• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.187-202
• /
• 2020

The exhaust nozzle serves back pressure of Pulse detonation combustor, so combustion chamber gets sufficient pressure for propulsion. In this context recent researches are focused on influence of nozzle effect on single cycle detonation wave propagation and propulsion performance of PDE. The effects of various nozzles like convergent-divergent nozzle, convergent nozzle, divergent nozzle and without nozzle at exit section of detonation tubes were computationally investigated to seek the desired propulsion performance. Further the effect of divergent nozzle length and half angle on detonation wave structure was analyzed. The simulations have been done using Ansys 14 Fluent platform. The LES turbulence model was used to simulate the combustion wave reacting flows in combustor with standard wall function. From these numerical simulations among four acquaint nozzles the highest thrust augmentation could be attained in divergent nozzle geometry and detonation wave propagation velocity eventually reaches to 1830 m/s, which is near about C-J velocity. Smaller the divergent nozzle half angle has a significant effect on faster detonation wave propagation.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1989-1998
• /
• 1995

Characteristics of the flame propagation for normal and abnormal combustion in hydrogen premixture in a cylindrical constant-volume combustion chamber are studied numerically. A detailed hydrogen oxidation kinetic mechanism, mixture transport properties and a model describing spark ignition process are used. The calculated pressure-time history of the stable deflagration wave propagation agrees well with the experiment. The ignition of the premixture in the unburned gas, initiated by the hot spot, causes a transition from deflagration to detonation under some initial temperature and pressure. Under the initial conditions with high temperature and pressure, excessive ignition energy initiates a strong blast wave and a detonation wave that follows. The chemical reaction in the detonation wave is much more vigorous than that in the deflagration wave and the peak pressure in the detonation wave is much higher than the equilibrium value.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.29-35
• /
• 2010

We produced cylindrical porous TiNi bodies by Self-propagating High-temperature Synthesis (SHS) process, varying the heating schedule prior to ignition of a loose preform compact made from (Ti+Ni) powder mixture. To investigate the effect of the heating schedule on the behaviour of combustion wave propagation and the structure of porous TiNi shape-memory alloy (SMA) body, change of temperature in the compact during SHS process was measured as a function of time and used for determining combustion temperature and combustion wave velocity. Microstructure of produced porous TiNi SMA body was observed and the results were discussed with the combustion characteristics. From the results it was concluded that the final average pore size could be controlled either by the combustion wave velocity or by the average temperature of the preform compact prior to ignition.

• Advances in aircraft and spacecraft science
• /
• 제10권3호
• /
• pp.203-222
• /
• 2023

The detonation combustion is a supersonic combustion process follows on shock wave oscillations in detonation tube. In this paper numerical studies are carried out combined effect of blockage ratio and spacing of obstacle on detonation wave propagation of hydrogen-air mixture in pulse detonation combustor. The deflagration to detonation transition of stoichiometric (ϕ=1)fuel-air mixture in channel has been analyzed for effect of blockage ratio (BR)=0.39, 0.51, 0.59, 0.71 with spacing of 2D and 3D. The reactive Navier-Stokes equation is used to solve the detonation wave propagation mechanism in Ansys Fluent platform. The result shows that fully developed detonation wave initiation regime is observed near smaller vortex generator ratio of BR=0.39 inside the combustor. The turbulent rate of reaction has also a great significance role for shock wave structure. However, vortices of rapid detonation wave are appears near thin boundary layer of each obstacle. Finally, detonation combustor demonstrates the superiority of pressure gain combustor with turbulent rate of reaction of 0.6 kg mol/m3 -s inside the detonation tube with obstacle spacing of 12 cm, this blockage enhanced the turbulence intensity and propulsive thrust. The successful detonation wave propagation speed is achieved in shortest possible time of 0.031s with a significance magnitude of 2349 m/s, which is higher than Chapman-Jouguet (C-J) velocity of 1848 m/s. Furthermore, stronger propulsive thrust force of 36.82 N is generated in pulse time of 0.031s.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.16-23
• /
• 2013

정상초음파장이 개재하는 메탄/공기 예혼합화염의 전파특성에 대한 당량비의 영향을 실험적 연구결과로 제시한다. 화염구조 가시화는 슐리렌 기법을 이용하였으며, 이미지 후처리를 통해 화염 전파 거동을 면밀히 관찰하였다. 정상초음파에 의한 화염 구조 변화가 연소반응을 촉진시켜 화염 전파속도를 증가시키는 것을 알 수 있었으며, 당량비가 증가할수록 정상초음파에 의한 화염전파속도의 증분은 감소하게 되고, 속도변화가 미미한 당량비 구간이 존재한다는 사실을 확인할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.221-224
• /
• 2003

T-분기관을 전파하는 데토네이션 파에 대한 수치적 연구가 수행되었다. T-분기관은 데토네이션 파를 이용하여 여러 개의 연소기를 점화시키는 연소파 점화기라는 새로운 로켓 점화체계의 핵심 부분이다. Euler 방정식과 Induction parameter 방정식이 지배방정식으로 이용되었으며 반응 항은 상세 반응 기구로 얻어진 화학 반응 데이터베이스로부터 모델 되었다. 연계된 방정식의 풀이에는 2차 정확도의 내재적 시간적분과 3차 정확도의 TVD 알고리즘이 이용되었다. 2백만 개를 초과하는 격자를 이용하여 붕괴와 재 점화를 포함하는 데토네이션파의 거동을 포착할 수 있었으며, 연소파 점화기 화염관의 설계 요소를 얻었다.

• 한국연소학회지
• /
• 제1권1호
• /
• pp.83-91
• /
• 1996

A numerical study is carried out to examine the ignition and propagation process of detonation wave in SCRam-accelerator operating in superdetonative mode. The time accurate solution of Reynolds averaged Navier-Stokes equations for chemically reacting flow is obtained by using the fully implicit numerical method and the higher order upwind scheme. As a result, it is clarified that the ignition process has its origin to the hot temperature region caused by shock-boundary layer interaction at the shoulder of projectile. After the ignition, the oblique detonation wave is generated and propagates toward the inlet while constructing complex shock-shock interaction and shock-boundary layer interaction. Finally, a standing oblique detonation wave is formed at the conical ramp.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.628-631
• /
• 2017

정상초음파가 인가된 탄화수소계 연료별/공기 혼합물의 당량비에 따른 연소특성 비교를 실험적 연구 결과로 제시한다. 전파화염의 이미지는 고속카메라를 이용하여 획득하였으며, 이미지 후처리를 통해 연료별 연소특성을 면밀히 관찰하였다. 정상초음파를 인가하면 탄화수소계 연료/공기 예혼합기의 이론당량비조건에서 연소반응을 촉진시킨다는 점을 확인하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 춘계학술대회 논문집
• /
• pp.29-36
• /
• 2004

A numerical study is carried out on the detonation wave propagation through a T-shaped flame tube, which represents a crucial part of the combustion wave ignition (CWI) system aimed for simultaneous ignition of multiple combustion chambers by delivering detonation waves. The formulation includes the Euler equations and an induction-parameter model. The reaction rate is treated based on a chemical kinetics database obtained from a detailed chemistry mechanism. A second-order implicit time integration and a third-order TVD algorithm are Implemented to solve the theoretical model numerically. A total of more than two-million grid points are used to provide direct insight into the dynamics of the detonation wave. Several important phenomena including detonation wave propagation, degeneration, and re-initiation are carefully examined. Information obtained can be effectively used to facilitate the design and optimization of the flame tubes of CWI systems.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.294-299
• /
• 2012

연소기 내의 연소반응 촉진 및 연소불안정성 해결의 단초를 제공하기 위해, 정상초음파가 개재된 프로판/공기 예혼합화염의 구조거동을 고찰하는 연구를 수행하였다. 화염대의 구조 변이를 가시화하기 위해 슐리렌 기법을 이용하였으며, 당량비에 따른 화염선단의 형상 및 화염 전파속도의 변화를 확인할 수 있었다. 정상초음파는 화염선단을 찌그러뜨렸고, 난류 화염으로의 천이를 가속시켰다.