• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.135-146
• /
• 1993

A ner general multi-layer area router, called DINOSAUR, is presented in this paper. DINOSAUR can route various types of routing areas, such as L-shaped channel, switchbox with/without obstacles, and rectilinear area with/without internal modules/terminals. The DINOSAUR algorithm consists of three major stages: layerless maze routing, layering by coloring, and rip-up and reroute. In layerless maze roution stage, the route of each net is determined by modified maze algorithm without taking the conflicts(short. circuits) into account. In layering by coloring stage, the layer of each net is determinde by a heuristic coloring algorithm. When the conflicts are not removed, rip-up and reroute process is invoded. In rip-up and reroute stage, the conflicts are removed iteratively. Many test cases have been run, and on all the benchmark data known in the literature DINOSAUR has performed either better than or comparable to the other routers.

• 공업화학
• /
• 제8권6호
• /
• pp.1022-1028
• /
• 1997

본 연구에서는 1M $LiClO_4/PC$ 유기 용액 중에 존재하는 리튬 이온의 층간 반응에 의하여 전기 발색 현상을 나타내는 전자-선 증발법으로 제조된 비정질의 텅스텐 산화물 박막과 전해질 계면에서의 전기화학적 특성들을 연구하기 위하여 음극 Tafel 분극법, 순환 전류-전위법 및 전기량 적정법 등의 전기화학 측정법과 X선 회절 분석법을 이용한 박막의 결정 상태 조사 등이 수행되었다. 특히 다중 순환 전류-전위 곡선으로부터 리튬 이온의 층간 반응은 발색 반응에 대한 인가 과전압이 약 1.0V 이내에서는 안정된 소 발색의 가역적 현상을 나타내었으나, 발색 반응에 대한 인가 과전압이 1.5V일 때는 발색 시 삽입된 박막 내부의 리튬이 소색 시 완전히 빠져 나오지 못하여, 박막 내부에 리튬이 축적되는 현상을 나타내었으며, 적은 순환 횟수임에도 불구하고 소 발색의 전류 밀도가 감소되는 것이 조사되어 발색에 필요한 인가 과전압의 한계가 존재함을 알 수 있었다.

• 패션비즈니스
• /
• 제6권3호
• /
• pp.41-51
• /
• 2002

The author of the paper investigated the changes of hairstyle along the developments in hairdressing industry in the 20th century. The development process of hairdressing industry was divided into four periods of introduction, origination, growth, and establishment. The corresponding changes of hairstyle were analyzed and the findings are as follows. 1. Hairstyle could be classified into such typical ones as traditional style, cut, bob, wave, permanent wave, up style, and hair coloring. 2. Fashion leaders affected the changes of hairstyle. 3. Whenever hairdressing appliances were introduced, new hairstyle was practiced as follows with the use of the appliances. (1) Introduction Period - Traditional Style : Chignon, pigtail ribbon $\rightarrow$ Variations were designed in hair length or split due to the limited availability of appliances. - Up Style : Pompadour, thick and up hair, encircling hair $\rightarrow$ Padding was used for sweep-up. (2) Origination Period - Bob Style : Women's first bob style. - Wave style : Wave with bob, close-cropped hair, up style $\rightarrow$ Iron, set, permanent devices were used. (3) Development Period - Wave Style : Wind wave, easily manageable wave $\rightarrow$ Blow dry, body permanent were used. (4) Establishment Period - Straight Style : Use of straight permanent. - Thick Wave Style : Development of various kinds of rod. - Hair Coloring : Advent of diverse fashion hair coloring, apart from the coloring of white hair, with the introduction of color TV. - Bob Style : Romantic bob style $^{\circ}\hat{E}$ Use of clippers and thinning scissors. Thus, the changes of hairstyle according to the development in hairdressing industry had close relationship with the improvement in hairdressing appliances.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.450-455
• /
• 2016

Color change in single-crystal, yellow, red, purple, and colorless cubic zirconias (CZs) was investigated as a function of annealing in vacuum and air atmosphere at $800-1400^{\circ}C$ for 30 min, for development of a damascene process of plugging a precious metal paste at the elevated temperature. Coloring-element contents of the CZs were evaluated using WD-XRF, and the color change determined visually by naked eye, and using a digital camera and UV-Vis-NIR color analyzer. WD-XRF showed that all of the CZs had cubic-phase stabilizer elements and coloring elements. All CZs that underwent vacuum annealing exhibited a slight color change at $<900^{\circ}C$, while their colors began to change to black at $1100^{\circ}C$, and became opaque black at $1400^{\circ}C$. After air annealing, there was almost no color change up to $1400^{\circ}C$. Since red and purple CZs showed greater color difference (CD) values than the others, the degree of CD is likely to depend on the original color of the CZ due to the different stabilities of their coloring elements during annealing. Based on our results, it is suggested that annealing in air at $<900^{\circ}C$ is advantageous, and assorted colored CZs can be used for precious metal damascene.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.422-424
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitizedsolar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes $12\sim24$ hours. In this study, we varied the dye coloring temperature from $0^{\circ}C$ to $60^{\circ}C$. At the temperature of $40^{\circ}C$, DSC cell showed the best performance. We also expect the reduction of the time soaking in a dye. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}$ torr, RF power of 120W and substrate temperature of $100^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.1102-1110
• /
• 2005

본 논문에서는 기존 복셀 칼라링 기법에서의 색상 일관성에 대한 문턱값 문제를 해결하기 위한 개선된 복셀 칼라링 기법을 제안하였다. 제안 기법에서는 표면 복셀에 대한 색상 일관성의 문턱값을 내부 복셀의 색상 일관성 값으로 대체함으로써 복셀 칼라링의 반복 회수가 증가함에 따라 개별 표면 복셀에 대한 최적의 문턱값을 찾아가도록 하였다. 또한 그래프 절단 기법을 적용하여 주위 복셀을 제거 판단에 함께 고려함으로써 표면 잡음을 감소시켰다.

• 한국의류학회지
• /
• 제38권5호
• /
• pp.665-674
• /
• 2014

An analysis of the components of clay mineral before and after coloration (XRF) showed that the elements involved in coloration are Fe, Cr, and Ni. Fe accounts for 65% of coloring components on dyed fabric; in addition, Cr and Ni also affect coloring. The optimal coloration condition was to repeat the process of immersing the cotton fabric in $80^{\circ}C$ slurry of 8g of clay mineral to 1g cotton for 60 minutes, dry it for 24 hours and rinse three times. Especially, as the repetition of coloration increased, the $(K/S)_{440}$ value of sample A increased from 1.0 to 2.5, and sample B increased from 1.0 to 1.6. The effect of the repeated process on coloration was significant; consequently, the rinsing and drying process were important to decrease the coloration level. It also showed excellent results in regard to color fastness to washing, light, rubbing, perspiration, and antibiotic effect.

• 한국콘텐츠학회논문지
• /
• 제8권5호
• /
• pp.52-60
• /
• 2008

위성 통신 분야에서 널리 사용되는 시분할 다중 스위칭 시스템은 많은 저대역폭 가입자들로부터 발생되는 트랙픽을 반복되는 프레임에 타임 슬롯을 할당해야 한다. 본 논문에서는 타임 슬롯 할당을 위한 새로운 방법을 제안한다. 기존의 방법인 네트워크 흐름 모델을 사용하지 않고 새로운 방법인 그래프 채색방법을 사용하여 효율적인 타임 슬롯 할당 알고리즘을 제안하였다. 제안된 알고리즘은 주어진 트래픽의 프레임 길이가 2의 멱승일 경우 트래픽을 정확히 반으로 나누어 할당한다. 분할된 트래픽의 프레임 길이가 1이 될 때까지 이 과정을 계속적으로 반복해 분할한다. 제안된 알고리즘의 시간 복잡도는 프레임의 길이가 L이고 스위치 크기가 N인 경우에는 기존의 네트워크 흐름 모델을 사용한 최적의 타임 슬롯 할당 알고리즘의 시간 복잡도는 $O(N^{4.5})$ 인데 반해 $O(NLlog_2L)$이다.

• 한국항해항만학회지
• /
• 제36권8호
• /
• pp.651-657
• /
• 2012

국내 최초로 대규모 항만재개발이 추진되고 있는 부산북항재개발 사업에서도 항만도시의 경쟁력을 위해 국가차원에서의 경관계획을 반영하고 있으며, 해양도시 이미지 개선 및 가치향상의 과정에서 고유의 자연, 역사, 문화적 자원과 함께 각종시설, 건축물, 상징물, 생태녹지대의 상황과 특성에 맞는 경관조성에 노력을 하고 있다. 본 연구에서는 먼저 부산의 경관의 특성을 분석하고, 부산시도시디자인계획(2010), 특히 색채계획과 해외의 경관색채계획의 사례조사를 수행하였다. 이를 통해 부산북항재개발 사업에서 색채계획을 반영한 경관조성방안을 다루었으며, 그 결과는 향후 다른 재개발사업에서 기초자료로 활용 할 수 있으리라 판단된다.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.325-329
• /
• 2002

We investigated the oxide thickness and color evolution with the oxidation temperatures between $370^{\circ}C$ and $950^{\circ}C$ for 30 minutes in an electric furnace. Oxide thickness and color index were determined by cross sectional field emission scanning electron microscopy (FESEM) images and digital camera images, respectively. We confirmed that thermal oxidation was suitable for the mass production of color-titanium products, while coloring process window was narrow compared with anodizing oxidation process.