smaller input overdrive of 3-Level. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by low pass effects of channel, process-limited on-chip clock frequency, and serial link distance. In order to detect the transmited 4Gbps/pin with 3-Level data sucessfully ,the receiver is designed using 3-stage sense amplifier. The proposed transceiver employes multi-level signaling (3-Level Pulse Amplitude Modulation) using clock multi phase, double data rate and Prbs patten generator. The transceiver shows data rate of 3.2 ~ 4.0 Gbps/pin with a 1GHz internal clock.

• 복식
• /
• 제47권
• /
• pp.19-32
• /
• 1999

The results from the consideration of this are as follows. 1. Dan dynasty has been 10-parts dancer and musician group for courtesy ceremonial meetings of ancient china. 2. Except ceremonial dance and music common dance and musics performed it in front of common peaples meetings. 3. After unification of Dang dynasty many commercial men and artist come frome western of China threfore influenced their costume habbits and behabiers from royal families costumes and common peaples costume without concern of that one's social position. 4. As the people who lived in thewest areas of old china there characterestics of the costumes are open breast jacked breast laped long skirt long scarf long boots narrow sleeve jackets patterend textilles(for womens) round neck narrow sleeved one-pies dress belt, long boots. patterend textiles(for mens). 5. Dancer's Costumes mode are as follows: 1) For females : high hair style, Twin 'high hair style. jewrery decorated hat bird's hair decorated cap. ribons. 2) For mens: Bok-doo. Hokongdu 6. Except traditional old china dancer dress they have many interested dancer dress for instance dang dynasty's 'Ye-sang woo yui dnace' dancer dress is very elegant and interested hip level jacket has peacoak wing shaped sleeves and long skirt has try angles shape attached apron this dancer dress begins wi-jin nam·book-dynasty. 7. Men dancer dress is just head cap bok doo long narrow sleeved one-pies dress.

• 한국통신학회논문지
• /
• 제39B권5호
• /
• pp.251-259
• /
• 2014

본 논문은 IEEE 802.15.8 Peer Aware Communications (PAC) common 발견 모드를 위한 초절전 서비스 발견 프로토콜을 제안한다. 전력 소비를 최소화하기 위해서 Basic Repetition Block (BRB)를 정의한다. BRB를 통해서 단말은 동작모드를 선택할 수 있으며 다른 단말들과 동기를 맞출 수 있다. 제안한 MAC 절차는 overhearing기반의 Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)이다. overhearing을 통해 단말이 요청 신호를 보낸 후 응답신호를 받지 못하더라도 동일 그룹의 단말을 발견할 수 있다. IEEE 802.15.8 PAC 에서는 common 발견모드의 성능을 시뮬레이션 시간동안 발견된 평균 단말 수, 발견 latency, 평균 전력소비에 관해서 제시할 것을 요구하고 있다. 그룹 당 단말의 수와 채널 환경을 고려하여 2가지 시나리오에 대해 시뮬레이션을 수행하고 제안한 기법의 결과를 CSMA/CA와 비교한다. 그 결과 제안한 기법은 단말은 높은 에너지 효율을 얻을 수 있을 뿐 아니라 제한된 영역에 단말의 수가 많을수록 시뮬레이션 시간 동안 발견된 평균 단말의 수가 증가함을 알 수 있다.

• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.447-468
• /
• 2015

Modal identification of civil engineering structures based on ambient vibration measurement has been widely investigated in the past decades, and a variety of output-only operational modal identification methods have been proposed. However, vibration modes, even fundamental low-order modes, are not always identifiable for large-scale structures under ambient vibration excitation. The identifiability of vibration modes, deficiency in modal identification, and criteria to evaluate robustness of the identified modes when applying output-only modal identification techniques to ambient vibration responses were scarcely studied. In this study, the mode identifiability of the cable-stayed Ting Kau Bridge using ambient vibration measurements and the influence of the excitation intensity on the deficiency and robustness in modal identification are investigated with long-term monitoring data of acceleration responses acquired from the bridge under different excitation conditions. It is observed that a few low-order modes, including the second global mode, are not identifiable by common output-only modal identification algorithms under normal ambient excitations due to traffic and monsoon. The deficient modes can be activated and identified only when the excitation intensity attains a certain level (e.g., during strong typhoons). The reason why a few low-order modes fail to be reliably identified under weak ambient vibration excitations and the relation between the mode identifiability and the excitation intensity are addressed through comparing the frequency-domain responses under normal ambient vibration excitations and under typhoon excitations and analyzing the wind speeds corresponding to different response data samples used in modal identification. The threshold value of wind speed (generalized excitation intensity) that makes the deficient modes identifiable is determined.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1006-1011
• /
• 2018

본 논문은 멀티비트 플라잉 커패시터의 전압제어를 이용한 3-레벨 벅 변환기를 제안한다. 기존의 3-레벨 벅 변환기는 플라잉 커패시터 전압을 제어하지 못하여 동작이 불안정하거나 플라잉 커패시터 전압을 제어하는 회로가 PWM방식에 적용되지 못하는 문제가 있었다. 또한 부하전류에 증가할 때 인덕터 전압에 오차가 발생하였다. 본 논문에서 제안하는 구조는 입력이 4개인 차동증폭기와 공통모드 피드백 회로를 이용하여 PWM모드에서 플라잉 커패시터 전압을 제어할 수 있다. 또한 3비트 플라잉 커패시터 전압 제어회로를 제안하여 부하전류에 따른 3-레벨 벅 변환기의 동작을 최적화할 수 있으며 슈미트 트리거 회로를 이용한 삼각파 생성 회로를 제안하였다. 제안하는 3-레벨 벅 변환기는 $0.18{\mu}m$ CMOS 공정으로 설계되었으며 2.7~3.6V의 공급 전압 범위와 0.7V~2.4V의 출력 전압 범위를 갖는다. 동작 주파수는 2MHz, 부하전류 범위는 30mA~500mA이며 출력 전압 리플은 최대 32.5mV로 측정되었다. 측정 결과 130mA의 부하전류에서 약 85%의 최대 전력변환 효율을 보인다.