• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.652-659
• /
• 2011

Due to overuse of commercial network systems such as bluetooth and WI-FI, the problems of frequency interruption and line-crossing may arise. For this reason, wireless communication frequency ISM 2.4GHz, a recently adapted concept in Korea which is employeed by RF-CBTC system, is predicted not to have guarantee for outstanding and continuous performance. Therefore in this study, considering these problems, 5GHz capacity wireless Lans with international standard 802.11a/b/g applied were installed in the underground urban transit areas and it was proved that these lans exceeded the performance level of 2.4GHz with international standard 802.11b which is being introduced in the nation. In addition, it was verified through carrying out an application test that the communication condition was stable in a running train with high speed in the tunnel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.269-271
• /
• 2004

In this study, on-line measuring system were developed to verify performances and characteristics of electric braking system that is used in KTX(Korea Train eXpress) synthetically and efficiently Because KTX is commercial vehicle, effective measurement and evaluation of measuring signals were performed beyond the range of change for equipment components. KRRI(Korea Railroad Research Institute) described about running-braking measuring program, running-braking backup program and running-braking analysis program that were developed using a software called LabVIEW in this paper. Also, we analyzed the characteristics comparing experimental values with design values about braking distance, braking time, negative acceleration and braking effort in rheostatic braking and regenerative braking. In result, main performances and characteristics for electric braking system in KTX were verified.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.374-390
• /
• 2004

In this paper, I illustrate the situations and problems rail industry is faced with. The rail industry has been suffering deficiency in investment with low technical level. Lacks of strategic marketing plans and low competitiveness in the industry led to a small portion of modal share, estimated at 12.6% in 2001(person base). Recently, rail industry has caught up with the current flow of changes. For example, a prototype of Korea high speed train had been manufactured to be successfully tested on commercial track. And the amount of rail investment increased gradually. The rail industry of EU nations, America, Japan reveals good outcomes, which keeps the balance in the black thanks to growth of investment in rail and high technical level. I have come up with some ideas for improvement, which I believe will be helpful to lead the rail industry. First, I suggest the upbringing of rail industry and technology on a national level. Second, expanding the rail network with the rail modernization. Lastly, I think it is crucial to establish a law and institution before we advance into overseas markets.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.119-127
• /
• 2011

본 논문은 장거리 터널 내에서 운송체의 고속운행에 의해 발생한 유동을 해석하기 위한 격자 기법 개발에 관한 내용이다. 수십 km의 터널 시스템을 3차원으로 해석하기 위해서는 많은 수의 격자가 요구된다. 그러나 전체 터널 시스템을 3차원으로 계산한다는 것은 비효율적이다. 그리하여 본 논문에서 계산의 효율성을 위해 터널 내 유동장에 영향을 크게 주는 달리는 운송체 주위, 정거장과 환기구는 3차원으로 격자를 구성하였고 그 외의 직전 터널 구간은 1차원 격자로 구성하였다. 터널 내의 유동은 열차가 달릴 때 생성되는 열차 주위의 유동에 의해 결정된다. 그러므로 열차 주위에는 격자를 조밀하게 생성시켜 주었다. 그리고 이 격자는 열차가 이동할 때 함께 움직이도록 하여 격자의 질을 유지하게 하였다. 열차의 운행 속도는 가속, 등속, 감속의 3단계로 구분하였다. 이와 같은 장거리 터널 내 비정상 고속 운송체 유동을 해석하기 위해 상용 소프트웨어인 Ansys vr. 12.0의 UDFs(User-Defined Functions) 기능을 사용하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.522-529
• /
• 2005

The commercial service of KTX from April 1st 2004 has realized that whole country has shrunk into half-day life zone and it opened the times of speed. However, some technical problems unexpected before service have been raised and, among them, the noise generation at train passing was claimed by the residents living nearby the track and it is often publicized by the broadcastings and newspapers. In case where the residential area is close to the track, the installation of noise barrier at trackside is the general measures for noise reduction on bridge section and earthwork section. In case of KTX project, such measures were actually taken without any exception; however, the noise level is still high. In this study, analysis for the reason of higher noise level in spite of which the noise barriers are being installed was carried out, the sample of insulation material effective for noise barrier was manufactured and the performance of the insulation material was evaluated to verify its effectiveness

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1093-1100
• /
• 2014

본 논문의 목적은 알루미늄 압출재와 샌드위치 복합재를 사용한 초고속 자기부상 열차의 하이브리드 차체 경량화 설계를 제안하는 것이다. 샌드위치 복합재는 무게 감소를 위해 2차 부재인 루프에 적용되었다. 용접에 의한 샌드위치 복합재 루프와 알루미늄 압출재 사이드 프레임과 접합시키기 위해 샌드위치 복합재 네 옆면에 가이드 알루미늄 프레임을 갖도록 고안하였다. 가이드 알루미늄 프레임의 체결력은 3점 굽힘 시험을 통해 검증하였으며, 차체의 구조 안전성 및 충돌 안전도는 상용 유한요소해석프로그램을 이용하여 철도안전법에 따라 평가하고 검증하였다. 연구결과, 알루미늄 압출재와 샌드위치 복합재로 이루어진 하이브리드 차체는 알루미늄 압출재로만 이루어진 차체에 비해 무게 절감 효과와 향상된 구조 성능을 얻을 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1888-1893
• /
• 2011

Considering the dynamic performance and stability of railroad vehicles has begun to grab the attention because of developing the high speed train recently. A development based on an analysis of dynamics and verification has to be required to study the stability of vehicle performance. Several ways of analysis were using the look-up table to apply the wheel-rail contact characteristics quickly, whereas there is a constraint of the wheelset lateral displacement. In this study, an development of searching the wheel-rail contact position has been provided. The 2-point contact between wheel and rail during the driving condition can be calculated by numerical analysis. Moreover, a reliability is verified by comparing the result with a commercial program.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.375-379
• /
• 2004

The purpose of this study is to analyze the evolution of mobility after the commercial opening of french TGV through an examination on the precedent studies. The result of this study is as follows: Firstly, the TGV is competitive against the airplanes and automobiles within the 2 or 3 hours' service area, especially in the business trip markets. But in the recreational trips over this service area, 3 or 4 hours, the TGV remains as an important mode of transportation. Secondly, in a range within approximately 200 km, 1 hour by TGV, the french high speed train is not competitive against the automobiles by the lack of flexibility and commodity which are normally providing by the automobiles. This study shows the importance of permanent monitoring system on the KTX travellers' behavior to strengthen the market share of KTX.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.25-28
• /
• 2005

The interior noise of KTX in tunnel is becoming the problem since the commercial operating in April 2004. The major sources of interior noise for High speed train ate known as the aerodynamic noise and rolling noise generally. We measure the noise and vibration inside KTX in tunnel in order to find the cause of the interior noise of KTX. The analysis results show that the interior noise of KTX in tunnel with concrete track is increased sharply by a low frequency below 80Hz that is the natural frequency of the KTX carbody. We know that the booming noise inside KTX in tunnel with concrete track is generated by aerodynamic noise outside ganqway and rolling noise at the carbody natural frequency.

• 시스템엔지니어링학술지
• /
• 제7권2호
• /
• pp.7-11
• /
• 2011

A high-speed railway system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as rolling-stock, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Systems engineering technology development project for Korea next generation High-speed Electric Multiple Unit (HEMU) system in progress is a national large system development project that is not only a large-size and complex but also multi-disciplinary in nature. Therefore, all stakeholders must understand and share the functional and performance requirements of HEMU throughout its life-cycle phases. Also in the test and evaluation phase, all systems requirements must be verified. In 2011, the prototype train manufacturing will be completed. It will do test run on the commercial line and all systems requirements are verified until 2012. For the system verification, the test and evaluation process have to be established before the test trial run. Using a systems engineering tool, the system design database(SDD) with requirements traceability and development process management in the course of the development have to be established. This paper represents the test and evaluation process development based on the SEMP(Systems Engineering Management Plan) developed in the design stage. The test and evaluation process is refined and updated in comparison to the design stage one. The test and evaluation process consists of procedure, test and evaluation method and schedule. So through this process, it is defined that each systems requirements is verified on which test and about what time.