• 비파괴검사학회지
• /
• 제22권4호
• /
• pp.422-429
• /
• 2002

용접부 초음파 사각탐상은 용접 루트부나 counter bore와 같은 결함과 관련 없는 신호를 발생하는 기하학적 반사체로 인하여 신호의 식별이 매우 어렵다. 본 논문에서는 이와 같은 상황에서 결함 신호를 식별하는 새로운 기법을 제안하였다. 디컨볼루션(deconvolution)을 사용한 유사성함수의 개념을 도입한 새로운 기법에서는 먼저 결합과 기하학적 반사체에 대하여 기준신호와 대상신호를 획득하였으며 이들을 정규화 하였다. 대상신호를 기준신호로 디컨볼루션하여 얻은 유사성함수의 패턴으로부터 기하학적 반사 신호와 결함신호를 구분할 수 있었다. 그 결과로, 제안하고 있는 기법이 기하학적 반사체와 노치 모서리부에서 반사되는 신호를 분리하는데에 유용함을 알 수 있었다.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.9-20
• /
• 1999

본 논문에서는 고정 또는 자유 연단 조건의 모든 조합을 고려한 마름모꼴 평판의 휨 진동에 대한 엄밀한 해석방법을 제시한다. 본 논문의 주된 관점은 마름모꼴 평판 둔각 모서리의 경계조건이 고정 또는 자유일 때 휨응력의 특이도를 엄밀히 고려하여 해석하는 것이다. 고정 또는 자유인 모서리 응력 특이도의 중대한 영향력이 이해 될 수 있도록 충분히 큰 165。 둔각모서리를 갖는 마름모꼴 평판에 대하며 엄밀한 무차원 진동수와 수직 변동변위의 전형적인 등고선을 제시하였다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1671-1677
• /
• 2001

Cracks at mechanical fastener holes usually nucleate as elliptical comer cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks. The weight function method for elliptical arc through cracks at mechanical fastener holes has been developed and verified in the part I of this study. In part H, applying the weight function method, the effects of the amount of clearance on the mixed-mode stress intensity (actors are investigated and the change of crack shape is predicted from the analysis for various crack shapes. The stress intensity factors leer inclined crack are analyzed and critical angle at which mode I stress intensity factor becomes maximum is determined.

• 소성∙가공
• /
• 제16권7호
• /
• pp.530-537
• /
• 2007

This paper is concerned with the analysis of plastic deformation of bimetal co-extrusion process. Two sets of material combination have been adopted for analysis, i.e. combinations of Cu/Al and Fe/Al. In the first set of material combination, the selected materials are AA 1100 aluminum alloy as hard material and CDA 110 as soft one. This type of material selection is to examine the effect of hard core and soft sleeve and vice versa on the deformation pattern in terms of plastic zone and velocity discontinuity along the contact surface between construction materials. Four different cases of co-extrusion process in terms of material combination and interference bonding were simulated to investigate the effect of material arrangement between core and sleeve, and of bonding on the plastic zones and velocity discontinuity. In the other set of material combination, model materials used as core and sleeve were AA 1100 and AISI 1010, which are relatively soft and hard, respectively. Process parameters except diameter ratio of core to sleeve material such as semi-die angle, reduction in area in global sense and die comer radius have been set constant throughout the simulation to concentrate our effort on the analysis of influence of diameter ratio on deformation behavior such as deformation zone, surface expansion, exit velocity discontinuity between composite materials, and extrusion forces.

• 한국산학기술학회논문지
• /
• 제10권2호
• /
• pp.303-312
• /
• 2009

본 논문에서는 UWB 통신용 CPW 급전 디스크 섹터 안테나를 설계하고 제작한다. 또한 디스크 섹터 안테나의 부채꼴에 사각형 슬릿을 삽입하여 E-평면에서 방향성을 갖도록 하였다. 안테나의 입력 임피던스는 안테나를 구성하는 파라미터인 디스크 섹터의 반경, 디스크 섹터의 중심각, 접지면의 길이와 급전선 부근의 접지면 모서리의 길이를 변화시켜서 $50{\Omega}$을 갖는 급전선과 정합시켰다. 설계된 UWB 통신용 안테나의 크기는 $72mm{\times}26mm$이고, 시뮬레이션을 통한 안테나의 대역폭은 $3{\sim}13GHz$이다. 측정결과로부터 대역폭은 $1.98{\sim}11GHz$이고 제작된 안테나의 반사손실과 이득은 3.5GHz에서 -50.88dB, 1.34dBi, 5.5GHz에서 -12.27dB, 3.35dBi, 8GHz에서 -23.2dB, 3.8dBi이고 10GHz에서 -16.17dB, 5.2dBi를 갖는다.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.703-709
• /
• 2002

In order to investigate the smoke movement in three dimensional room fires, the center fire, wall fire and corner fire plume in different sized fires were studied experimentally by rectangular pool fire using methanol as a fuel. As the fire size became larger for the center fires placed at the center of the floor, the air flow rate entrained through the opening, average hot layer temperature, flame angle deflected backwards and mean flame height was observed to increase. On the other hand, as the fire size became smaller, the neutral plane height in the door and time reached steady-state was observed to decrease. The average hot layer temperature, mean flame height and doorway neutral plane height obtained from comer fire were higher than those produced by wall fires and center fires. The simple model for describing the effect of walls on the mean flame height was presented. It was shown that the model provides a good description of the present measurements, when used with the assumption by Hansell(1993), that the increase of the average flame height is equal to the ratio of the open to the total perimeters of the trays. Also the two models for predicting the effects of walls on the mean flame height were presented. These models overestimated the measured values of the mean flame height above fuel trays close to a wall and in a corner by approximately 19-26%, respectively.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.569-580
• /
• 2005

The present study investigates the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger. The effects of duct aspect ratio and flow velocity on the heat/mass transfer are investigated. Local heat/mass transfer coefficients on the corrugated duct sidewall are determined using a naphthalene sublimation technique. The aspect ratios of the wavy duct are 7.3, 4.7 and 1.8 with the corrugation angle of $145\Omega$. The Reynolds numbers, based on the duct hydraulic diameter, vary from 300 to 3,000. The results show that at the low Re(Re $\leq$ 1000) the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, non-uniform heat/mass transfer coefficients distributions appear. As the aspect ratio decreases, the number of cells formed by secondary vortices are reduced and secondary vortices and comer vortices mix due to decreased aspect ratio at Re$\leq$1000. At Re >1000, the effects of corner vortices become stronger. The average Sh for the aspect ratio of 7.3 and 4.7 are almost same. But at the small aspect ratio of 1.8, the average Sh decreases due to decreased aspect ratio. More pumping power (pressure loss) is required for the larger aspect ratio due to the higher flow instability.