• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.2
• /
• pp.3-54
• /
• 2014

The Republic of Korea enacted the Air Transport Act in Commercial Law which was entered into force in November, 2011. The Air Transport Act in Korean Commercial Law was established to regulate domestic carriage by air and damages to the third party which occur within the territorial area caused by aircraft operations. There are some problems to be reformed in the Provisions of Korean Commercial Law for the aircraft operator's liability of compensation for damages to the third party caused by aircraft operation as follows. First, the aircraft operator's liability of compensation for damages needs to be improved because it is too low to compensate adequately to the third party damaged owing to the aircraft operation. Therefore, the standard of classifying per aircraft weight is required to be detailed from the current 4-tier into 10-tier and the total limited amount of liability is also in need of being increased to the maximum 7-hundred-million SDR. In addition, the limited amount of liability to the personal damage is necessary to be risen from the present 125,000 SDR to 625,000 SDR according to the recent rate of prices increase. This is the most desirable way to improve the current provisions given the ordinary insurance coverage per one aircraft accident and various specifications of recent aircraft in order to compensate the damaged appropriately. Second, the aircraft operator shall be liable without fault to damages caused by terrorism such as hijacking, attacking an aircraft and utilizing it as means of attack like the 9 11 disaster according to the present Air Transport Act in Korean Commercial Law. Some argue that it is too harsh to aircraft operators and irrational, but given they have also some legal duties of preventing terrorism and in respect of helping the third party damaged, it does not look too harsh or irrational. However, it should be amended into exempting aircraft operator's liability when the terrorism using of an aircraft by well-organized terrorists group happens like 9 11 disaster in view of balancing the interest between the aircraft operator and the third party damaged. Third, considering the large scale of the damage caused by the aircraft operation usually aircraft accident, it is likely that many people damaged can be faced with a financial crisis, and the provision of advance payment for air carrier's liability of compensation also needs to be applied to the case of aircraft operator's liability. Fourth, the aircraft operator now shall be liable to the damages which occur in land or water except air according to the current Air Transport Act of Korean Commercial Law. However, because the damages related to the aircraft operation in air caused by another aircraft operation are not different from those in land or water. Therefore, the term of 'on the surface' should be eliminated in the term of 'third parties on the surface' in order to make the damages by the aircraft operation in air caused by another aircraft operation compensable by Air Transport Act of Korean Commercial Law. It is desired that the Air Transport Act in Commercial Law including the clauses related to the aircraft operator's liability of compensation for damages to the third party be developed continually through the resolutions about its problems mentioned above for compensating the third party damaged appropriately and balancing the interest between the damaged and the aircraft operator.

• Journal of the Korean Geographical Society
• /
• v.36 no.3
• /
• pp.258-277
• /
• 2001

Agricultural Co-operation chain stores were highly the utility of distribution rationalization for commercial distribution by informatisation and by multi-polarizied of large physical distribution center of Inventory intensive type consisted of intensive physical distribution. and transportation of commodities from physical distribution center have act by outsourcing. Therefore, the methods of distribution of commodities of life and agricultural products are distinguished from route distribution and regular time collective distribution. the method of distribution is formated the distribution field b\ulcorner characteristic of commodity. On the other hand, spatial characteristics by sales activities of commodities was clarified by types of stole commodity according to level of paddy agriculture development and level of service industrial employment. But manufactured foodstuffs and miscellaneous goods. that is commodities of life clarified the fact selling that is not influenced by regional type.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.169-171
• /
• 2002

The western route of KEPCO's 765kV transmission line has been tentatively operating as 345kV voltage before commercial operation. After finishing the test operation of 765kV substation in 2002. KEPCO decided to operate the 765kV line for commercial operation. During the applying of 765kV voltage to the transmission line, double circuit transmission line will be operated with two voltage grades of 765kV and 345kV. Because the earthing switch is installed on both end of transmission line, we had estimated the electrostatic induction voltage and electromagnetic induction current before the line energizing in order to confirm the ratings of earthing switch. The induced voltage and current is very important for the maintenance of parallel circuit. This paper describes the simulation study of electrical phenomena such as electrostatic induction voltage from the parallel line and electromagnetic induction current from the parallel circuit. The transmission line model was developed by EMTP (Electro-Magnetic Transient Program).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1627-1636
• /
• 2014

In real-time electricity price environment, the energy management system can provide the significant advantage to the residential, commercial and industrial customers since it can reduce the electricity charge by controlling the load operation effectively in response to time-varying price. However, the earlier studies for load management mainly focus on the residential and commercial customers except for the industrial customers because most of load operations in industrial sector are intimately related with production schedule. So, it is possible that the inappropriate control of loads in industrial sector causes huge economic loss. In this paper, therefore, we propose load control algorithm for factory energy management system(F-EMS) to achieve not only minimizing the electricity charges but also maintaining production efficiency by considering characteristics of load operation and production schedule. Considering characteristics of load operation and production schedule, the proposed load control algorithm can reflect the various characteristics of specific industrial customer and control their loads within the range that the production efficiency is maintained. Simulation results show that the proposed load control algorithm for F-EMS leads to significant reduction in the electricity charges and peak power in industrial sector.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.208-211
• /
• 2003

The western route of KEPCO's 765 kV transmission line has been tentatively operating as 345 kV voltage before commercial operation. KEPCO decided to operate the 765 kV line for commercial operation after completing the test operation of 765 kV substation in 2002. In the process of energizing the line as 765 kV voltage, double circuit transmission line will be operated with two voltage grades of 765 kV and 345 kV. As the earthing switches are installed on both ends of the line, electrostatic induction voltage and electromagnetic induction current were calculated prior to the line energizing in order to confirm the ratings. The induced voltage and current are important for the maintenance of the parallel circuit. This paper presents the simulation results of electrical phenomena such as electrostatic induction voltage and electromagnetic induction current from the parallel line. The transmission line was modeled by EMTP (Electro-Magnetic Transient Program). The simulation results were compared with the measured results at the field.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.443-452
• /
• 2010

COTS system is increasingly seen as one of the main jobs of reuse development. It involves reliability of COTS that might affect the project schedule or the quality of the software being developed and taking action to avoid these risks. The results of the COTS analysis should be documented in the project plan along with an analysis of the attribute and operation. Effective risk management makes it easier to cope with problems and to ensure that these do not lead to unacceptable budget or schedule slippage. This research provides criteria of analysis of risk items to the estimation of process milestone on COTS development.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.4
• /
• pp.1-11
• /
• 2017

This article reviews the recent activities of field testing and application of superconducting fault current limiters (SFCL) based on high-temperature superconductors (HTS). The review particularly focuses on the trends in the field tests in terms of the technical aspects and commercial activities of the SFCLs. Stimulated by the discovery of HTS, numerous research and development activities have been conducted worldwide for SFCLs operating from distribution voltages to transmission voltages. Different types of SFCLs have been developed and field-tested. Consequently, more than 20 field tests and applications have been performed on real grids worldwide while supplying electric power to the customers. These field tests have not only provided the track records of the operation experiences including the problems and maintenance during operation, but also proved their current limiting capabilities against real faults, rendering this new technology highly viable. Through these activities, the following trends in the status of field testing and application are observed. Resistive-type SFCLs with HTS-coated conductors were dominantly used in the most recent field tests. This implies that the resistive type is technically more mature than the other types. Bus-bar coupling and transformer feeders were the major application locations. It is of importance that most of the field applications were conducted as R&D projects. A relevant change from the R&D stage to the application stage is shown as recently deployed SFCLs are expected to be under long-term operation and commercial service. Here, we review the installation of these SFCLs by substation. This review also discusses the recent activities for their commercial applications.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.687-689
• /
• 2000

Molten Carbonate Fuel Cell (MCFC) with high electrical efficiency and low environmental effect has been developed for the commercial application of power generation fields. Recently we have built a 25 kW molten carbonate fuel cell power generation system and tested it. The MCFC system is composed of diverse peripheral units such as reformer, pre-heater, water purifier. electrical loader, gas supplier, and recycling systems. The stack itself was made of 40 cells of $6.000 cm^2$ area each. The stack showed an output of 28.6 kW power and a reliable performance at atmospheric operation. while in pressurized operation the stack showed an output 25.6 kW lower than the atmospheric operation. The reason of lower performance of pressurized operation was caused from a gas cross over shown in few cells in the stack.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.195.1-195.1
• /
• 2012

Korea Aerospace Research Institute has developed an earth observation satellite whose primary mission objective is to provide high resolution electro optical earth images for Geographical Information Systems (GIS) establishment and the applications for environmental, agriculture and ocean monitoring. It was successfully launched into its mission orbit by using a commercial launch vehicle on 18th of May, 2012. This paper describes a series of launch activity at the launch site including its transportation to the launch site. Before conducting the launch site operation, satellite operation plane was prepared. Combining the satellite operation plan and launch vehicle activities, an integrated launch site operation plan and schedule have been drawn up. After arrival of the spacecraft at the launch site, post-ship check out has been conducted. And then it was fuel loaded and integrated with launch vehicle hardware. After completion of final electrical check out, count down procedure was executed. on 18th of May, it was launched into the space and was separated from the launch vehicle as planned. About 3 months of early operation and calibration/validation, now the satellite is conducting its normal mission.

• Korean journal of food and cookery science
• /
• v.21 no.5
• /
• pp.693-702
• /
• 2005

The purpose of this study was to provide useful information for establishing efficient marketing direction by investigating the performance (satisfaction) and importance for the quality of Korean traditional commercial beverages. The subjects were 320 participants (130 males and 190 females) in Daegu and Kyungpook. The importance and satisfaction score of Korean traditional commercial beverages were measured on a five-point Likert scale. The results are summarized as follows. The overall satisfaction score on Korean traditional commercial beverages was 2.96 points. The beverages with the highest satisfaction scores were 'green tea' (3.48 points) 'shickhae' (3.35 points) and 'rice tea' (3.34 points) whereas 'ppongip tea' (2.58 points) 'gugija tea' (2.63 points) and 'gukhwa tea' (2.64 points) scored lowly. From the analysis of the difference between importance and performance of Korean traditional commercial beverages, importance (3.11 points) was rated much higher than performance (3.66 points). In the IPA result, it was important to continuously maintain 'taste', 'hygiene', 'freshness', 'period of circulation', 'wrapping condition' etc. Some items such as 'nutrition', 'safety', 'health', and 'ingredient' did not need intensive care and operation.