• 한국분무공학회지
• /
• 제26권4호
• /
• pp.182-188
• /
• 2021

In this paper, using a transfer function-based analytical model, major factors influencing the acoustics and combustion instability in a two-stage duct system composed of a nozzle and a combustor were derived and their quantitative effects were evaluated. From the acoustic analysis, it was confirmed that the change in reflection coefficient and mean flow could have a great influence on the instability growth rate, and the area ratio and speed of sound ratio between the nozzle and the combustor are also key parameters to determine combustion instability as well as flame transfer functions.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.85-94
• /
• 2002

Computational flow dynamics(CFD) has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Though it needs many simplifications and complicated flow models, the reasonability of its results is not fully evaluated. For example, the inlet condition is calculated from an arbitrarily assumed properties of combustion gas release from the waste bed, since the combustion in the bed is difficult to be predicted. In this study, the computational modeling and calculation procedures of CFD for the grate type waste incinerator were evaluated using comparative simulations. Though the assumption method on the generation of the combustion gas directly affected the temperature and gas species concentrations, the overall flow pattern was dominated by the secondary air jets. The gaseous reaction could be included by assuming the release of the products of incomplete combusion from the bed. However, the reaction effficiency cannot not be directly evaluated from the species concentration, since it is not possible to simulate the actual co-existence of fuel rich or oxygen rich puffs over the bed. In predicting the turbulence, the higher order model, such as Reynolds stress model, gave difference shape of local recirculation zones, but similar results was acquired from the standard $k-{\varepsilon}$ model. Introducing radiation model was required for accurate temperature prediction, but it also caused heat imbalance due to the fixed temperature of the inlet, i.e. the waste bed. Thus, the computational modeling procedures on incinerators and the analysis of the predicted results should be progressed carefully. Though not validated experimentally, current simulation method is capable of comparative evaluation on the flow-related parameters such as the furnace shape and secondary air injection using identical inlet conditions. Quantitative analysis using measures of the residence time and mixing is essential to compare the flow performance efficiently.

• 한국연소학회지
• /
• 제2권1호
• /
• pp.17-27
• /
• 1997

It is well known that NOx formation has a strong dependence on the maximum temperature and correspondingly with the maximum chamber pressure of a closed combustion system. However, in a case of impinging-jet-flame (IJF hereafter) combustion with opposed dual pre-chambers, low $NO_x$ formation with high pressure could be achieved, but its mechanism has not been clearly understood so far. In this study, a three-dimensional analysis is adopted to resolve time-variant local properties that might indicate the mechanism of IJF combustion. Numerical results are verified by comparing them with experiments. The IJF combustion in a vessel with no pre-chamber, with single pre-chamber, and with dual pre-chambers is studied. The orifice diameter and the volumetric ratio of pre-chamber are used as geometric parameters. The effects of main-chamber ignition delay time and combustion time of main-chamber, orifice exit velocity, orifice exit temperature, turbulent kinetic energy of main-chamber and spatial distribution of temperature in the latter stage of combustion are investigated. A longer main-chamber ignition delay and a shorter main-chamber combustion time suppress the formation of high temperature region with respect to mean temperature, which consequently results in less NO production.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.240-246
• /
• 2005

현재 개발 중에 있는 30-tonf-class 실물형 액체로켓연소기는 이미 설계검증을 위해 수차례의 연소시험이 이루어졌으며 그 결과 높은 연소효율을 얻었다. 연소성능과 더불어 액체로켓연소기의 중요한 또 하나의 요소는 바로 연소안정성이다. 연소안정성에 대한 평가시험은 개발하고자 하는 액체로켓연소기의 연소불안정 발생 빈도를 파악하는 시험으로서 액체로켓연소기 개발시 꼭 확인해야하는 시험이라 할 수 있다. 펄스건을 이용한 스테인레스 스틸 재질의 임시 배플이 장착된 실물형 연소기의 연소안정성 평가시험은 성공적으로 수행되었으며 그 결과 우수한 연소안정성 특성을 얻었다. 시험결과는 다음 호기의 실물형 연소기 배플 설계에 활용될 예정이다.

• 한국전산유체공학회지
• /
• 제7권3호
• /
• pp.17-26
• /
• 2002

Computational fluid dynamic(CFD) analysis has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Since the computational modeling inevitably requires many simplifications and complicated sub-models, validity of the results should be carefully evaluated. In this study, major computational modeling and procedure of usual simulation methods for the grate-type waste incinerators were assessed. Usual simulation method does not explicitly incorporate the waste combustion, simply by assuming the combustion gas properties from the waste bed which is treated as an inlet plane. However, effect of this arbitrary assumption on the overall flow pattern is not significant, since the flow pattern is dominated by strong pattern of jet flows of the secondary air. Thus, this method is valid in understanding the effect of flow-related parameters. In analyzing the results, deriving conclusive information directly from temperature and chemical species concentration should be avoided, since the model prediction for the gaseous reaction and the radiation reveals significant discrepancies against the actual phenomena. Use of quantitative measures such as residence time is very efficient in evaluating the flow performance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.73-77
• /
• 2003

액체 로켓엔진 개발과정에서 수행되는 여러 가지 시험 중 연소 안정성 평가 시험을 통해, KSR-III 로켓엔진의 연소 안정성을 평가하였다. 안정성 평가시험에서, 엔진이 외부 교란에 의한 압력 진통을 감쇠시켜 본래의 안정한 연소로 회복되는 경우, 그 엔진은 연소 안정화 능력을 가지고 있다고 판정할 수 있다. 로켓엔진은, 교란의 크기를 예측하기 어려운 외부 섭동에 노출될 수 있으므로, 엔진의 연소 안정화 가능 여부를 확인하는 것과 더불어 엔진이 갖고 있는 연소 안정화 능력을 정량화하여 파악하는 작업이 필요하다. 이를 위해 몇 가지 인자를 도입하였고, 이를 평가하는 방법을 검토하였다. 성공적으로 완료된 KSR-III 로켓개발과정에서 로켓엔진의 안정성 확보를 위해 5회의 안정성 평가 시험이 수행되었다. 이를 토대로, 앞서 언급한 안정화 능력의 정량화 방법을 KSR-III 엔진에 적용하여 그 엔진의 안정화 성능을 분석하였다.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.166-173
• /
• 2006

This study investigates a heavy duty diesel engine with swept vol. 12.6L, 4cycle-OHC type to verify the effects of the performance and exhaust gas emission according to the variable specifications of both swirl ratio and flow coefficient in inlet port, combustion bowl and fuel injection system. To meet the high BMEP and stringent exhaust emission standard, a turbocharger with wastegate and an intercooler were installed in the engine. Helical port, major design parameters for combustion chamber and electronic fuel injection pump with 1,000bar were reviewed and applied. Confirmation tests were also performed to meet the target value, $NO_x$ 5.0g/kWh and PM 0.1g/kWh of Euro3 exhaust emission legislation. The results of this study show that not only is it effective to use a relatively bigger bowl size for controlling rapid burning condition due to the decreased in-bowl swirl, but also to use a concave cam with double injection rates to decrease $NO_x$.

• 한국연소학회지
• /
• 제18권2호
• /
• pp.17-22
• /
• 2013

In this study, we tested the absorption of $CO_2$ in combustion gas into an alkaline wastewater to simultaneously control $CO_2$ and wastewater. During the experiment, we investigated the effects of operating parameters on neutralization characteristics of the wastewater by using $CO_2$ in a bench-scale semi-batch jet loop reactor (0.1 m diameter and 1.0 m in height). The operating parameters investigated in the study are gas flow rate of 1.0-2.0 L/min, liquid recirculation flow rate of 4-32 L/min, and liquid temperature of $20-25^{\circ}C$. It was shown that the initial pH of wastewater rapidly decreased with increased gas flow rate for a given liquid recirculation flow rate. This was due to the increase in the gas holdup and the interfacial area at higher gas flow rate in the reactor. At constant gas flow rate, the time required to neutralize the wastewater initial pH of 10.1 decreased with liquid recirculation flow rate ($Q_L$), reached a minimum value in the range of $Q_L$ = 16-24 L/min, and then increased with further increase in $Q_L$. Further, the time required to neutralize the wastewater was shortened at higher temperatures.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.38-43
• /
• 2013

In this study, we tested the absorption of $CO_2$ in combustion gas into an alkaline wastewater to simultaneously control $CO_2$ and wastewater. During the experiment, we investigated the effects of operating parameters on neutralization characteristics of the wastewater by using $CO_2$ in a bench-scale semi-batch jet loop reactor (0.1 m diameter and 1.0 m in height). The operating parameters investigated in the study are gas flow rate of 1.0-2.0 L/min, liquid recirculation flow rate of 4-32 L/min, and liquid temperature of $20-25^{\circ}C$. It was shown that the initial pH of wastewater rapidly decreased with increased gas flow rate for a given liquid recirculation flow rate. This was due to the increase in the gas holdup and the interfacial area at higher gas flow rate in the reactor. At constant gas flow rate, the time required to neutralize the wastewater initial pH of 10.1 decreased with liquid recirculation flow rate ($Q_L$), reached a minimum value in the range of $Q_L$ = 16-24 L/min, and then increased with further increase in $Q_L$. Further, the time required to neutralize the wastewater was shortened at higher temperatures.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.1-8
• /
• 2013

모형 연소실에서 충돌형 분사기의 연소 안정성 평가를 위해 시간지연(time lag)과 간섭인자(interaction index)의 관계를 연구하였다. 산화제 분사 속도의 5%에 해당하는 섭동을 공진주파수로 인위적으로 가진하여 이에 대한 화염의 응답특성을 분석하였다. 연료와 산화제의 혼합지점인 충돌점들, 즉, 특성길이 위치에서 속도섭동과 열방출율 섭동간의 관계를 시간지연 모델을 이용하여 나타내었다. 시간지연을 정량화하는 개선된 방법으로서, 수치해석을 통해 얻은 결과로부터 분사기 출구면으로부터 충돌점까지 평균속도를 이용하는 방법을 제안하였다. 축방향의 평균속도가 증가할수록 시간지연이 짧아지는 경향성을 확인할 수 있었다.