• Korean Journal of Veterinary Research
• /
• v.11 no.2
• /
• pp.145-148
• /
• 1971

Serum Samples from adult of Korean cattles including 40 females and 20 males were analyzed by sodium salt precipitation and colorimetric method in the purpose of the determination of total serum protein, albumin, globulin, ${\alpha}$-globulin, ${\beta}$-globulin and ${\gamma}$-globulin. The results obtained arc summarized as follows: 1. Mean value of total serum protein showed a slight variation from 7.6%, and its regional and sex differences were not found to be significant. 2. Contents of albumin in serum showed lower level than that of globulin as low level of A/G ratio 0.4 in proportion. 3. Contents of Serum ${\alpha}$-globulin showed 1.4w/v% and $1.51{\pm}0.46$w/v% in each group of female, and $1.31{\pm}0.26$w/v%, in the group of male. 4. Contents of serum ${\beta}$-globulin showed 1.74w/v%, 1.95w/v%, in each group of female, and 1.82w/v% in the group of male. 5. Contents of serum ${\gamma}$-globulin showed 2.32w/v%, 2.30w/v% in each group of female, and 2.30w/v%, in the group of male.

• Fire Science and Engineering
• /
• v.16 no.4
• /
• pp.77-84
• /
• 2002

In this paper, we had analyzed comsbustion gases using a GASTEC colorimetric gas detector tube according to the method of NES 713 in order to combustion gases toxicity evaluation for beads polystyrene foam, extruded polystyrene foam, rigid polyurethane foam, flexible polyurethane foam, flexible polyvinyl chloride pipe, vinyl floor cover, polyethyelene foam(flame retardant untreated) and polyethyelene foam (flame retardant treated) of plastics material. As results of gas analyses by using this method, comsbustion gases producted from small specimens of plastics material had reached fatal to man at 30 minutes exposure time that had possesed toxicity index of more than 1. Toxicity indexes of each specimen were estimated range of 4.3∼179.2, flexible polyvinyl chloride showed the hightest toxicity index at 179.2, and beads polystyrene foams showed the lowest toxicity index at 4.3.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.64-68
• /
• 2005

An analytical method of nine synthetic foods colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Journal of Food Hygiene and Safety
• /
• v.19 no.4
• /
• pp.171-175
• /
• 2004

An analytical method of nine synthetic food colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.253-259
• /
• 1996

Ammonia microdiffusion method and colorimetric measurement are described for the nitrogen determination. The diffusion of ammonia could be successfully induced by using a microdiffusion cell. It is a simple and rapid technique, which is suitable for transforming the nitrogen in digests into $NH_4CI$ for the colorimetric N determination with ammonia color reagent. Above 99% of N recovery were obtained with microdiffusion up to 15 hours. The coloration method of collected $NH_4CI$ for the colorimetric N determination was also estabilshed with a scanning in U.V. spectrophotometer. Under the proposed coloration method (0.5 mL of sample digest, 4.0 mL of $H_2O$ and 0.5 mL of ammonia color reagent), a maximal absorbance was observed at 410 nm. The kinetic measurement of absorbance showed a high stability from 5 to 45 minutes after color development. Absorbance was directly proportional to the amount of $NH_4^+-N$ present. The microdiffusion-ammonia coloration method was successfully applied to the nitrogen determination in the forms of protein-N or total -N in plant tissue. Comparing with Kjeldahl distillation method, the values obtained with described method were slightly higher and more reliable.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.33-42
• /
• 2009

This study was performed to evaluate the hexavalent chromium content in flexography inks and organic pigments used as colorants for the ink. The digestion of sample was carried out under alkaline condition, and the content of soluble hexavalent chromium extracted from samples was determined by UV-visible colorimetric analysis method after alkaline digestion. Duplicate sampling system to obtain two digested samples, was applied in this study. To determine the hexavalent chromium content in the flexography ink and organic pigment colorimeteric analysis was employed. Because the organic pigment is the main ingredient of flexography ink it is important to remove the errors associated with the colorant of the ink in colorimetric determination. The duplicate sampling system allowed us to correct the errors associated with the colorimeteric measurement. The additional filtration was found an essential step to exclude colorimeteric error derived from the various precipitates. The soluble hexavalent chromium content in flexography inks was generally less than 5 ppm. Yellow, violet and some magenta colors showed higher soluble hexavalent chromium contents. The content of hexavalent chromium in organic pigments was greater than flexography inks, and yellow, violet and some magenta pigments contained greater amount of hexavalent chromium, which indicated that the hexavalent chromium in inks derives from the colorants. The soluble hexavalent chromium content in linerboards were below 1 ppm, and no hexavalent chromium was detected in UKP. Results suggested that flexography ink is the main factor to cause hexavalent chromium in linerboard and organic pigments.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.51-57
• /
• 2009

Since heavy metal pollution is a significant global environmental problem and very dangerous to human health, the improved methods for detecting heavy metals are required recently. Colorimetric chemosensors are now considered as one of the most effective analytical method used in the environment monitoring. New direct dyes having the function of colorimetric chemosensors were synthesized. When metal ions such as $Al^{3+}$, $Ca^{2+}$, $Cd^{2+}$, $Cr^{3+}$, $Cu^{2+}$, $Fe^{2+}$, $Fe^{3+}$, $Hg^{2+}$, $Li^+$, $Mg^{2+}$, $Na^+$, $Ni^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ were added each solution of new direct dyes, the color of solution was changed and can be easily detected with naked eyes without expensive experimental equipment such as atomic absorption spectrometer (AAS) or inductively coupled plasma?mass spectrometer (ICP-MS). The new benzidine analogues were diazotized and reacted with couplers such as H-acid, J-acid, Chromotropic acid, Nevill-winther acid and gamma acid to synthesize new direct dyes. The structures of the new direct dyes were confirmed by high resolution mass spectrometer (FAB ionization) and evaluated with UV-Vis spectroscopy. The UV-VIS spectroscopy was measured for the dye solutions by adding various concentrations of metal ions. It was observed that the absorbance in UV-Vis spectra was changed as the heavy metal ions were added.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.309-314
• /
• 1999

With a view to seek the influence of hollow sphere pigments of latex upon the printed color on coated paper surface, the hollow sphere pigments were compared with filled ones in a variety of experimental approaches. Colloidal properties of latices were determined by measuring zeta potential and particle size distribution. For the amphoteric filled sphere pigment of latex, the polarity was reversed from the negative side to the positive side with decreasing pH. An extraordinarily high peak in the particle size distribution of the amphoteric filled evidenced aggregation between latex particles near the isoelectric point, depending on the electrolyte concentration and pH of the suspending medium. Coated papers containing the hollow sphere pigment in their coating improved optical properties like gloss and brightness. Optical parameters solely of the coating could account for this finding. An equation derived from the Kubelka-Munk equation calculated them fro twice measurements of reflectance of a coated paper over two substrates of different reflectances. This method permitted to predict brightness of coated paper of which coat weight would be different fro the actual one. The colorimetric parameters of solid-printed surfaces of the coated papers closely related to optical and structural properties of the coated papers. The color of the printed surfaces was dominated by the brightness and the smoothness of the coated papers. The hollow sphere pigments were proved to improve optical properties of coated paper and to control minutely colorimetric parameters of printed surfaces.

• Journal of Biomedical Engineering Research
• /
• v.41 no.6
• /
• pp.228-234
• /
• 2020

Superparamagnetic iron oxide nanoparticles (SPIONs) are approved by the Food and Drug Administration (FDA) in the United States. SPIONs are used in magnetic resonance imaging (MRI) as contrast agents and targeted delivery in nanomedicine using external magnet sources. SPIONs act as an artificial peroxidase (i.e., nanozyme), and these reactions were highly stable in various pH conditions and temperatures. In this study, we report a nanozyme ability of the clustered SPIONs (CSPIONs) synthesized by the oil-in-water (O/W) method and coated with biocompatible poly(lactic-co-glycolic acid) (PLGA). We hypothesize that the CSPIONs can have high sensitivity toward H2O2 derived from the reaction between a fixed amount of glucose and glucose oxidase (GOX). As a result, CSPIONs oxidized a 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) commonly used as a substrate for hydrogen peroxidase in the presence of H2O2, leading to a change in the color of the substrate. We also utilized a colorimetric assay at 417 nm using various glucose concentrations from 5 mM to 1.25 μM to validate β-D-glucose detection. This study demonstrated that the absorbance value increases along with increasing the glucose level. The results were highly repeated at concentrations below 5 mM (all standard deviations < 0.03). Moreover, the sensitivity and limit of detection were 1.50 and 5.44 μM, respectively, in which CSPIONs are more responsive to glucose than SPIONs. In conclusion, this study suggests that CSPIONs have the potential to be used for glucose detection in diabetic patients using a physiological fluid such as ocular, saliva, and urine.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.403-424
• /
• 1996

Cell culture methods have been used to assess the cytotoxicity of dental materials. Different paramaters are used to monitor cytotoxic effects. But it is difficult to compare each investigator's results with different methods. The objective of this study was to investigate cytotoxic effect of several retrograde filling materials according to cell lines and assay methods. Cytotoxicity of Bestalloy (Dogmyung, Korea), Prisma APH(Densply International Inc., U.S.A.), Clearfil FII (Kuraray Co., Japan), Fuji II (GC Co., Japan), Fuji II LC (GC Co., Japan) and IRM (Densply Co., U.S.A.) on L929, 3T3 and KB permanent cell lines was measured. Radiochromium, Lactate dehydrogenase (LDH) release method and colorimetric assays, namely neutral red (NR) and MTT were used. Each material was mixed according to the manufacturer's instruction. They were tested as solid and extracted state. Cell culture media were added to each mixed or solid materials then the solution was collected and used as extract solutions. Solid Fuji II showed mild cytotoxicity on three cell lines using radiochromium release method. There was no difference in cytotoxicity of extract solution group using radiochromium release method. In colorimetric assay immediate Fuji II group and all the IRM groups showed severe cytotoxic effect. Difference in cyctotoxicity was due to rather kinds of cell lines than assay methods. Solid Fuji II and IRM showed mild cytotoxicity on three cell lines. But extract solutions had different cytotoxic effect according to cell lines using LDH release assay. Light-cured glass ionomer had mild to moderate degree of cytotoxicity on three cell lines. Cytotoxicity was affected by specimen prepaton. Susceptibility of each cell ines were also affected by assay emthods. It was suggested that cytotoxicity study using only one cell line and/or assay method might not accurately reflect the real toxic nature of dental biomaterials.