• Journal of the Korean Institute of Educational Facilities
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2002

The main objective of this research is to develop an experimental educational facility management information system that will be used for maintaining existing educational facilities in the elementary, junior high, and high schools. The development is based on the nationwide development plan of the education administration information system. The system developed is accomplished by use of Map-application Information System(MAPIS), an applied commercial software that combines Geographic Information System(GIS) with existing Information and Communication Technologies(ICT) such as Database system, Multimedia methodology, and Internet system. In order to figure out the features to be improved in the system developed, the research interviewed the educational facilities management in the Ministry of Education and P Local Education Authority. The authors suggest the functional improvement of the system based on the interview results.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3879-3891
• /
• 2021

A heat pipe residual heat removal system is proposed to be incorporated into the reactor driven subcritical (RDS) facility, which has been proposed by MIT Nuclear Reactor Laboratory for testing and demonstrating the Fluoride-salt-cooled High-temperature Reactor (FHR). It aims to reduce the risk of the system operation after the shutdown of the facility. One of the main components of the system is an air-cooled heat pipe heat exchanger. The alkali-metal high-temperature heat pipe was designed to meet the operation temperature and residual heat removal requirement of the facility. The heat pipe model developed in the previous work was adopted to simulate the designed heat pipe and assess the heat transport capability. 3D numerical simulation of the subcritical facility active zone was performed by the commercial CFD software STAR CCM + to investigate the operation characteristics of this proposed system. The thermal resistance network of the heat pipe was built and incorporated into the CFD model. The nominal condition, partial loss of air flow accident and partial heat pipe failure accident were simulated and analyzed. The results show that the residual heat removal system can provide sufficient cooling of the subcritical facility with a remarkable safety margin. The heat pipe can work under the recommended operation temperature range and the heat flux is below all thermal limits. The facility peak temperature is also lower than the safety limits.

• Korean Institute of Interior Design Journal
• /
• v.26 no.3
• /
• pp.101-112
• /
• 2017

Based on an analysis of the characteristics of "Ecute" of the East Japan Railway Company (JR East) that planned the world's first large scale commercial facilities inside a ticket gate (paid-area including waiting room and platforms), the present study proposes a brand development of commercial facilities inside aged railway stations, where only basic railway business have been provided focusing on passenger transportation, by renewing the definition of railway commercial facilities and presenting a detailed planning and the direction of the operation system. A list of practical tasks that can be carried out in academia, planning and operation / management to facilitate the revitalization of the use of commercial facilities inside railway stations are as follows: 1) the setting of a wide scope for the revitalization of railway commercial facilities around the railway station focusing on private-funded stations in addition to existing stations; a setup of the direct scope of commercial development in the practical railway operation for passengers and stations in terms of external research, and a corresponding shift in thinking in terms of internal research 2) development of under used spaces such as the transfer area (Gongdeok Seoul Wangsimri Station are first target stations where more than four subway lines intersect) 3) brand establishment through improvement strategies for image and symbolism specialized for railway stations 4) rent of suitable business stores and layout of commercial facilities by analysis of passenger move pattern 5) development of commercial facilities which can attract customers by displaying various products, as well as finding a way to develop them in to a base facility that connects to local infrastructures 6) providing advertisement and management system for continual maintenance, and 7) brand specialization through unique storytelling and design plan that stimulates sensibility. The above study results can be utilized as a starting point for design brand awareness about commercial facilities in railway stations in Korea, which can be developed further to improve station image and passenger convenience, as well as to increase the revenue of railway businesses.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.72-76
• /
• 2009

A peak cooling and heating load($kW/m^2$) and annual energy($kWh/m^2{\cdot}yr$) have been simulated for a special greenhouse located near Seoul. The special facility was designed for living plant and butterfly with many visitors. The design conditions for the facility have been discussed with the designer and simulated with the weather and building conditions. The load and energy simulation was done by TRNSYS 15 based on IPMVP 4.4.2.'s simulation requirement. The results have been shown in terms of area($kW/m^2$) and volume load and energy index($kWh/m^2{\cdot}yr$). Considering the higher height of the facility, The results came out reasonably comparing the index of a typical commercial building signed as $462kWh/m^2{\cdot}yr$.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.733-743
• /
• 2016

The purpose of this study is to present a rational depreciation method for a pyroprocess cost calculation. Toward this end, the so-called advanced decelerated depreciation method (ADDM) was developed that complements the limitations of the existing depreciation methods such as the straight-line method and fixed percentage of declining-balance method. ADDM was used to show the trend of the direct material cost and direct labor cost compared to the straight-line or fixed percentage of the declining-balance methods that are often used today. As a result, it was demonstrated that the depreciation cost of the ADDM, which assumed a pyroprocess facility's life period to be 40 years with a deceleration rate of 5%, takes up 4.14% and 27.74% of the pyroprocess unit cost ($781/kg heavy metal) in the $1^{st}$ and final years, respectively. In other words, it was found that the ADDM can cost the pyroprocess facility's capital investment rationally every year. Finally, ADDM's validity was verified by confirming that the sum of the depreciation cost by year, and the sum of the purchasing cost of the building and equipment, are the same.

• Journal of the Korean Institute of Educational Facilities
• /
• v.25 no.1
• /
• pp.3-12
• /
• 2018

Educational facilities are more uncertain about maintenance costs due to their comprehensive and long life-cycle compared to commercial buildings. In addition, maintenance of the existing post management system can not maintain the original function of education facilities continuously and economically. In order to overcome this problem, it is necessary to analyze the repair and replacement cost for the uncertainty factor in maintenance. This study propose a model to determine repair and maintenance cost and cycle of educational facility based on probabilistic estimation concept. For the analysis, Monte Carlo simulation, a probabilistic analysis method, was applied based on the repair and maintenance history data of the educational facilities in Florida. The results of this study can be used as a guideline for quantitative facility management and facility management research.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.478-487
• /
• 2018

Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for pyroprocessing and found that existing facilities are manually operated; therefore, their applications have been limited to laboratory scale because of low productivity and safety concerns. To extend the pyroprocessing technology to a commercial scale, the facility, including all the processing equipment and the material-handling devices, should be enhanced in view of automation. In an automated pyroprocessing facility, a supervised control system is needed to handle and manage material flow and associated operations. This article provides a preliminary design of the supervising system for pyroprocessing. In particular, a manufacturing execution system intended for an automated pyroprocessing facility, named Pyroprocessing Execution System, is proposed, by which the overall production process is automated via systematic collaboration with a planning system and a control system. Moreover, a simulation-based prototype system is presented to illustrate the operability of the proposed Pyroprocessing Execution System, and a simulation study to demonstrate the interoperability of the material-handling equipment with processing equipment is also provided.

• Journal of the Korean Institute of Educational Facilities
• /
• v.28 no.6
• /
• pp.15-28
• /
• 2021

This study aims to propose a hypothetical urban neighborhood, HanGyo-dong, which is a model for understanding the relationship between the neighborhood change and educational facilities. Three issue layers of the model derived from preceding case studies are: establishment, relocation and redevelopment of educational facilities; formation and redevelopment of adjacent residential areas; and growth of neighborhood commercial cores. The neighborhood changes observed through HanGyo-dong include (1) the formation of educational base and commercial activities along the stream, (2) the growth of student and intellectual community and the installment of public transportation nodes, and (3) the relocation of schools and hospitals followed by a series of redevelopments of single family house into multi-family housing of low-rise residence and high rise apartment complex. The findings call for the collaborative practice of educational administration and neighborhood planning regarding how educational facilities, which were the tool for urban expansion policy, will contribute to the development of the neighborhood's identity as a localized hub.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.262-268
• /
• 1996

In Korea, the health authorities and food industry emphasize the need of sanitary food production, which in mainly resulted from the recent growing of consumer's interest in the safety of food. For the reason, development of a new alternative technology to chemicals, currently used for decontamination and disinfestation, has become and urgent task in the domestic and worldwide food industry. Furthermore, the improvement of quality and manufacturing process of processed food is a requisite for winning the competition in export fields. Irradiation technology being practically applicable in the food industry has been well established on the basis of more than 40 years of R&D work in the fields of the increasing availability of food-stuffs, sanitary food production and quarantine treatment in the food trade. The wholesomeness of irradiation foods has been officially approved in 38 countries, of which 30 countries are commercially utilizing food irradiation technology. The first commercial irradiator in Korea(18.5PBq:500k{TEX}$Ci^{60}${/TEX} Co, max. cap; 4MCi) was established at Yeoju-gur, Kyung Ki-do with the technical assistance of Korea Atomic Energy Research Institute in June 1987. As of 1996, thirteen irradiated food groups (over 25 items)have been domestically approved for human consumption and an industrial irradiation facility is also available. However, the domestically approved for human consumption and an industrial irradiation facility is also available. However, the promotion of consumer acceptance to toward ir-radiated foods is considered as a confronted subject to be studied for a commercial utilization.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.57-66
• /
• 2013

The needs for reusable 3D visualization tool has been being raised in various industries. Especially in the defense modeling and simulation (M&S) domain, there are abundant researches about reusable and interoperable visualization system, since it has a critical role to the efficient decision making by offering diverse validation and analyzing processes. To facilitate the effectiveness, states-of-the-arts M&S systems are applying VR (Virtual Reality) or AR (Augmented Reality) technologies. To reduce the work burden authors design a collaborative visualization environment based on a commercial game engine Unity3D. We define the requirements of the warfare simulation by analyzing pros and cons of existing tools and engines such as SIMDIS or Vega, and apply functionalities of the commercial game engine to satisfy the requirements. A prototype has been implemented as the collaborative visualization environment of iCAVE at KAIST, which is a facility for immersive virtual environment. The facility is intraoperative with smart devices.