• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.440-449
• /
• 2008

This paper deals with a method calculating various hull form parameters which are required in numerical analysis for ship performance such as motion, maneuverability, resistance and propulsion, etc. After the hull form is designed, before the model tests the ship's performances are evaluated by various analysis tools in which the hull form parameters are used with many kinds of forms aside from offset data. Here, The hull form parameters characterize the properties of hull form and contain positional, differential and integral information implicitly. Generally, the commercial CAD-system has not functions enough for supporting these form parameters and therefore each shipyard uses its own in-house analysis program as well as commercial analysis software. To overcome these limitations, modules for supporting these analysis programs have developed. The modules contain cubic composite spline cure using local curve fairing, intersect algorithm, Gaussian integral, and other geometric techniques needed in calculating hull form parameters. Using our analysis-supporting modules, a complex hull form can be remodeled exactly to the hull form designed by CAD-system and any hull form parameter required in various performance analyses can be calculated.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.182-188
• /
• 1996

선형 설계는 concurrent ship design의 첫단계로서, 조선 CIM 시스템 구축을 위해 매우 중요하다. 본 논문에서는 이러한 인식하에 CIM 개념에 입각한 초기 설계 단계에서의 선형 설계 업무와 기능에 대하여 정리하였다. 그리고, 상용 3D-CAD 시스템을 이용한 선형 설계 시스템(DWHULL)을 개발하였다. 결론 부에서는 향후 개발 방향 및 시스템 보완 사항을 제시하였다.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.57-63
• /
• 2004

Various propulsion systems, applicable for a G/T 47,000 class mid-size cruise ship, are discussed and a comparative study on stern forms and hull resistance characteristics is carried out, in relation to these propulsion systems. Based on shipyard production logs on similar cruise ships, a reference hull form of a single shaft propulsion system with center-skeg, is generated. Then two new stern hull forms are derived by using a hull transform technique: consisting of one stern form using a twin-skeg system and the other using the Azipod system. Using a CFD-based commercial flaw analysis program, WAVIS (WAve and VIScous flaw analysis system for hull form development), various hydrodynamic characteristics, including wave profiles and ship hull resistance, are compared for three hull forms.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.451-458
• /
• 2007

A preliminary design approach for superyachts is introduced. The state-of-the-arts of superyachts is investigated and their characteristics are indirectly examined by analyzing the data collected from built vessels. The analysis of data provides a guideline for the establishment of an preliminary hull form of a superyacht. The rules and regulations governing the design and construction of superyachts are collected and considered. A modeling approach for prompt and efficient design is also introduced. A sample hull form of a selected superyacht is constructed using commercial design packages not only to produce a hull form but to analyze the hydrostatic and hydrodynamic performances of the constructed vessel. Various visualization techniques are considered as an efficient tool for design verification.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4726-4732
• /
• 2013

플레저 보트 선체는 주로 비강도가 큰 FRP로 제작되고 있으나 2000년대에 들어오면서 FRP 선체에 대한 환경오염 및 해양안전에 관한 법적 규제가 강화되고 있어 FRP가 선체재료로서의 활용도가 감소되고 있다. 폴리에틸렌 선체는 FRP 선체의 단점을 보완하면서 가격도 염가여서 차세대 플레저 보트 선체 재료로 거론되고 있다. 개발 폴리에틸렌 보트의 최종 선형은 개발 보트를 둘러싸고 있는 설계 환경과 개념을 분석한 결과 도시적 이미지의 샤프한 선형이었다. 또한, 선형 설계에 필요한 외형 주요 치수는 기존의 실적선을 기초로 결정한 결과, 전장 5.9m, 빔 2.3m, 형심 1.3m 흘수 0.6m이었다. 개발 보트에 대한 선형 디자인한 후 Orca 3D로 엔진 출력을 예측한 결과 개발 보트는 최대속도 30노트에 대하여는 60kW의 엔진이 필요하다. 한편, 활주상태에서 최소 총저항을 나타내는 엔진출력은 28.5kW이고 선속은 19노트로서 설계속도 25노트보다 낮은 속도에서 운전되어져야 보트를 경제적으로 운영할 수 있다.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.82-87
• /
• 2006

An approach to model a high-speed monohull vessel is introduced. The high-speed monohull form belonging to the category of multihull is drawing new attention, due to the rapidly growing trend of fast passenger ships and military purpose. Multihull forms are much thinner in their overall shape, compared to those of the conventional commercial vessels. Moreover, the parent hull forms are not readily obtainable when a new design is intended, which makes it hard to perform various technical calculations in terms of hull optimization, hydrodynamic computation, structural design, and so forth. In this paper, a parametric technique is used to design a high-speed hull form. To model a hull form, NURBS (Non Uniform Rational B-Spline) representation is used. The goal of research is to provide a fast and convenient tool to design an initial hull form with fewer parameters available in the early design stage. The technique employed in this paper will be applied to the design of multihull forms, such as catamaran, trimaran, and semi-swath.

• 대한조선학회지
• /
• 제1권1호
• /
• pp.9-16
• /
• 1964

As a pre-study for researches on powering characteristics of straight-framed V-bottom hull forms for usual commercial vessels, practicability of such a hull is investigated from viewpoints of over-all ship economy. For this purpose, a trawler hull of straight-elements with double chines, SV(T)-1, similar to Prof. Nevitt's W-8 in size and hull form coefficients was designed and tested at the SNU Ship Model Towing Tank for resistance measurements. The result is given in Fig.3 together with those of W-8 and other equivalent hulls of double curvature, such as FAO 135a-173, Doust and Takgi. The curves of the latters are reproduction of Prof. Nevitt's analysis, and given for comparison purpose. With in speed range of $9.0{\sim}10.5$ konts the resistance coefficients of SV(T)-1 are $18{\sim}25%$ higher than those of W-8, and $5{\sim}20%$ and $12{\sim}14%$ higher than those of FAO 135a-173 and Doust respectively. SV(T)-1, however, is slightly superior in resistance characteristics than Takagi's equivalent hull within the speed range. On the other hand, an equation for reduction rates of hull construction cost required to compensate for propulsion power increase in straight-elements hulls was derived from the definition of the economic efficiency of commercial vessels. The solution of the equation is given in Fig.4 graphically, from which it is known that $10{\sim}20%$ increase in propulsion power can be compensated by $8{\sim}16%$ reduction in hull construction cost. Considering simplicity and less equipments required in construction of straight -elements hulls, the author does argue for attainability of the above reduction rates in hull construction cost. Consequently, it is concluded that there is clear feasibility to adopt straight-elements hulls for usual commercial vessels of medium and small-size. And a further research will be done to obtain reliable data for chine shapes having good flowliness with the flow around ships depending on ship's size and speed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.9-14
• /
• 2000

Computational methods can be classified roughly into two parts: one is the methods based on a potential flow theory, and the other is numerical solvers(CFD) based on Navier-Stockes equation. Methods based on a potential theory are more effective than CFD when the free surface effect is considered. Especially Rankine source method seems to become widespread for simulations of wave making problems. For computations of viscous flow problems, CFD techniques have rapidly been developed and have shown many successful results in the viscous flow calculation. Present paper introduces a computational system 'WAVIS' which includes a pre-processor, potential ant viscous flow solvers and a post-processor. To validate the system, the calculated results for modem commercial hull forms are compared with measurements. It is found that the results from the system are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.1-10
• /
• 2003

It is important to understand the flow characteristics such as wave and wake development around a ship for the design of the hull forms with better resistance and propulsive performance. The experimental results explicating the local flow characteristics are also invaluable for validation of the physical and numerical modeling of CFD codes, which are recently gaining acknowledgements as efficient tools for hull form evaluation This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138K LNG Carrier (KLNG) model with propeller and rudder. The results contained in this paper can provide the valuable information on the effect of propeller and rudder on stern flow characteristics of the modern commercial hull form, furthermore, the present experimental data will provide important database for CFO validation.

• Journal of Ship and Ocean Technology
• /
• 제4권3호
• /
• pp.33-45
• /
• 2000

A computational system for wave and viscous flow analysis (WAVIS) has been developed. The system includes a pre-processor, flow solvers and a post-processor. The pre-processor is composed of full form presentation, surface mesh and field grid generation. The flow solvers are for potential and viscous flow calculation. The post-processor has graphic utility for result analysis. All the programs are integrated in a GUI-launcher package. To validate the developed CFD programs of WAVIS, the calculated results for modern commercial hull forms are compared with measurements. It is found that the results from WAVIS are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.