• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.43-44
• /
• 2006

We have studied electro-optical characteristics and stability of liquid crystal director depending on electrode patterning of common electrode on top substrate in patterned vertical alignment (PVA) mode. In the present studies, new type of common electrode pattern was suggested to enhance a dark state by reducing interference area due to data signal. According to the simulation result, PVA device with new common electrode pattern contributed to Improvement of an aperture ratio.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2005

In order to find out the environmental factors influencing movement of common grey mullet, Mugil cephalus in funnel net fishing ground of the Dolsan-do, Yeosu southern sea area, the oceanographic factor such as the water temperature, isobath and tidal current were observed respectively, the water temperature was compared with the amount of common grey mullet caught by funnel net. Also, to investigate the movement direction of common grey mullet in same sea area, 160 common grey mullets of body length 22 to 51cm caught at funnel nets of the Dolsan-do southern sea area were marked and then released at 5 positions in 5 times. The results obtained are summarized as follows : 1. The water temperature at the funnel net fishing ground of Dolsan-do in 2002 was ranged from 6.9 to 27.4$^{\circ}C$. The water temperature was displayed a maximum value in August to increase from March and a minimum value in February of the ensuing year to decrease from September. The catches of gray mullet caught by funnel net were generally abundant from March to September, but decreased sharply from October. The optimum range of water temperature for the funnel nets fishing was situated between 15.0 to 25.0$^{\circ}C$. 2. The isobath from 6m to 13m in coast sea set up funnel nets were densely distributed and the depth more than 14m of isobath were widely spreaded to the open sea at Dolsan-do southern sea area. 3. The tidal current of the coast sea set up funnel nets flowed southward and northward along the coast ato ebb and flood tide respectively. The direction of tidal current to the open sea was southeast at ebb tide with the mean speed 43cm/sec, but northwest at flood with the mean speed 25cm/sec. 4. The recapture rate through the experiment duration showed 9.4%. The recapture rate in Gyedong area was very high value with 33.3% as compared with others. The movement of common grey mullet in Dolsan-do southern sea area trended toward a inner bay and north bound mainly.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.82-89
• /
• 2019

In this study observation records of the National Natural Environment Survey (2008-2012, 2014-2017) and the Korean Natural History Research Information System (KNHRIS) for the common kestrel (2013-2016) were consulted to determine the correlation of the distribution of kestrels in an area and the area's land use type. Distribution characteristics were studied based on data collected over the last 10 years (2008-2017). Findings show that the common kestrel is widely distributed between 4,407 sites registered in KNHRIS in the period of 2008-2012, 3,899 sites in 2014-2017, and 508 sites in 2013-2016. Relationship analysis was conducted for the altitude and urban planning factors of statistics based on a 2017 GIS check to determine the distribution characteristics. The birds' altitude was confirmed to range from 0 to 1,200 metersck but was most commonly observed at less than 100 meters. Above 200 meters, the rate of occurrence decreased rapidly. The rate of occurrence of the common kestrel was highest in Chungcheongnam-do province, followed by Gyeongsangbuk-do, Kyonggi-do, Jeollanam-do and Jeollabuk-do. As urban areas, green areas, commercial areas, and industrial areas the presence of swere positively correlated with the presence of kestrels, the rate of occurrence of the kestrel was higher in those regions. However, there was no significant relationship between the incidence of kestrels and housing construction or residential areas.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.2
• /
• pp.204-209
• /
• 2020

We investigated the physicochemical properties of brown rice by cultivar to select cultivar suitable for making brown rice porridge. The moisture content of the brown rice ranged from 8.79~11.78% with the highest varieties being 'Geonyangmi'. The crude ash and crude lipid content ranged from 1.02~1.65% and 1.65~3.26%, while the rest were similar except for 'Daebo'. Crude protein also had the lowest 'Daebo' and generally glutinous rice showed higher crude protein content than common rice. The hardness showed that 'Seolgaeng' and 'Keunnun' were the lowest, and 'Haiami' was the highest. In the RVA analysis, the setback was in the range -80.61~22.44 and was low in the order of 'Wolbaek', 'Baekjinju'', and 'Dongjinchal'. As a result of water binding capacity (WBC) measurement, 'Sindongjin', 'Geonyang' and 'Samkwang', were high in common rice, and 'Dongjinchal' and 'Hwaseonchal' were high in glutinous rice. Generally, solubility and swelling power in common rice was found to be lower than in glutinous rice. As a result, 'Samkwang' is considered suitable for brown rice porridge production because of high WBC, breakdown, and low setback.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.53-61
• /
• 2011

As the standard of living has raised and the local self-governing body has enforced, cultural facilities have been increased in local areas. These cultural facilities should be designed to consider various users. However, most facilities were designed to focus on size or visual expressions. Therefore, this study was intended to evaluate common spaces of two cultural centers in local area from the universal design point of view. Two cultural centers located in large apartment complex were selected. The evaluating tool consisted of 46 elements related to universal design. The common space were pathway to entrance, parking lot, entrance, all over building, corridor, and restroom. Each 100 users of these two cultural centers evaluated them using by 5-point Likert scale. The results were as follows; The users rated them positively, but not highly. This means that some improvement were needed. Generally, the consideration for upgrading the quality of design such as material, pattern and color needed, and for various users including wheelchair users and seniors were needed. Also, when considering the users' behavior pattern and purposes, installing canopy over entrance, and providing seating places at corridor or pathway were needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.32-36
• /
• 2008

Multiplierless FIR filters can be designed by only adders using Common Subexpression algorithm. It has small area compared with filter which using multipliers. But it has long operation time because of carry ripple from the adder. In this paper, when the subexpressions are added in multiplier less filters, the number of subexpressions maintains 2 until final addition to avoid carry ripple of the addition, so the subexpression addition time of the filter can be reduced. To verify proposed method, subexpression adder circuit of the FIR filter is designed using given example of paper. The designed filter was synthesized using Hynix 0.18um process. By Synopsys simulation results, it is shown that by the proposed method, area, propagation delay time can be reduced up to 53.2%, 57.9% compared with conventional design method which using pipeline.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.372-382
• /
• 1998

This study aims to reveal the dissolving process around the customary common right to forest utilization through a series of policies consolidating the modern forest ownerships in Korea under the rule of Japanese Imperialism. The existence of the customary common right to forest utilization has been widely recognized since the old time. Common profitable actions in a certain area have been given to village residents to gain useful materials such as forage, timber, fuelwood, wild animals, soil, grazing, and quarry in forest, which were necessarily required for their own daily life as customary commodities. This right was divided into the right around common forests and special easement in forests. Therefore, the common forests applicable of these rights were classified into village common forests and special easement forests. Especially, General-Government granted the national forests in pre-emption to a private(88.6%, 2,463,555chungbo) or public(12.1%, 299,050chungbo). After all, most of the common forests were transferred into national forests in earlier stage and then later into public ar private forests by Japanese Imperialism.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.55-56
• /
• 2013

본 논문에서는 센서 클러스터에서 액터를 재배치하기 위하여 센서신호 공통 중첩영역을 추출하는 기법을 분석한다. 기존의 액터 재배치 알고리즘은 CH (Cluster Head)와 동일하게 센서들과 연결을 설정하고자 하는 액터를 CH가 있는 위치로 이동시킨다. 이러한 액터의 이동방법은 액터와 CH를 단순하게 결합하여 액터를 재배치하는 것이며, 액터와 CH가 서로 중첩되거나 충돌하는 문제점을 가지고 있다. 본 논문에서는 센서 클러스터에서 CH와 중첩 또는 충돌 없이 액터를 재배치하기 위해 센서신호 공통 중첩영역을 추출하는 기법을 제시한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.83-90
• /
• 1995

The standardization of NGIS emerges as an important subject because of the needs for sharing information and assuring of information inter-operability. The standardization could be developed by refering OSE/RM, which is promoted internationally, that the corresponding national standards are required. The standardization of NGIS, that has been promoting, consists of standardization of national electronic base-map and common data exchange format. The process for standardization of base-map has been taken in the area of feature-attribute code and data modeling. In the area of common data exchange format, we have been accepted the accommodation of international standards as the national standard.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.