• 제목/요약/키워드: Combined controller

검색결과 387건 처리시간 0.029초

유전알고리즘.신경회로망.퍼지논리가 결합된 지능제어기의 구현 (Realization of Intelligence Controller Using Genetic Algorithm.Neural Network.Fuzzy Logic)

  • 이상부;김형수
    • 디지털콘텐츠학회 논문지
    • /
    • 제2권1호
    • /
    • pp.51-61
    • /
    • 2001
  • 퍼지 제어기(FLC)는 고전적인 제어기 보다 외란에 강하고 초기치에 대한 과도응답도 우수할 뿐만 아니라 시스템의 수학적 모델과 파라메터 값을 알지 못하더라도 적절한 제어가 가능하다. 그러나 퍼지 제어기의 제어 규칙 생성은 전문가의 경험과 일단 결정된 제어 규칙은 고정됨으로 인해 제어 시스템의 환경변화에 적응할 수 없는 한계성이 있다. 또한 제어기의 출력값은 미세한 오차를 가지곤 있어 정확한 목표 값에 수렴할 수 없다. 이러한 미세한 오차를 없애기 위하여 여러 가지 방법이 연구되고 있는데, 본 논문에서는 FLC에 NN(Neural Network)과 GA(Genetic Algorithm)를 결합한 GA-FNNIC(유전알고리즘-퍼지 신경망 지능 제어기 : Genetic Algorithm - Fuzzy Neural network Intelligence Controller)를 제안한다. 제안된 GA-FNNIC와 FLC 제어기 간의 출력 특성, 수렴속도, 과도특성과 상승시간에 대해 비교 분석하고, 최종적으로 본 GA-FNNIC가 오차없이 목표치에 정확하게 수렴하는 것을 보인다.

  • PDF

DYNAMIC SIMULATION MODEL OF A HYBRID POWERTRAIN AND CONTROLLER USING CO-SIMULATION - PART I: POWERTRAIN MODELLING

  • Cho, B.;Vaughan, N.D.
    • International Journal of Automotive Technology
    • /
    • 제7권4호
    • /
    • pp.459-468
    • /
    • 2006
  • The objective of this paper is the development of the forward-looking dynamic simulation model of a hybrid electric vehicle(HEV) for a fuel economy study. The specification of the vehicle is determined based on two factors, engine peak power to curb weight ratio and specific engine power. The steady state efficiency models of the powertrain components are explained in detail. These include a spark ignition direct injection(SIDI) engine, an integrated starter alternator(ISA), and an infinitely variable transmission(IVT). The paper describes the integration of these models into a forward facing dynamic simulation diagram using the AMESim environment. Appropriate vehicle and driver models have been added and described. The controller was designed in Simulink and was combined with the physical powertrain model by the co-simulation interface. Finally, the simulation results of the HEV are compared with those of a baseline vehicle in order to demonstrate the fuel economy potential. Results for the vehicle speed error and the fuel economy over standard driving cycles are illustrated.

ATmega8535를 이용한 주차 유도 시스템 (A study on the design of a parking guidance using ATmega8535)

  • 김민구;구태회;김영민;김한섭;심새로얼;소대화
    • 동굴
    • /
    • 제77호
    • /
    • pp.67-72
    • /
    • 2007
  • ATMega8535 Controller is the ideal solution for use as a standard controller in many applications. The small compact size combined with easy program updates and modifications, make it ideal for use in machinery and control systems, such as alarms, card readers, real-time monitoring applications and much more. This board is ideal as the brains of your robot or at the center of your home-monitoring system. Today, most drivers must use a parking place day by day. Therefore we make time shorten. Using above-mentioned ATmega8535, a sensor of infrared rays, led and lcd, we will make a parking system which is able to display parking situation and lead a car at the best position of Parking easily and quickly. Trying this project, we will be more closer to practical application of electronic engineering bit by bit.

PSCAD/EMTDC를 이용한 전압 Sag 보상을 위한 배전용 정지형 보상기의 LQR 제어기 설계 (Design of LQR Controller of DSIATCOM for Compensating Voltage Sag Using PSCAD/EMTDC)

  • 이명언;정수영;최규하
    • 에너지공학
    • /
    • 제13권1호
    • /
    • pp.68-74
    • /
    • 2004
  • 본 논문에서는 전압 sag 보상을 위한 배전용 정지형 보상기 (DSTATCOM) 제어기를 설계하고 PSCAD/EMTDC로 확인하였다. DSIATCOM의 전류성분을 dq분해 해석을 통하여 상태방정식을 유도하고 부하모델과 네트워크의 제약조건을 고려하여 결합 모델을 제시하였다. 1선 지락 사고시 PI 제어기보다 LQR 제어기의 응답 특성이 우수함을 검증하고 전압 Sag가 개선됨을 보였다.

A Low-Cost Digital PWM-Controlled LED Driver with PFC and Low Light Flicker

  • Li, Yi;Lim, Jae-Woo;Kim, Hee-Jun
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권6호
    • /
    • pp.2334-2342
    • /
    • 2015
  • This paper proposes an LED driving circuit with a digital controller, power factor correct (PFC) function, and low light flicker. The key topology of the proposed circuit is a conventional Flyback combined with a pre-stage. As a result, there will be less light flicker than with other one-stage PFC circuits. A digital controller, implemented using a low-cost microcontroller, dsPIC30F2020, will meet PFC and low light flicker. The experimental results validate the functionality of the proposed circuit.

직접순시토크 제어에 의한 SR구동형 유압 펌프시스템의 고성능 압력제어 (A High Performance Pressure Control of SR Type Hydraulic Pump System using Direct Instantaneous Torque Control Method)

  • 안진우
    • 전기학회논문지
    • /
    • 제56권10호
    • /
    • pp.1751-1756
    • /
    • 2007
  • This paper presents a high performance pressure control scheme for SR(Switched Reluctance) type hydraulic oil pump using DITC(Direct Instantaneous Torque Control). SR drive has a good feature for pump applications due to a high efficiency, high speed and high torque characteristics. But, SR drive has high torque ripple in commutation region. So, the pump pressure variation is high in the region. In order to reduce the pressure variation, DITC combined with pressure control scheme is presented in this paper. A simple PI controller with flow and pressure limit, generates a reference torque to keep the constant actual pump pressure. The direct torque controller of SR drive generates inverter switching signals according to a control rule and a torque estimator. Computer simulation and experiemtal results show the validation of the proposed control scheme.

가변속 열펌프의 과열도 제어특성에 관한 실험적 연구 (Experimental Study on Superheat Control of a Variable Speed Heat Pump)

  • 최종민;김용찬;하진호
    • 설비공학논문집
    • /
    • 제13권4호
    • /
    • pp.233-241
    • /
    • 2001
  • In the present study, various experiments were performed to investigate the capacity modulation and transient response control using a variable speed compressor and electronic expansion valve(EEV). Based on the experimental results, the operation control algorithm and real time digital control system were constructed to adjust the superheat at the inlet of the compressor. Superheat control was fulfilled using both the PI feedback controller and PI controller combined with a feedforward concept. As a result, the tracking performance of the latter was better than that of former.

  • PDF

패킷 위성통신의 빔스위칭 요구할당 다중 접속 방식에 대한 성능 연구 (Performance on the Beam-Switched Demand Assigned Multiple Access for the Packet Satellite Communication)

  • 김덕년;김재명
    • 대한전자공학회논문지
    • /
    • 제26권10호
    • /
    • pp.1462-1470
    • /
    • 1989
  • This paper aims at investigating the Demand Assigned Multiple Access(DAMA) system for the packet-switched Satellite Communication. An onboard processor of the multisport beam satellite incorporates the ground controller to macimize the packet transmissions for each slot. 'Request Following' trnasmission mode is introduced as a transmission strategy of ground station under the control of its zone controller. The combined scheme of reservation channel access and contention channel access was proposed by Lee & Mark[3] for improving the Delay-Throughput performance. Our scheme provides less communication delay of approximately max. 200msec for achieving the corresponding throughput than the Lee & Mark's work does. Delay versus Throughput curves as well as Delay versus Traffic parameter curves are obtained. Numerical results obtained through the analysis and by the computer simulation show that the proposed scheme provides the low average packer delay even under the condition that the number of transponders (M)is below the half of the number of zones(N).

  • PDF

새로운 슬라이딩 모드를 이용한 $H_{\infty}$ 제어기의 설계 - 상태공간 접근방법 (A Study on the $H_{\infty}$ Controller of the Novel Sliding Mode - State Space Approach)

  • 김민찬;박승규;곽군평
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 B
    • /
    • pp.915-917
    • /
    • 1999
  • In this paper, a novel sliding surface is proposed by introducing a virtual state. This sliding surface has nominal dynamics of an original system and makes it possible that the Sliding Mode Control(SMC) technique is combined with the $H_{\infty}$ controller. Its design is based on the augument system whose dynamics have one higher order than that of the original system. The reaching phase is removed by setting an initial virtual state which makes the initial switching function equal to zero.

  • PDF

Controller Design for an Autonomous Underwater Vehicle Using Estimated Hydrodynamic Coefficients

  • 김준영
    • 한국해양공학회지
    • /
    • 제20권6호
    • /
    • pp.7-17
    • /
    • 2006
  • Depth and heading control of an AUV are considered to follow the predetermined depth and heading angle. The proposed control algorithm is designed. based on a sliding mode control using estimated hydrodynamic coefficients. The hydrodynamic coefficients are estimated with conventional nonlinear observer techniques, such as sliding mode observer and extended Kalman filter. By using the estimated coefficients, a sliding mode controller is constructed for the combined diving and steering maneuver. The simulation results of the proposed control system are compared with those of control system with true coefficients. This paper demonstrates the proposed control system, discusses the mechanisms that make the system stable and follows the desired depth and heading angle, accurately, in the presence of parameter uncertainty.