• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.8-14
• /
• 2016

Increasing concerns of environment need to make change furniture field to more environmentally friendly approach, such as reuse of by-products from wooden products. As it is, the methods of recycling wood for industrial purposes have the advantage of productivity and adaptability. However, the industrial way is required a certain production facility of processing wooden by-products and has possible hygienic problems due to contaminated sources. Many designers have developed their own methods for reuse of wood in unique and artistic ways. Even so, because of confined sources, it could be not enough supply. Therefore, I developed the design methodology utilizing wooden by-products from S Design Company to relieve former ways' problems. The design suggestion took materials from a safe and abundant source. The wooden leftover pieces were connected together with epoxy clay, so previous process traces of furniture are remained as a decorative factor. Moreover, the synthesized material was able to be processed by ordinary woodworking facilities without additional installations. In doing so, console table focused on a commercial purpose and dining table for an artistic objective were successfully fabricated as final suggestions. In consideration of the proposal using wooden furniture leftovers, diverse recycling designs should be investigated for future reference.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.113-124
• /
• 2012

Reliable estimation of energy load inside the greenhouse and the selection of cooling and heating facilities are very important preceding factors to save energy as well as initial and maintenance costs of operating a greenhouse. Recently, building energy simulation (BES) technique to simulate a model similar to the actual conditions through a variety of dynamic simulation methods, and predict and analyze the flow of energy is being actively introduced and developed. As a fundamental research to apply the BES technique which is mainly used for analysis of general buildings, to greenhouse, this research designed four types of naturally-ventilated greenhouses using one of commercial programs, TRNSYS, and then compared and analyzed their energy load properties, by applying meteorological data collected from six regions in Korea. When comparing the greenhouse load of each region depending on latitude and topographical characteristics through simulation, Chuncheon had nearly 9~49 % higher heating load per year than other regions, but its annual cooling load was the reverse to it. Except for Jeju, 1-2W type greenhouses in five regions showed about 17 % higher heating load than a widespan type greenhouse, and 1-2W type greenhouses in Chuncheon, Suwon, Cheongju, Daegu, Cheonju and Jeju had 23 %, 20 %, 17 %, 16 %, 18 % and 20 % higher cooling load respectively than a wide span-type one. Glasshouse and vinyl greenhouse showed 8~11 % and 10~12 % differences respectively in heating load, while 2~10 % and 7~10 % differences in cooling load respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.331-338
• /
• 2008

Ultrasonic testing for welds is widely used to ensure the integrity of facilities in NPPs. Automated ultrasonic testing(AUT) is more consistent than the manual ultrasonic testing(MUT). It can scan welded parts, examines the scanned images, and saves the results as data files. AUT in NPPs is making use of commercial systems, and there has been some difficulties in calibration of the system. An AUT system is developed. It comprises of pulser/receiver, scanner and a control program(SonicWizard). The performance demonstration for piping welds in NPPs and the piping wall thickness measurement on site were conducted to verify this system. The test results of the ultrasonic testing system developed is satisfactory and effective.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.652-664
• /
• 2008

In this study, a Hazard Analysis Critical Control Point (HACCP) plan was developed for the sanitary mass production of commercial Korean rice cake products (Gaepidduk, Injulmi, and Julpyon). The microbiological properties of manufacturing flow were evaluated in order to develop the HACCP Plan. The moisture contents of the rice cakes ranged between 36.2${\sim}$55.3%, whereas the water activity of all samples ranged between 0.954${\sim}$1.0. Microorganisms testing was conducted during various phases of the product flow of Korean rice cake preparation, and included assessments of food equipment, work environment, and cooking employees on a small scale. During the manufacture of Injulmi, Julpyon and Gaepidduk, CCPs were purchasing & storage, steaming and cooling, molding, and holding in the A and B manufactories. At the critical limit of CCPs, storage was conducted below at $5^{\circ}C$ in soybean powder, oil, and paste with redbeans. The steaming process was conducted above at $99^{\circ}C$ for 40 min. Cooling and holding processes were conducted for 2 hours below at $15^{\circ}C$. The molding process included sanitary education for foodhandlers and training for operators. Thus, certain prerequisite programs had to be implemented prior to the implementation of the HACCP system. High levels of bacterial contamination were detected in the aprons worn to work by some employees. Additionally, periodic sanitary education for foodhandlers and training for operators or managers was required. Cross contamination by materials was expected at the place where materials were processed or stored.

• Korean Journal of Microbiology
• /
• v.53 no.4
• /
• pp.304-308
• /
• 2017

Researchers have comparatively fewer opportunities to conduct experiments on foot-and-mouth disease virus (FMDV), owing to the limited availability of biosafety level 3 facilities. Bovine rhinovirus (BRV) and human rhinovirus (HRV), which are genetically closely related to FMDV, have been evaluated in this study as model viruses for FMDV. To discover whether BRV and HRV have similar physicochemical properties as FMDV, virus susceptibility tests have been performed in different physical (pH and heat) and chemical (acidic/alkaline solutions and commercial disinfectants) conditions in vitro. Our data revealed that the physicochemical characteristics of BRV and HRV were nearly similar to those of FMDV.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.482-488
• /
• 2019

Leisure and business facilities have been steadily developing in Korea. Among waterborne leisure vessels and equipment, the distribution and sale of kayaks and canoes have significantly increased. Previously, (FRP) materials were primarily employed for constructing kayaks. However, owing to global warming and depletion of natural resources, the demand for non-polluting renewable energy is rapidly increasing, which has increased the demand for carbon fibers. To meet the requirements of changing social consciousness, a carbon fiber-based commercial kayak was designed in this study. Resistance analysis and structural safety were conducted by employing software tool for verifying the reliability of the proposed kayak. The pressure resistance and frictional resistance were examined in a wide range of speed. Obtained results indicate that at speeds greater than 2.6 m/s, the pressure resistance significantly increases and the total resistance also increases. Furthermore, the results corroborate that the proposed kayak structure has a adequate safety with respect to the design loads that are considered during operating conditions.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.497-508
• /
• 2019

Snowboarder accidents at ski resorts are increasing; therefore, it is essential to wear protective wrist, hip and knee protectors when snowboarding. However, most studies focus on the improvement of gear or expansion of safety facilities with few studies on protectors that directly safeguard the body from accidents caused by tumbling. Protectors currently on the market do not properly consider the needs of the users. Therefore, this study investigates the reality of usage and satisfaction rate of those that use snowboarding protectors along with factors deemed important upon wearing them to provide the grounds for the development of comfortable protectors. Subjects were 1,058 adults in their 20s to 40s. First, a survey was conducted regarding demographic traits as well as the wearing and purchasing of protectors. Second, 325 people that purchased and wore protectors were investigated in regards to the wearing satisfaction rate of current commercial protectors. The results showed that 86% of the 1,058 subjects wore protectors; knee protectors (72%), hip protectors (57%) and wrist protectors (38%). Important factors upon purchasing and wearing satisfaction were studied according to demographic traits, snowboarding experience, and number of snowboard rides for one season. As a result, the damage rate increased along with the number of snowboard rides for one season. Important factors considered when purchasing varied significantly according to sex, age, snowboarding experience, and favored slopes. The results of this study will help in the design of comfortable protectors for snowboarders.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.13-24
• /
• 2018

Recently, light pollution has become a serious environment issue caused by excessive uses of artificial light. Central and local governments have made efforts to manage light pollution and mitigate light pollution damages. Developing methods to diagnose light pollution is critical to effectively monitor light pollution conditions in Seoul. This study develops a methodology to create a map that presents the status of light pollution in Seoul, using International Space Station(ISS) night-time images. Through the map, we evaluated the areas that show high levels of light intensity and found out local characteristics of light intensity; Commercial area, office building concentrated area, and large sports facilities. The result of study provides basic understanding to present a new way for monitoring light pollution in urban sites.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.3-14
• /
• 2019

Copper is used in many electronic components and construction parts due to its excellent electrical conductivity and heat transfer characteristics, and also used for pre-plating for double layer coating such as nickel, so that copper is an essential material in modern industry. Despite the expected increase of usage and importance on wiring, sensors and data equipment in the next generation industries, it is hard for securing stable copper supply and resource management resulting from the copper prices are fluctuating owing to the economic crisis in Europe, the low economic growth trend in China, and President Trump's commitment to public industrial facilities investment in U.S.. Since most of the domestic copper consumption is used by electrolytic copper cathode, we studied not only copper recycling technology which is being commercialized but also current research trend under the research stage. This study aims to examine the characteristics of each process and the areas where future recycling technology development is required.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.2
• /
• pp.65-72
• /
• 2019

More than 64% of Korea's land is occupied by mountain regions, which have terrain characteristics that make it vulnerable to mountain disasters. The trails of Taebaeksan Mountain National Park-the region considered in this study-are located in the vicinity of steep slopes, and therefore, the region is vulnerable to landslides and debris flow during heavy storms. In this study, a slope stability model, which is a deterministic analysis method, was used to examine the potential occurrence of landslides. According to the soil classification of the detailed soil map, the specific weight of soil, effective cohesion, internal friction angle of soil, effective soil depth, and ground slope were used as the parameters of the model, and slope stability was evaluated based on the DEM of a 1 m grid. The results of the slope stability analysis showed that the more hazardous the area was, the closer the ratio of groundwater/effective soil depth is to 1.0. Further, many of the private houses and commercial facilities in the lower part of the national park were shown to be exposed to danger.