• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.211-218
• /
• 2017

The catch performance of the silver-white jig for automatic jigging machine, developed to improve the effectiveness of LED fishing lamp in catching squid, was compared to that of the conventional green jig. The vessels used in this investigation were Haesong-ho (A-vessel), a training vessel of Gangwon State University and Haengbok-ho (B-vessel), a commercial fishing boat. In the case of the A-vessel, five to eight automatic jigging machines were used in the fishing operation with a 31.3 kW LED fishing lamp in summer. As for the B-vessel, fourteen automatic jigging machines were used with a 43.2 kW LED fishing lamp in autumn and winter. The results showed that the catch performance of the silver-white jig was similar to that of the green jig in the case of the A-vessel (p>0.05). However, in the case of the B-vessel, the catch performance of the silver-white jig was superior to that of the green jig in both winter (p<0.05) and autumn (P<0.001). Based on the catch performance results regarding the B-vessel in autumn, it is expected that the annual income increase that can be earned by using the silver-white jig will be KRW 26,385,000.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.131-136
• /
• 2011

In commercial vehicle, sub-frame which equipped in main frame supporting dump deck and oil tanker. This is the main structure for all equipment which including joint function. Sub-frame is made by welding process, this susceptible to deform and crack by its longitudinal size. Also various kind of sub-frame make it difficult to standardization in manufacturing process and exclusive jig is not adapted yet. Frame size is over 6~8m and weight is more than 300kg this make re-work more difficult. If manufacturing company made precise sub-frame, this is not only convenient for customers but also save the company money by reducing the working time. In this study manufacture the sub-frame be suitable for its main function and develop exclusive welding jig for obtain checking fixture function as well.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.203-209
• /
• 2006

This paper described the experimental squid jigging fishery conducted by a commercial fishing vessel in the Northwest Atlantic Ocean from August to October 2005. Author carried out experimental jiggings of 65 times during 57 days by three type of jigs which were pick jig, soft jig and soft luminous jig. The total catch, effort/day and catches/line-day of northern shortfin squid (Illex illecebrosus) were 12,726kg, 35 auto jigging machine and 3.5kg, respectively. Higher CUPE was observed in September, August and October. Catch ratio of pick jig was higher by 57-86% than those of soft jig and soft luminous jig. Higher catch was recorded at the $42^{\circ}55'N,\;62^{\circ}10'W$ with surface temperature ranging $18-21^{\circ}C$. The range of the dorsal mantle length was from 13.5cm to 23.0cm with average 17.2cm for female and from 13.0cm to 20.0cm with average 17.0cm for male. Sex ratio showed 55.4% of female.

• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.23-30
• /
• 2020

Laser Assisted Thermo-Compression Bonding (LATCB) has been proposed to improve the "chip tilt due to the difference in solder bump height" that occurs during the conventional semiconductor chip bonding process. The bonding module of the LATCB system has used a piezoelectric actuator to control the inclination of the compression jig on a micro scale, and the piezoelectric actuator has been directly coupled to the compression jig to minimize the assembly tolerance of the compression jig. However, this structure generates a lateral force in the piezoelectric actuator when the compression jig is tilted, and the stacked piezoelectric element vulnerable to the lateral force has a risk of failure. In this paper, the optimal design of the flexure hinge was performed to minimize the lateral force generated in the piezoelectric actuator when the compression jig is tilted by using the displacement difference of the piezoelectric actuator in the bonding module for LATCB. The design variables of the flexure hinge were defined as the hinge height, the minimum diameter, and the notch radius. And the effect of the change of each variable on the stress generated in the flexible hinge and the lateral force acting on the piezoelectric actuator was analyzed. Also, optimization was carried out using commercial structural analysis software. As a result, when the displacement difference between the piezoelectric actuators is the maximum (90um), the maximum stress generated in the flexible hinge is 11.5% of the elastic limit of the hinge material, and the lateral force acting on the piezoelectric actuator is less than 1N.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.749-756
• /
• 1998

TiC-Ni and TiC-Ni-Mo cermet powders were produced by Self-propagating High temperature Synthesis (SHS) process. The cooling rate of synthesized powders were controlled by using the V-shaped copper jig and the carbide size decreased with increasing the cooling rate I. e decreasing the width of copper jig Round shape carbide particles were produced after SHS reaction in TiC-Ni as well as TiC-Ni-Mo powders. Local segregation of Mo rich phases was observed in SHS powder of TiC-Ni-Mo and the uneven dis-triobution of Mo promoted the faster growth rate of carbide particles during sintering compared to the same composition specimen with commercial TiC powder. Howogeneous microstructure of TiC-Ni-Mo cermet was obtained when the elemental Mo powder was mixed with the SHS powder of TiC-Ni.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.218-223
• /
• 2002

The void volume fraction of cables is one of the effective parameters to characterize the joints of superconducting magnet. Because electrical resistance and cooling stability in the CICC (Cable-in-Conduit Conductors) joint are governed by the void volume fraction, it should be controlled constantly in the termination of cable. The change of cross-section shape in the cable was fecund during the unidirectional compaction of terminal sleeve. The non-uniform thickness of the sleeve after compaction is expected because the loading is not taxi-symmetric, and the plastic flow is also not axi-symmetric. The CICC was compacted from 45% void volume fraction to 15% by using two-piece compaction jig, which could be pressed mini-directionally. Commercial code, ABAQUS, was used to analyze the plastic flow in the sleeve during the unidirectional compaction. The increment of radius of curvature of compaction jig could minimize the change of the deformed shape of cables. The calculated results were agreed with the experimental observations.

• Fisheries and Aquatic Sciences
• /
• v.26 no.5
• /
• pp.336-343
• /
• 2023

This study aimed to know the response of deep-sea squid Sthenoteuthis oualaniensis to the light colors of the artificial bait. This experiment used the commercial artificial flashlight baits commonly sold in the fishing shop. The bait has several different light color combinations. The light colors were modified into several light colors by inactivating certain colors and used as treatments. The study is expected to be able to find flashlight bait's most effective color for squid fishing. We applied red-green, green, blue, and commercial bait lights in this study. Each treatment has 3 replications. The effect was expressed as the amount of squid caught. Data were analyzed by one-way analysis of variance. Results showed a significant effect on the number of squid catches. There was significantly different squid catches among the treatments. It indicates that this artificial flashlight bait could be developed to maximize squid catches. This finding can be used for the local fishermen's income and the squid fisheries development.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.61-66
• /
• 2020

Recently, a variety of electric anesthetics devices have been developed and used in clinical practice to reduce the fatigue of the operator during local anesthesia for dental procedures and to compensate for the disadvantages of manual anesthesia device. In this electric anesthesia injection device, the accurate and constant delivery of pressure for drug infusion is a very important performance factor. In order to evaluate the accuracy of the transfer pressure, a small pressure gauge using a load cell is often used, but since the elastic body inside the load cell may not be able to accommodate a sufficient displacement, an error may occur when evaluating pressure performance. For these reasons, in this study, we proposed and evaluated a silicon-chrome steel (Si-Cr steel) spring jig that can accommodate relatively large displacements that can be used when evaluating the performance of a pressure-controlled pressure application device using a load cell type pressure gauge. As a result of the pressure transmissibility test and repeated measurement results using a commercial dental anesthesia injection device, a more stable result was obtained when using a spring jig, and it was confirmed that the frequency of abnormally high measurement was reduced.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.69-76
• /
• 2007

The body of an excavator, one sort of the construction equipment, consists of mainframe part, track frame part, boom part and arm part. The all parts are manufactured in the body welding operation. The scheduling in the body welding operation of a construction equipment manufacturing is to take all the various constraints into consideration. The offset time, due date, daily capacity of operations, daily jig's capacity, precedence relation, outsourcing, alternative resource and all of the shop floor environment should be considered. An APS(Advanced Planning & Scheduling) system is a proper and efficient system in such circumstance. In this paper, we present an APS system, the optimal scheduling system for the construction equipment manufacturing specifically for the body welding operation, using ILOG Solver/Scheduler. ILOG Solver/Scheduler is a general purposed commercial software which supports to find a feasible or optimal solution using object oriented technique and constraints satisfaction programming, given constraints and objectives.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.2
• /
• pp.325-336
• /
• 2023

With the development of autonomous driving technology, the number of external contact sensors mounted on vehicles is increasing, and the importance is also rising. The vehicular ultrasonic sensor uses the LIN protocol in the form of a bus topology and reports a status message about its surroundings through the vehicle's internal network. Since ultrasonic sensors are vulnerable to various threats due to poor security protocols, physical testing on actual vehicle is needed. Therefore, this paper developed a LIN-CAN co-analysis testbed with a jig for location-specific distance test to examine the operational relation between LIN and CAN caused by ultrasonic sensors.