• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.207-218
• /
• 2017

Improving fuel consumption, particularly that of commercial vehicles, has become a global concern. The reduction in logistics cost has been a key issue in efforts to improve fuel economy and efficiency of transportation equipment. Typical technologies for reducing reduce fuel usage include air resistance reduction technologies, tire rolling resistance technologies, and idle technologies among others. Air resistance technology is a highly effective method that can be easily applied in a short period. As with air resistance technology, several devices involving side skirt, boat tail and gap fairing have been developed based on an analytical 3-D modeling technique for reducing air resistance attributed to the vehicle configuration. The devices were on a 45 feet tractor-trailer and the emission test was done using PEMS equipment. Fuel economy was evaluated by introducing several devices to reduce outer air resistance. The test was conducted by changing the experimental method of SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II test. As a result, air resistance decreased by at least 15 % and fuel economy improved by at least 13 %. This study sought to reduce greenhouse gas and improve fuel economy by applying several devices to a test vehicle to lower air resistance.

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.150-151
• /
• 2008

With the proliferation of vehicles and advancement of Information Technology, the technology of Telematics, which provides valuable services to people by collecting and analyzing the information from drivers, vehicles and Telematics environments (e.g. traffic information, road condition, weather information, etc.), has been a hot research area in IT and automotive recently. As the information technology revolution brings more and more assistance for driver information processing becomes increasing important. Therefore, drivers' workload is very essential factor for safety driving in Telematics environment. For managing drivers' workload effectively, ETRI haven been developing vehicle and driver management system which can collect data from drivers and vehicle in realtime and analyze the data to manage drivers' and vehcles' status since 2007. This technology will apply to commercial vehicle telematics such as texi or truck management system in the future for increasing driving safety. In this presentation, I would like to explain what we had developed so far and discuss future direction.

• Smart Structures and Systems
• /
• v.18 no.3
• /
• pp.405-423
• /
• 2016

In this study, the feasibility of using telecommunication single-mode optical fiber (SMF) as a distributed fiber optic strain and crack sensor was evaluated in concrete pavement monitoring. Tensile tests on various sensors indicated that the $SMF-28e^+$ fiber revealed linear elastic behavior to rupture at approximately 26 N load and 2.6% strain. Six full-scale concrete panels were prepared and tested under truck and three-point loads to quantify the performance of sensors with pulse pre-pump Brillouin optical time domain analysis (PPP-BOTDA). The sensors were protected by precast mortar from brutal action during concrete casting. Once air-cured for 2 hours after initial setting, half a mortar cylinder of 12 mm in diameter ensured that the protected sensors remained functional during and after concrete casting. The strains measured from PPP-BOTDA with a sensitivity coefficient of $5.43{\times}10^{-5}GHz/{\mu}{\varepsilon}$ were validated locally by commercial fiber Bragg grating (FBG) sensors. Unlike the point FBG sensors, the distributed PPP-BOTDA sensors can be utilized to effectively locate multiple cracks. Depending on their layout, the distributed sensors can provide one- or two-dimensional strain fields in pavement panels. The width of both micro and major cracks can be linearly related to the peak strain directly measured with the distributed fiber optic sensor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.1-14
• /
• 2019

In order to minimize problems related to the performance and safety of automobiles, the "Age Limit for Vehicles System" which restricts the age of buses, taxis, and trucks, was implemented in 1973. This contributed to the reduction of accidents and increase of user's service satisfaction. However, the restriction system for trucks was abolished in August 1997 as it was deemed restrictive to economic growth. It is found that one of main causes of traffic accidents such as Changwon Tunnel accident occurred in recent years, is the aging of trucks. Thus, There is a growing need for the management of the age of trucks. In this study, the time when cargo vehicles need to be managed is suggested, by analyzing the safety of cargo vehicles using vehicles inspection data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2021

This paper describes the process of developing a concrete median barrier of SB4 grade with anti-glare function. The development section has a height and width of 1,270mm and 560mm, respectively. A wire mesh is placed in the center of the cross section to improve the protection performance. Collision analysis predicted that this section satisfies the strength and occupant protection performance, and that no damage to the barrier occurs. In the actual collision test, it was confirmed that this section satisfies the strength and occupant protection performance. However, damage was observed on two concrete barrier when the truck crashed. In order to improve the accuracy of the collision analysis of the concrete barrier in the future, it is considered that a study on the model development and continuous collision analysis method for domestic commercial vehicles should be carried out.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.61-69
• /
• 2022

Earthmoving operations account for approximately 25% of construction cost, generally executed prior to the construction of buildings and structures with heavy equipment. For the successful completion of earthwork projects, it is crucial to constantly monitor earthwork equipment (e.g., trucks), estimate productivity, and optimize the construction process and equipment on a construction site. Traditional methods however require time-consuming and painstaking tasks for the manual observations of the ongoing field operations. This study proposed the use of a GPS sensor embedded in a smartphone for the tracking and visualization of equipment locations, which are in turn used for the estimation and simulation of cycle times and production rates of ongoing earthwork. This approach is implemented into a digital platform enabling real-time data collection and simulation, particularly in a 2D (e.g., maps) or 3D (e.g., point clouds) virtual environment where the spatial and temporal flows of trucks are visualized. In the case study, the digital platform is applied for an earthmoving operation at the site development work of commercial factories. The results demonstrate that the production rates of various equipment usage scenarios (e.g., the different numbers of trucks) can be estimated through simulation, and then, the optimal number of tucks for the equipment fleet can be determined, thus supporting the practical potential of real-time sensing and simulation for onsite equipment management.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.319-325
• /
• 2015

High-strength steel has replaced mild steel as the material of choice for truck decks or frames, owing to the growing demand for lightweight vehicles. Although studies on the weld fatigue characteristics of mild steel are available, studies on high-strength steels have been seldom conducted. In this study, firstly, we surveyed a chosen number of approaches and selected the Radaj method, which uses the notch factor approach, as the one suitable for evaluating the fatigue life of commercial vehicles. Secondly, we obtained the S-N curves of HARDOX and ATOS60 steel welds, and the F-N curves of the T-weld and overlapped-weld structures. Thirdly, we acquired a general S-N curve of welded structures made of high-strength steel from the F-N curve, using the notch factor approach. Fourthly, we extracted the weld fatigue characteristics of high-strength steel and incorporated the results in the database of a commercial fatigue program. Finally, we compared the results of the fatigue test and the CAE prediction of the example case, which demonstrated sufficiently good agreement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.1-8
• /
• 2018

This paper describes new communication methods for transmitting torque commands between the vehicle controller that determines the amount of power generation in a range-extended electric vehicle and the engine controller that performs it. Generally, vehicles use CAN communication, but in this case, the hardware and software of the existing engine controller must be modified. For this reason, it is not easy to apply CAN communication to small and medium sized automotive reorganize companies. Therefore, this research presents a pin-pin communication method for applying the existing mass produced engine controller to range-extended electric vehicles. The pin-pin communication method converts the driver's demand torque control map inside an mass produced engine controller into a virtual accelerator opening position according to the target speed and target torque of the engine, and converts this to a voltage signal for the existing mass produced engine controller to recognize it. The virtual accelerator opening positions are mounted in the form of a control map in the vehicle controller through the reverse conversion process in an offline environment and are determined by the engine generating power requirements and engine optimal operating point algorithm. These algorithms and signal conversion circuits for engine torque transmission have been mounted on the vehicle controller to conduct the virtual accelerator opening position conversion process according to the engine target torque and to establish the virtual accelerator voltage signal using the signal converter.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.319-332
• /
• 2004

Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.324-329
• /
• 2015

The primary aim of this study was to investigate biosecurity practices in pig farms and to determine the major risk factors associated with PCV2 infection for a sampled swine population in Korea. To this end, we analyzed data from a cross-sectional study of 296 farrow-to-finish farms, which was conducted between March and September 2014 to explore the prevalence of swine disease at farm level. Face-to-face interviews by on-site visit of trained veterinarians were conducted with the farm owners or managers using a standardized questionnaires with information about basic demographical data and management practices. Farms were classified as negative or positive through the use of infection profiles that combined data on serological testing including PCR antigen test result, antibody titer and sero-conversion pattern at each age category taking into account vaccination status. Data were analyzed using multivariate ordinal logistic regression. Results from this study indicated that biosecurity level of the farms was considered not good given low compliance of the biosecurity programs and facilities in the farm: off-site removal of dead stocks (7%), off-site location of storage facility for incoming feeds (12.6%), off-site pick-up location for finishers (19.3%), restrictions on feed supplier vehicles for farm entrance (19.6%), restriction of finisher trucks entering the farm (22.4%), and restriction on manure disposal trucks entering the farm (26.4%). In the final model (n = 255), allowance of finisher truck driver to the pig unit had increased risk of infection (OR = 2.4, 95% CI 1.22-4.67) whereas farms with a sign forbidding the entrance had decreased risk of infection (OR = 0.19, 95% CI 0.10-0.58). Further comprehensive research with larger sample size is required to better understand the multifactorial characteristic that some predisposing risk factors that were not available in this study. To the best knowledge of the authors, this was the first study to use empirical data to report risk factors associated with PCV2 infection in the Korean pig farms. Results from the current study could be used to decide optimal biosecurity measures to reduce the impact of PCV2 infection to farmers and policy makers.