• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.10-21
• /
• 2006

The aim in this study is to develop the combined EGR system with a non-thermal plasma reactor for reducing exhaust emissions and improving fuel economy in turbo intercooler ECU common-rail diesel engines. At the first step, in this paper, the characteristics of performance and $NO_x{\cdot}THC$ emissions under four kinds of engine loads are experimentally investigated by using a four-cycle, four-cylinder, direct injection type, water-cooled turbo intercooler ECU common-rail diesel engine with a combined plasma exhaust gas recirculation(EGR) system operating at three kinds of engine speeds. The EGR system is used to reduce $NO_x$ emissions, and the non-thermal plasma reactor and turbo intercooler system are used to reduce THC emissions. The plasma system is a flat-to-flat type reactor operated by a plasma power supply. The fuel is sprayed by pilot and main injections at the variable injection timing between BTDC $15^{\circ}$ and ATDC $1^{\circ}$ according to experimental conditions. It is found that the specific fuel consumption rate with EGR is increased, but the fuel economy is better than that of mechanical injection type diesel engine as compared with the same output. Results show that $NO_x$ emissions are decreased, but THC emissions are increased, as the EGR rate is elevated. $NO_x$ and THC emissions are also slightly decreased as the applied electrical voltage of the non-thermal plasma reactor is elevated. Thus one can conclude that the influence of EGR in $NO_x$ and THC emissions is larger than that of the non-thermal plasma reactor, but THC emissions are greatly influenced by the non-thermal plasma reactor as the EGR rate is elevated.

• Journal of Distribution Science
• /
• v.15 no.8
• /
• pp.15-28
• /
• 2017

Purpose - Many researchers analyze VMI as a supply chain collaboration program to reveal its true value. Most of them focus on the dyadic relationship in two stage supply chain systems. This study examines the effect of VMI when it is applied to the different parts of three stage supply chain systems. Research design, data, and methodology - Based on three stage supply chain, this study compares three different systems including full VMI, partial VMI, and non-VMI by using mathematical models. The performances of three systems are compared with the numerical examples of the proposed supply chain models. Results - The numerical examples reveal that full VMI where the manufacturer controls inventories at all stages outperforms any other systems in terms of the system profit and enables all individual members to gain greater profits than non-VMI. Meanwhile, under partial VMI where VMI is implemented between the wholesaler and retailer, only these two members improve their performances and the manufacturer who does not belong to VMI makes less profit than even under non-VMI. This study also examines the impact of market size and profit margin on the system performance. Conclusions - The result of this study supports the common belief that VMI secures the best result when it is applied to the entire supply chain system. The additional findings from the numerical analysis are discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.51-60
• /
• 2004

Ball-end milling is one of the most common manufacturing processes for the parts with sculptured surface. However, the conventional roughness model is not suitable for the evaluation of surface texture and roughness under highly efficient machining conditions. Therefore, a different approach is needed for the accurate evaluation of machined surface. In this study, a new method, named ‘Ridge method’, is proposed for the effective prediction of the geometrical roughness and the surface topology in ball-end milling. Theoretical analysis of a machined surface texture was performed considering the actual trochoidal trajectories of cutting edge. The characteristic lines of cut remainder are defined as three-types of ‘Ridges’ and their mathematical equations are derived from the surface generation mechanism of ball-end milling process. The predicted results are compared with the results of conventional method. The agreement between the results predicted by the proposed method and the values calculated by the simulation method shows that the analytic equations presented in this paper are useful for evaluating a geometrical surface roughness of ball -end milling process.

• Earthquakes and Structures
• /
• v.5 no.5
• /
• pp.553-570
• /
• 2013

Using of masonry infill as partitions, in flat slab frame buildings is a common practice in many parts of the world. The infill is, generally, not considered in the design and the buildings are designed as bare frames. More of fundamental information in the effect of masomary infill on the seismic performance of RC building frames is in great demand for structural engineers. Therefore the main aim of this research is to evaluate the seismic performance of such buildings without (bare frame) and with various systems of the masonary infill. For this purpose, thirteen three dimensional models are chosen and analyzed by SAP2000 program. In this study the stress strain relation model proposed by Crisafulli for the hysteric behaviour of masonary subjected to cyclic loading is used. The results show that the nonstructural masonary infill can impart significant increase global strength and stiffness of such building frames and can enhance the seismic behaviour of flat slab frame building to large extent depending on infill wall system. As a result great deal of insight has been obtained on seismic response of such flat slab buildings which enable the structural engineer to determine the optimum position of infill wall between the columns.

• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.303-314
• /
• 2018

An original quasi-3D hyperbolic shear deformation theory for simply supported functionally graded plates is proposed in this work. The theory considers both shear deformation and thickness-stretching influences by a hyperbolic distribution of all displacements within the thickness, and respects the stress-free boundary conditions on the upper and lower surfaces of the plate without using any shear correction coefficient. By expressing the shear parts of the in-plane displacements with the integral term, the number of unknowns and equations of motion of the proposed theory is reduced to four as against five in the first shear deformation theory (FSDT) and common quasi-3D theories. Equations of motion are obtained from the Hamilton principle. Analytical solutions for dynamic problems are determined for simply supported plates. Numerical results are presented to check the accuracy of the proposed theory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.559-565
• /
• 2010

In this paper, we present a transformation method of source code from a POSIX (Portable Operating System Interface) based source code into an OSEK/VDX (Offene Systeme und deren Schnittstellen fur die Elektronik in Kraftfahrzeugen/Vehicle Distributed eXecutive) source code. As the electronic parts of automobile systems increase, the use of embedded software in automobile systems is also growing. Accordingly, many electronic systems are designed in automobile system with OSEK/VDX. Otherwise, one of the major problems of embedded software would be portability to other OS's. To enhance the portability and interoperability of embedded software, we propose a source code transformation method from POSIX to OSEK/VDX based on API (Application Programming Interface) translation method. Considering the characteristics of the OSEK/VDX which uses OIL (OSEK/VDX Implementation Language) standard, transformation process is performed with source code transformation and OIL code generation. For the validity of the proposed method, the transformation experiment is given using Micro-C OS II and OSEK/VDX with XC167CI micro-controller.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.888-891
• /
• 2000

Drilling is one of the most important operations in machining industry and usually the most efficient and economical method of cutting a hole in metal. From automobile parts to aircraft components, almost every manufactured product requires that holes are to be drilled for the purpose of assembly, creation of fluid passages, and so on. It is therefore desirable to monitor drill wear and hole quality changes during the hole drilling process. One important aspect in controlling the drilling process is drill wear status monitoring. With the monitoring, we may decide on optimal timing for tool change. The necessity of the detection of tool wear, fracture and the abnormal tool state has been emphasized in the machining process. Accordingly, this paper deals with the cutting characteristics of the hot-rolled high strength steels using common HSS drill. The performance variables include drill wear data obtained from drilling experiments conducted on the workpiece. The results are obtained from monitoring of the cutting force and Acoustic Emission (AE) signals, and from the detection of the abnormal tool state with the computer vision system.

• KIEAE Journal
• /
• v.5 no.4
• /
• pp.25-32
• /
• 2005

In apartment complexes of Korea shared space becomes more and more important since it promotes social relationship among neighbors and also as a ecological point of view. After the Green Building system was introduced in the society, it attracted more attentive as an essential component for sustainable community. Now, it's expected the shared space plan or the community center plan will be a hot issue in the society. Therefore, we could see an aspect of the gradual change related to housing culture in Korea and make a prediction how to develop the shared space as researching domestic leading studies about the 'shared space'. The purpose of this study is to identify the trend of academic achievement as shared spaces. 14 books and 43 studies are searched and each of them are divided into according to the subject. The concept of the shared space was introduced in a holistic moment and the design plans were presented in books in the early 1990's, and total community center it was introduced. The studies are naturally divided into 4 parts as time passed that are characteristics of the block planning in the complex, the needs of the shared space, the actual condition of the using shared space, and the case studies of the shared space. The shared spaces under the structure of the community center are expected to be developed in a more elaborate way to cope with increasingly well-being needs.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.1 no.1
• /
• pp.103-117
• /
• 2000

The manipulations are the main therapheutic procedure of Chuna. Manipulation is the essential procedure of Chuna theraphy. On the basis of touch parts and motion changes, each elementary manipulation is divided into Stimulating Manipulations (reflexional manipulations) and Mobilizing Manipulations. Objectives: This study were advanced so as to know Chinese Chuna Manipulations especially on Herniated Nucleus Pulposus. Methods We Investigated Chinese medicine paper about Chinese Chuna Manipulations on Herniated Nucleus Pulposus between 1996 and 1999. Results. Chinese Chuna theraphy, Pressing Manipulations and Thrusting-Wrenching Manipulations are mostly used on Herniated Nucleus Pulposus, and Chinese Chuna theraphy carrys out Traction, Injection. Chinese medicine. Acupuncture side by side. Conclusions: Chinese Chuna theraphy uses not only Mobilizing Manipulations, but also Stimulating Manipulations whereas Korean Chuna theraphy chiefly uses Mobilizing Manipulations.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.