• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.296-299
• /
• 2001

Data on the oil spill recovery from the water surface by light floating electromagnetic plants using a new magnetic adsorbent are given. The feasibility scope for further oil recovery from such gathered mixtures(oil + adsorbent), reuse of this magnetic adsorbent and its property reclaiming and recycling were shown. The basic conception of the oil spill recovery and efficiency of this method were set forth.

• 공업화학
• /
• 제5권2호
• /
• pp.337-344
• /
• 1994

높은 연소효율과 환경오염물질을 적게 배출하는 75kw급 소형 접선방향 연료주입식 수직형 사이클론 연소기를 이용하여 성상이 다른 수입 유연탄(역청탄, 아역청탄)을 시료로 하여 공기비 0.4~1.6 범위에서 각각의 연소 특성 및 연소 후 회분의 포집효율을 조사하였다. 로 내 온도 분포는 전영역에서 역청탄이 아역청탄보다 약 $100^{\circ}C$ 이상 높게 나타났고 로 내에서는 로 하부와 축선이 높게 나타났다.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.121-130
• /
• 1999

It is necessary to measure pressure, temperature, chemical equilibrium and the shape of flame in order to understand the combustion process in a combustion chamber. In particular, the flame formulation and combustion process of divided combustion chamber are different from those of a single chamber, And the variable diameter of a jet hole can effect not only physical properties like ejection velocity, temperature and time of combustion but also a chemical property like the reaction mechanism. Accordingly temperature is one of the most important factors which influence the combustion mechanism. This paper observed shape of flame by using the schlieren photographs and measured the pressure in a combustion chamber and the reaching time of the flame by ion probe By doing these, we investigation the formulation of the flame and the process of propagation. These measurement methods can be advanced in understanding the combustion process and process and propagation of flame.

• 한국연소학회지
• /
• 제10권1호
• /
• pp.27-36
• /
• 2005

In this study, we investigated characteristics of a gas flow and a combustion property during the combustion of a RDF in a pyrolysis melting incinerator with disposal rate of 30 kg/hr. The RDF was pyrolyzed through the pyrolysis chamber at $600^{\circ}C$ of the chamber surface without oxygen condition. The pyrolysis gas was injected in the combustion chamber. It was burned by means of the staged combustion that was injecting secondary and tertiary air in the combustor. We measured the temperatures and the gas components in the combustion chamber while maintaining the air-fuel ratio of 1.3. Finally, we confirm that additional air injection, secondary and tertiary air ratio, was the most important factor to reduce NOx.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.296-299
• /
• 2001

Data on the oil spill recovery from the water surface by light floating electromagnetic plants using a new magnetic adsorbent are given. The feasibility scope for further oil recovery from such gathered mixtures(oil+adsorbent), reuse of this magnetic adsorbent and its properly reclaiming and recycling were shown. The basic conception of the oil spill recovery and efficiency of this method were set forth.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.273-273
• /
• 1997

• 한국안전학회지
• /
• 제18권1호
• /
• pp.71-75
• /
• 2003

The purpose of this study was to review the factors that influence on the combustion experiment of oxidizing solid such as mixing ratio of oxidizing solid and combustible support content ratio of oxidizing solid, ambient temperature, maturing time, combustible support, and additives. The 30g mixing compound samples of oxidizing solid and combustible support were tested with different mixing ratios. As a result, the Infest burning time was measured when mixing ratio was 4 (oxidizing solid) : 1 (combustible support). And the burning time was decreasing as the ambient temperature and maturing time were increasing.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1995년도 제5회 학술강연회논문집
• /
• pp.3-8
• /
• 1995

An experimental investigation was conducted in order to figure out the multiple fire effects on the combustion efficiency and fuel properties of the solid fuel ramjet. Pure HTPB and metallized $B_4$C/HTPB fuel were studied. Fuel property effects were analyzed by using differential scanning calorimetry, The thermal or mechanical properties of the fuel grain were not affected and the combustion efficiency was a little increased.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Wastes such as shredder dust of disposed vehicles can be decomposed into low calorific flammable gases by Pyrolysis gasification. A stationary electric Power generation using an internal combustion engine fuelled with the waste-pyrolysis gas is an effective way to ease both waste management and energy saving issues. The waste-pyrolysis gas mainly consists of H$_2$, CO, $CO_2$ and $N_2$. The composition and heating value of the gas generated depend on the conversion process and the property of the initial waste. This research analyzed the characteristics of the combustion and the exhaust emissions in a premixed charge spark ignition engine fuelled with several kinds of model gases, which were selected to simulate the pyrolysis-gases of automobile shredder dusts. The influences of the heating value and composition of the fuel were analyzed parametrically. Furthermore, optical analyses of the combustion flame were made to study the influence of the fuel's inert gas on the flame propagation.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.62-67
• /
• 1996

The smouldering combustion of cellulose Insulation treated with boric acid - borax - aluminium sulfate as combustion retardants are examined by candle type combustibility tester. The flammability behavior of combustion process is LOI, Smouldering region, Smouldering, Flamming spread region and Flame spread region. In this experiment, Particle size of four examined LOI, L.Point, H.Point, at the biggest size show high LOI. The surface area is connected with thermal conduction. The phenomena of combustion transition are governed by quantity of combustible gas generation in heating zone of cellulose insulation.