• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.428-433
• /
• 2001

상업시설물은 주거용 건축물과 함께 가장 많이 건설되는 시설물이다. IMF 이후, 건설시장은 경기침체와 원가 상승으로 크게 위축되었다. 이에 따라, 건설업에도 정보 인프라의 활용에 의한 생산성 향상에 관한 연구가 요구되어졌고, 이러한 연구 중 하나가 공사실적자료 관리 및 활용에 관한 것이다. 상업시설물의 실적자료 데이터베이스를 구축하기 위해 데이터 베이스 요소 분석을 하였다. 상업시설물의 주요관리항목과 이용자별 요구정보를 분석하여, 수집양식을 작성하고 이를 데이터베이스화 하였다. 활용에 대한 방안 연구는 건설업 라이프싸이클에서 원가 및 자원 항목에 대해 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.115-116
• /
• 2020

Recently, due to fires in high-rise residential and commercial buildings and apartments in Ulsan and Busan, the issue of evacuation safety in the event of a building fire is being closely watched. In the evacuation safety design for these building fires, it is important to secure evacuation routes considering the spatial characteristics of the building or the characteristics of the occupants and to take measures to protect the evacuation routes in order to ensure the safety of the occupants in the event of a fire. Although simulation is mainly used in Korea to assess the safety of evacuation, there is a big difference in that the Building Standards Act provides tools that can be calculated more than simulation in neighboring Japan. In addition to the evaluation method, which is called the "Building Law Assessment Methods" in Japan, the research team considered that it is important to know the process of evaluation in future domestic research, and investigated the contents of the evaluation process and wanted to apply it first to domestic buildings in the future.

• 설비공학논문집
• /
• 제27권11호
• /
• pp.567-573
• /
• 2015

Commercial buildings account for significant portions of the total building energy in Korea, and thus, a variety of research on chiller operation has been carried out. However, most of the studies were carried out on the chiller itself, i.e., the part load ratio characteristics and the corresponding electricity energy consumption patterns were not analyzed in existing studies. In this study, the part load ratio and the operating characteristics of the vapor compression chiller were analyzed within an office building equipped with the conventional variable air volume system. As a result, significant portions of total operating hours, cooling load, and energy consumption turned out to be in the part load ratio range of 0 through 50%. Thus, energy consumption was significantly affected by the chiller COP at low part load conditions, indicating that chiller operation at the part load is an important factor in commercial buildings.

• 한국실내디자인학회논문집
• /
• 제26권3호
• /
• pp.101-112
• /
• 2017

Based on an analysis of the characteristics of "Ecute" of the East Japan Railway Company (JR East) that planned the world's first large scale commercial facilities inside a ticket gate (paid-area including waiting room and platforms), the present study proposes a brand development of commercial facilities inside aged railway stations, where only basic railway business have been provided focusing on passenger transportation, by renewing the definition of railway commercial facilities and presenting a detailed planning and the direction of the operation system. A list of practical tasks that can be carried out in academia, planning and operation / management to facilitate the revitalization of the use of commercial facilities inside railway stations are as follows: 1) the setting of a wide scope for the revitalization of railway commercial facilities around the railway station focusing on private-funded stations in addition to existing stations; a setup of the direct scope of commercial development in the practical railway operation for passengers and stations in terms of external research, and a corresponding shift in thinking in terms of internal research 2) development of under used spaces such as the transfer area (Gongdeok Seoul Wangsimri Station are first target stations where more than four subway lines intersect) 3) brand establishment through improvement strategies for image and symbolism specialized for railway stations 4) rent of suitable business stores and layout of commercial facilities by analysis of passenger move pattern 5) development of commercial facilities which can attract customers by displaying various products, as well as finding a way to develop them in to a base facility that connects to local infrastructures 6) providing advertisement and management system for continual maintenance, and 7) brand specialization through unique storytelling and design plan that stimulates sensibility. The above study results can be utilized as a starting point for design brand awareness about commercial facilities in railway stations in Korea, which can be developed further to improve station image and passenger convenience, as well as to increase the revenue of railway businesses.

• 한국건축시공학회지
• /
• 제5권1호
• /
• pp.89-96
• /
• 2005

The increase of hish-rise residential-commercial buildings is required to cut down a term of works and the cost of construction. Reinforced concrete structures and steel framed reinforcement concrete that are commonly used have the difficulty in reducing them. Therefore, the purpose of this study is to propose a new precast concrete complex system and to analyze its economical feasibility. The economic analysis is performed through comparing the cost of a high-rise reinforced building that was already constructed with that of the new proposed precast concrete system, which is limited to structural frame work of typical floors. This study shows that the proposed precast concrete complex system is economical. Further research should be directed at including the influence of a term of works.

• KIEAE Journal
• /
• 제6권1호
• /
• pp.39-46
• /
• 2006

Multi-use housing and commercial buildings have been emerged according to social and economic changes of CBD in Seoul Metropolitan Areas. The purpose of this study is to clarify the characteristics of the multi-use building, to analyze the problems on the base of survey and to suggest the solutions for architectural planning, focusing on eco-friendly dwelling environment. A field survey with 46 subjects has been carried out with structured questionnaire. Some problems in planning of the complex building have been discussed in terms of environmental issues and design criteria. In conclusion, basic planning directions for improving the building environmental quality have been suggested.

• 한국농촌건축학회논문집
• /
• 제7권1호
• /
• pp.73-87
• /
• 2005

The purpose of this study is aimed at grasping the architectural characteristics of modern buildings in Gangneung from 1910's to 1970's. The results are as follows. 1) The commercial buildings are mostly unsymmetrical flat type and others except commercial buildings are mostly symmetrical flat type. 2)Up until the 1940's, staircases were located inner of building between the first and the second floor, however after the 1950's, they were separately located in one side of the building to ensure perpendicularly more space and easier mobility than before. 3)Windows were widely used in order to avoid monotonous wall elevation after 1950' s. 4)Striped decorations were put to use to decorate the front elevation of building. 5)Parapet which had decorative stripes to the top was generally used to hide roof.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.143-150
• /
• 2006

In this Study, it was investigated what the critical elements of the Architectural Review by the Seoul Building Design Committee were. The critical elements selected by the members of committee were systematically analyzed. They were based on the 169 cases reviewed by the Building Design Committee. The committee consists of Professors, famous architects, architectural experts and official members. Thus, the critical elements selected by the committee can be regarded as the important criteria for the forthcoming architectural reviewing process. The critical elements selected by 960 members of the committee were classified by the frequency. The results in this study showed that the critical elements were ordered as follows: (1)floor plan, (2)landscape gardening, (3)form, (4)open space, (5)structure, (6)plan for preventing disasters, (7)circulation for men and cars, (8)facilities, (9)parking, (10)revision of drawings and documents. These criteria of the architectural evaluation established by the Seoul Building Design Committee can be applied to the fundamental preparation of the architectural review.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.441-449
• /
• 2018

FE models for complex or large-scaled structures that need detailed modeling of structural components are usually constructed using commercial analysis softwares. Updating of such FE model by conventional sensitivity-based methods is difficult since repeated computation for perturbed parameters and manual calculations are needed to obtain sensitivity matrix in each iteration. In this study, an FE model updating procedure avoiding such difficulties by using response surface (RS) method and a Pareto-based multiobjective optimization (MOO) was formulated and applied to FE models constructed with a commercial analysis package. The test building is a low-rise reinforced concrete building that has been seismically retrofitted. Dynamic properties of the building were extracted from vibration tests performed before and after the seismic retrofits, respectively. The elastic modulus of concrete and masonry, and spring constants for the expansion joint were updated. Two RS functions representing the errors in the natural frequencies and mode shape, respectively, were obtained and used as the objective functions for MOO. Among the Pareto solutions, the best compromise solution was determined using the TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) procedure. A similar task was performed for retrofitted building by taking the updating parameters as the stiffness of modified or added members. Obtained parameters of the existing building were reasonably comparable with the current code provisions. However, the stiffness of added concrete shear walls and steel section jacketed members were considerably lower than expectation. Such low values are seemingly because the bond between new and existing concrete was not as good as the monolithically casted members, even though they were connected by the anchoring bars.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.326-342
• /
• 2022

Comparative analyses of a shield building subjected to a large commercial aircraft impact between decoupling method and coupling method are performed in this paper. The decoupling method is applying impact force time-history curves on impact area of the shield building to study impact damage effects on structure. The coupling method is using a model including aircraft and shield building to perform simulation of the entire impact process. Impact force time-history curves of the fuselage, wing and engine and their total impact force time-history curve are obtained by the entire aircraft normally impacting the rigid wall. Taking aircraft structure and impact progress into account some loading areas are determined to perform some comparative analyses between decoupling method and coupling method, the calculation results including displacement, plastic strain of concrete and stress of steel plate in impact area are given. If the loading area is determined unreasonably, it will be difficult to assess impact damage of impact area even though the accurate impact force of each part of aircraft obtained already. The coupling method presented at last in this paper can more reasonably evaluate the dynamic response of the shield building than the decoupling methods used in the current nuclear engineering design.