• 제목/요약/키워드: Common-Mode

검색결과 860건 처리시간 0.031초

다이오드 정류기/Z-소스 인버터 시스템의 공통모드 전압 해석 (Analysis of Common Mode Voltages at Diode Rectifier/Z-Source Inverter System)

  • 트란콴빈;전태원;이홍희
    • 전력전자학회논문지
    • /
    • 제14권4호
    • /
    • pp.285-292
    • /
    • 2009
  • 본 논문은 다이오드 정류기와 Z-소스 인버터로 교류전동기 구동 시 암 단락 (shoot-through) 상태와 비 암 단락 상태를 나누어 각각 등가회로를 구성하고 공통모드 전압을 분석한다. 음의 값의 공통모드 전압을 감소시키기 위하여 암 단락 시간 제어와 함께 영전압 벡터인가 구간을 제거하는 변형 공간벡터변조기법을 제시한다. PSIM과 32-비트 DSP를 사용한 실험 및 시뮬레이션 결과를 통하여 음의 공통모드전압이 50%이상 감소됨을 확인하였다.

EMI Noise Reduction with New Active Zero State PWM for Integrated Dynamic Brake Systems

  • Baik, Jae-Hyuk;Yun, Sang-Won;Kim, Dong-Sik;Kwon, Chun-Ki;Yoo, Ji-Yoon
    • Journal of Power Electronics
    • /
    • 제18권3호
    • /
    • pp.923-930
    • /
    • 2018
  • Based on the application of an integrated dynamic brake (IDB) system that uses a PWM inverter fed-AC motor drive to operate the piston, a new active zero state PWM (AZSPWM) is proposed to improve the stability and reliability of the IDB system by suppressing the conducted electro-magnetic interference (EMI) noise under a wide range of load torque. The new AZSPWM reduces common-mode voltage (CMV) by one-third when compared to that of the conventional space vector PWM (CSVPWM). Although this method slightly increases the output current ripple by reducing the CMV, like the CSVPWM, it can be used within the full range of the load torque. Further, unlike other reduced common-mode voltage (RCMV) PWMs, it does not increase the switching power loss. A theoretical analysis is presented and experiments are performed to demonstrate the effectiveness of this method.

Common Mode Noise Reduction for an LLC Resonant Converter by Using Passive Noise Cancellation

  • Ryu, Younggon;Kim, Sungnam;Jeong, Geunseok;Park, Jaesu;Kim, Duil;Park, Jongwook;Kim, Jingook;Han, Ki Jin
    • Journal of electromagnetic engineering and science
    • /
    • 제15권2호
    • /
    • pp.89-96
    • /
    • 2015
  • This paper describes the application of a passive noise cancellation method to a prototype inductor-inductor-capacitor (LLC) resonant converter by placing a compensation winding in a transformer to reduce common mode noise. The connection method for the compensation winding is investigated. A circuit analysis is implemented for the displacement currents between the primary and secondary windings in the transformer. The analyzed displacement currents are verified by performing a circuit simulation and a proper compensation winding connection that reduces common mode noise is found. The measurement results show that common mode noise is reduced effectively up to 20 dB in the 1 to 7 MHz frequency region for the prototype LLC resonant converter by using the proposed passive noise cancellation method.

Common Mode Stub를 이용한 Flexible T-DMB 안테나 구현 (Design Flexible T-DMB Antenna with Common Mode Stub)

  • 이선현;김호진;이상석;이영훈
    • 한국전자파학회논문지
    • /
    • 제22권6호
    • /
    • pp.605-612
    • /
    • 2011
  • 본 논문에서는 차량 앞유리에 탈부착이 가능한 다이폴 형태의 T-DMB 수신용 안테나를 설계하였다. 안테나의 구조는 동박과 급전선의 매우 간단한 구조를 가지며, 운전자의 시야에서 완벽히 벗어날 수 있도록 차량 유리의 테두리 쪽에 존재한다. 차체의 특성과 안테나의 입력 임피던스 특성을 고려하여 제안된 미앤더 형태의 다이폴 안테나는 T-DMB 주파수 대역(174~216 MHz)을 만족한다. Common Mode Stub를 추가한 Flexible 안테나는 차량 앞유리에서 부착되는 위치에 상관없이 안테나의 입력 반사 손실은 -5 dB 이하를 가지는 것이 가장 큰 특징이다.

의존적 인간 실수를 고려한 중복 시스템의 Common Mode Failures의 분석 (The Common Mode Failures Analysis of The Redundant System with Dependent Human Error)

  • Myung Ki Kim;Soon Heung Chang
    • Nuclear Engineering and Technology
    • /
    • 제15권4호
    • /
    • pp.229-235
    • /
    • 1983
  • 원자력발전소에서 Common Mode Failures (CMFs)가 상당한 관심을 모으고 있다. 이 논문에서는 중복 시스템의 비가용도(Unavailability)에 있어서의 전체 CMFs를 잠재적 CMFs(Potential CMFs)와 의존성 인간 실수에 의한 CMFs (CMFs of dependent human error)로 나누어 이론적으로 고찰하였다. 결론적으로, 인간 실수의 의존성이 높아질수록 전체 CMFs는 의존성 인간실수에 의해서 주로 영향을 받는다고 할 수 있다. 역으로, 인간 실수의 의존성이 낮아질수록, 전체 시스템의 비가용도는 기계적 고장이나 의존성 인간실수보다 잠재적 CMFs에 의해 지배된다고 할 수 있다. 그리고, 중복 시스템의 비가용도에 있어서 전체 CMFs가 기계적 고장보다 주된 요소임도 알 수 있었다.

  • PDF

3상 PWM 전압형 인버터에 발생하는 누설전류와 동상모드 전압의 억제 (The Suppression of both leakage current and common-mode voltage occurring three phase PWM voltage type inverter)

  • 문상필;서기영;권순걸;김주용;김영문;김해제;김종실
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1515-1517
    • /
    • 2005
  • In this paper, we represent both occurrence reason of Surge-voltage and Leakage-current of AC drive system which is operated by Voltage-type PWM Inverter. It generates a compensating voltage which has the same amplitude as, but the opposite phase to, the common-mode voltage produced by the PWM inverter. The compensating voltage is superimposed on the inverter output by a common-mode transformer. As a result, the common-mode voltage applied to the load is canceled completely. The design method of the active common-mode noise canceler is also presented in detail. Therefore, we try to describe the method controling both of them and all of the proprieties are proved by our experiment.

  • PDF

3-레벨 NPC 인버터에서 보조 레그를 이용한 공통 모드 전압 제거 (Cancellation of Common-Mode Voltages in Three-Level NPC Inverters with Auxiliary Leg)

  • 리쿠억안;이동춘
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.487-488
    • /
    • 2016
  • In this paper, a new active circuit for common-mode voltage (CMV) cancellation in three-level NPC (neutral-point clamped) inverters is proposed, which can avoid the saturation of the common-mode transformer (CMT). The proposed circuit utilizes an additional three-level leg to produce the compensating CMV of the NPC inverters, which eliminates the CMV of the inverter through the CMT.

  • PDF

Common-Mode Current on a Wire through a Corrugated Aperture

  • Park, Hyun-Ho;Lee, Jae-Wook;Kwon, Jong-Hwa;Lee, Hyung-Soo
    • ETRI Journal
    • /
    • 제24권6호
    • /
    • pp.429-434
    • /
    • 2002
  • This paper investigates the effect of a corrugated aperture on a common-mode current traveling along a penetrating wire. Computational results illustrate that the corrugated aperture acts as a filter, significantly reducing the common-mode current on the wire. This effect causes a reduction of radiated emission from cables passing through apertures on shielding enclosures. To predict and analyze the characteristics of the common-mode current on a straight wire passing through a corrugated aperture with cylindrical symmetry, the finite-difference time-domain (FDTD) method is applied.

  • PDF

A Switching Technique for Common Mode Voltage Reduction of 2-Level Inverter

  • Yun Hwan-Kyun;Kim Lee-Hun;Kim Jun-Ho;Won Chung-Yuen;Choi Gi-Su;Bae Joung-Hwan
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.438-442
    • /
    • 2001
  • Much attention has given to EMI effects created by variable speed ac drive system. This paper focuses on the switching technique to mitigate common mode voltage. Zero switching states of inverter control invoke large common mode voltage. Using inversed carrier wave, zero switching states are removed. In addition, proposed technique is easy to apply to existing 2-level inverter design. And common mode mitigation technique for sinusoidal PWM is also presented. Proposed switching technique is implemented with a 2.2kw 1735rpm induction motor.

  • PDF

Design of Balanced Dual-Band Bandpass Filter with Self-Feedback Structure

  • Chen, Xinwei;Han, Guorui;Ma, Runbo;Gao, Jiangrui;Zhang, Wenmei
    • ETRI Journal
    • /
    • 제31권4호
    • /
    • pp.475-477
    • /
    • 2009
  • A balanced dual-band bandpass filter based on ${\lambda}$/2 stepped-impedance resonators and open-loop resonators is proposed in this letter. By employing a type of self-feedback structure, an extra transmission zero is introduced near the common-mode resonance frequency, and the common-mode signal is suppressed. The measured results indicate that the filter can operate in 2.46 GHz and 5.6 GHz bands, and the insertion loss is 1.85 dB and 1.9 dB, respectively. Also, better common-mode suppression is achieved.