• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.5
• /
• pp.479-487
• /
• 2009

This paper describes the design of a full-spade twisted rudder section by using the genetic algorithm based on VLM(Vortex Lattice Method) and panel method. The developed propeller- rudder analysis program has been validated by comparing with experimental data. The developed code has been used for the design of a twisted full-spade rudder especially for finding out optimum section. The optimization has been firstly carried out by the genetic algorithm. The more detail variation of a rudder section has been also conducted by changing section profile in more detail to confirm the most optimum section profile. The developed new twisted rudder has been compared with existing twisted rudder by cavitation testing in the cavitation tunnel at MOERI. It is concluded that the developed twisted rudder has a lower cavity in comparison with existing twisted rudder. The verification of efficiency gain is expected to be carried out through self-propulsion tests in the near future.

• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.847-852
• /
• 2006

A fitting process carried out in the automobile transmission assembly line is classified into three classes; heat fitting, press fitting, and their combined fitting. Heat fitting is a method that applies heat in the outer diameter of a gear to a suitable range under the tempering temperature and assembles the gear and the shaft made larger than the inner radius of the gear. Its stress depends on the yield strength of a gear. Press fitting is a method that generally squeezes gear toward that of a shaft at room temperature by a press. Another method heats warmly gear and safely squeezes it toward that of a shaft. A warm shrink fitting process for an automobile transmission part is now gradually increased, but the parts (shaft/gear) assembled by the process produced dimensional change in both outer diameter and profile of the gear so that it may cause noise and vibration between gears. In order to solve these problems, we need an analysis of a warm shrink fitting process in which design parameters such as contact pressure according to fitting interference between outer diameter of a shaft and inner diameter of a gear, fitting temperature, and profile tolerance of gear are involved. In this study, an closed form equation to predict the contact pressure and fitting load was proposed in order to develop an optimization technique of a warm shrink fitting process and verified its reliability through the experimental results measured in the field and FEM, thermal-structural coupled field analysis. Actual loads measured in the field have a good agreement with the results obtained from theoretical and finite element analysis and also the expanded amounts of the outer diameters of the gears have a good agreement with the results.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.167-173
• /
• 2007

The temporalis fascia graft has been widely used in the correction of nasal deformities. The fascia can be used alone or combined for augmentation rhinoplasty. The fascia graft provides adequate coverage, contour, and bulk on the profile of the nose, as well as an inconspicuous donor site. A depressed radix area can be successfully corrected by the fascia graft. We present two cases of nasal radix augmentation by using temporalis fascia graft. Two male patients presented with the skeletal class III malocclusion and the depressed radix. A planned orthognathic surgery and the temporalis fascia graft to the radix were performed. The malocclusion and the profile of the patients were markedly improved after the operation. Not only the radix but also the nose was improved in its size and length. There was no noticeable resorption or displacement of the radix area at follow-up. The temporalis fascia graft could be an appropriate surgical technique in radix augmentation and nose lengthening.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.806-816
• /
• 2009

Character recognition system consists of four step; text localization, text segmentation, character segmentation, and recognition. The character segmentation is very important and difficult because of noise, illumination, and so on. For high recognition rates of the system, it is necessary to take good performance of character segmentation algorithm. Many algorithms for character segmentation have been developed up to now, and many people have been recently making researches in segmentation of touching or overlapping character. Most of algorithms cannot apply to the text regions of management number marked on the slab in steel image, because the text regions are irregular such as touching character by strong illumination and by trouble of nozzle in marking machine, and loss of character. It is difficult to gain high success rate in various cases. This paper describes a new algorithm of character segmentation to recognize slab management number marked on the slab in the steel image. It is very important that pre-processing step is to convert gray image to binary image without loss of character and touching character. In this binary image, non-touching characters are simply separated by using vertical projection profile. For separating touching characters, after we use combined profile to find candidate points of boundary, decide real character boundary by using method based on recognition. In recognition step, we remove noise of character images, then recognize respective character images. In this paper, the proposed algorithm is effective for character segmentation and recognition of various text regions on the slab in steel image.

• Journal of Applied Biological Chemistry
• /
• v.56 no.4
• /
• pp.219-227
• /
• 2013

This study was to investigate serum triglyceride (TG), phospholipid (PL), and cholesterol concentrations after feeding the combined diets of prepared traditional Cheonggukjang (TC) or Cheonggukjang made from sword bean powder (CS), the feed, and high-fat cholesterols at certain ratio for 8 weeks in rats, and then confirmed the effects of the diets based on the changes in the tissues of livers, kidneys, and spleens. The serum TG concentrations were lower in CS group compared to that of in TC group. The increase of PL concentrations was greater in CS group than that of TC group. FChCS6 group (92% feed+2% cholesterol+6% CS) showed the lowest total-cholesterol (T-C), $60.1{\pm}8.5mg/dL$, indicating that CS was effective to lower the T-C. Both TG/PL and T-C/PL ratio tended to be decreased. As CS intake was effective in the reduction of low density lipoprotein-cholesterol level as well as the increase of high density lipoprotein-cholesterol level, it would be effective in the prevention of adult diseases and circulatory diseases. It was confirmed that there were no changes in organ appearance and tissues in the rats with CS intake. Therefore, CS intake showed superior functionalities than that of TC intake.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.399-406
• /
• 2013

In the present study, the flat plate model test method is developed to evaluate the skin friction of the marine coating in the cavitation tunnel. Six-component force balance is used to measure the profile drag of the flat plate and strut. LDV(laser Doppler velocimetry) technique is also employed to evaluate the drag and to figure out the reason of the drag reduction. The flow velocities above the surface can be used to assess the skin friction, combined with direct force measurement. Since the vortical structure in the coherent turbulence structure influences on the skin friction in the high Reynolds number regime, the interaction between the turbulence structure and the surface wall is paying more attention. This sort of thing is important in the passive control of the turbulent boundary layer because the skin friction can't be determined only by wall condition. As complicated flow phenomena exist around a paint film, systematic measurement and analysis are necessary to evaluate the skin friction appropriately.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.4031-4035
• /
• 2016

Background: In the adjuvant treatment of breast cancer, anthracycline and taxane based regimens can be used concomitantly or sequentially. The best order in the sequential regimens has yet to be well established. This study evaluated the feasibility of 4 cycles of adjuvant taxotere ($100mg/m^2$) every 3 weeks followed by 4 cycles of doxorubicin ($60mg/m^2$) and cyclophosphamide ($600mg/m^2$) every 3 weeks. The primary outcome was the safety profile. Secondary outcomes were disease free survival (DFS) and overall survival (OS). Materials and Methods: This non-randomize prospective phase II stud was performed at Jordan University of Science and Technology and its affiliated King Abdulla Teaching Hospital between July 2009 and August 2010. Data collection was closed on May $31^{th}$, 2015 giving a median follow up period of 62 months. The study was approved by the institutional review board and a written informed consent was obtained for each patient. Results: Fifty patients were enrolled. The median age was 53.1 years (range 34-76). One patient (2%) had stage I disease, 17 (34%) stage II, and 32 (64.0%) stage III. Forty-six patients were evaluable for efficacy analysis. The completion rate was 95.7%. No dose modifications were needed. The incidences of grade 3-4 neutropenia and febrile neutropenia were 14 % and 10%. No grade 3-4 non-hematological adverse events were encountered. At a median follow up time of 62 months the OS and the DFS rates were 76.1% and 56.5%. Those for stages I and II combined were 100% and 75%. Conclusions: Taxotere first followed by doxorubicin-cyclophosphamide appears a feasible regimen as evidenced by an acceptable completion rate, a satisfactory safety profile, and an OS and DFS rates comparable to other studies.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.707-724
• /
• 1993

The purpose of the study is to estimate hard and soft tissue changes after orthognathic surgery for the correction of the mandibular prognathism and to describe interrelationship and ratios of soft and hard tissue changes. The presurgical and postsurgical lateral cephalograms of 31 treated patients(17 males and 14 females) was used ; these patients had received combined orthodontic-surgical treatment by means of a bilateral sagittal split ramus osteotomy. Their ages ranged from 16 to 31 years and mean age was 21.4 years. A computerized cephalometric appraisal was developed and used to analyse linear and angular changes of skeletal and soft tissue profile. The statistical elaboration of the data was made by means of $SPSS/PC^+$. The results of the study were as follows : 1. The correlations of soft and hard tissue horizontal changes were significantly high and the ratios were $97\%$ at LI, $107\%$ at ILS, and $93\%$ at Pog'. 2. The correlations of vertical changes at Stm, LI and horizontal changes at Pog were high$(26\%)$ and at the other areas were not statistically high. 3. The correlations of soft ad hard tissue vertical changes were not significantly high in all areas except Gn' $(30\%)$ and Me' $(56\%)$. 4. The soft tissue thickness was significantly decreased in upper lip and increased in lower lip, and the amount of changes after surgery was reversely correlated with initial thickness. 5. The facial convexity was increased and relative protrusion of upper lip was increased and that of lower lip was decreased. 6. The upper to lower facial height(Gl-Sn/Sn-Me') was increased and upper to lower jaw height(Sn-Stms/Stmi-Me') was increased.