An area under construction for a living facility collapsed around 12:48 KST on 13 January 2021 in Sa-dong, Ansan-si, Gyeonggi-do. There were no casualties due to the rapid evacuation measure, but part of the temporary retaining facility collapsed, and several cracks occurred in the adjacent road on the south side. This study used the potential of synthetic aperture radar (SAR) satellite for surface property changes that lies in backscattering characteristic to map the collapsed structure. The interferometric SAR technique can make a direct measurement of the decorrelation among different acquisition dates by integrating both amplitude and phase information. The damage proxy map (DPM) technique has been employed using four high-resolution Constellation of Small Satellites for Mediterranean basin Observation (COSMO-SkyMed) data spanning from 2020 to 2021 during ascending observation to analyze the collapse of the construction. DPM relies on the difference of pre- and co-event interferometric coherences to depict anomalous changes that indicate collapsed structure in the study area. The DPMs were displayed in a color scale that indicates an increasingly more significant ground surface change in the area covered by the pixels, depicting the collapsed structure. Therefore, the DPM technique with SAR data can be used for damage assessment with accurate and comprehensive detection after an event. In addition, we classify the amplitude information using support vector machine (SVM) and maximum likelihood classification algorithms. An investigation committee was formed to determine the cause of the collapse of the retaining wall and to suggest technical and institutional measures and alternatives to prevent similar incidents from reoccurring. The report from the committee revealed that the incident was caused by a combination of factors that were not carried out properly.
본 연구에서는 조선 후기 기록화인 《평안감사향연도》 총 3점 중 <연광정연회도>를 분석하여 채색 재료를 규명했다. 포인트 위주의 분석으로 인해 발생 가능한 문제를 최소화하고자 우선 파장별 이미지를 촬영했다. 엑스선을 통해 먹, 금, 유·무기 안료를 분류했고, 적외선으로 먹과 구리계 안료를 파악했다. 초분광으로는 흑색, 청색, 녹색 재료 중에서 안료와 유기 염료를 구별해냈다. 색상별 선정 지점을 분석하여 백색(연백), 흑색(먹/쪽), 적색(연단+진사), 분홍색(염료), 자주색(염료), 갈색(산화철), 황색(석황/염료), 녹색(석록/석록+염료/쪽)과 청색(석청/연백+쪽/쪽), 자색(쪽+연지), 금색(금박) 등의 재료를 규명했다. 향후 파장별 라이브러리가 확보되면 더 효율적인 분석이 가능할 것으로 기대된다.
Large amounts of additives are used during meat product processing to maintain product quality and shelf life. With the growing interest in healthy foods, natural plant-based additives are being used as alternatives to synthetic additives. In this study, six types of natural extracts with excellent antibacterial activity were selected, and their antibacterial and antioxidant activities against four types of pathogens were evaluated in various combinations. In addition, the pH, color, amount of thiobarbituric acid reactive substances (TBARS), and growth of pathogenic microorganisms were analyzed during the storage of sausages treated with various combinations of these extracts. The natural extract mixtures exhibited different antibacterial activities, depending on the combination. Compared to grapefruit seed extract, a mixture of natural extracts extracted with ethanol (M4) reduced the Escherichia coli content by more than 99.9% after 8 days of storage and slowed the growth of Listeria monocytogenes and Salmonella spp. by more than 80% after 14 days. Compared to untreated (NC) and grapefruit extract (PC)-treated sausages, sausages treated with the natural extract mixtures showed a significant decrease in CIE L* and an increase in CIE a* and CIE b* (p < 0.05). The pH value was significantly lower in sausages containing natural extract mixtures than in the NC and PC sausages (p < 0.05). The natural plant extract mixtures significantly prevented lipid oxidation (p < 0.05). In summary, different types of natural extract mixtures have a synergistic effect when used together, suggesting that natural preservatives can generally inhibit the growth of microorganisms and oxidation of processed meat.
본 연구에서는 심미적 기능의 오브제로서의 공예와 공간에서 실용적 기능으로서의 소재를 융합한 가구디자인으로 공간에서의 새로운 역할을 부여하기 위한 시도에 그 목적이 있다. 따라서 가구디자인은 목재와 도자 소재의 융합적 시도로서 그것이 가진 가치와 가능성을 보여준다. 연구의 범위와 방법은 도자인 예술 분야와 목공이라는 디자인 분야의 다른 재료 및 소재의 혼합과 연결되어 있다. 도자로 제작된 다리와 월넛 나무로 제작된 상판의 전혀 다른 소재가 어우러지도록 융합되어 제작한다. 직접 가구를 제작함에 있어 도자기가 쌓아진 형식을 차용한 도자 다리를 제작하여 시각적으로 제한된 기존 가구디자인과 차별된 디자인을 창출하고, 흙과 유약에서 보이는 색감과 질감으로 나무에서 얻을 수 없었던 색다른 느낌을 보여주어 가구와 그것이 놓인 공간의 신선한 어울림을 기대한다. 포스트모던 이후 디자인과 예술의 경계가 모호해지고 있다. 본 연구를 통해 가구 상판에 기능과 형상을 자유롭게 조화시킬 수 있는 개념의 현대의 다양성 그리고 가구와 오브제와의 역할에 대한 경향을 고려한 디자인을 제안하고자 한다.
Objective: This study was performed to evaluate the quality characteristics of pork sausage (PS) with sea tangle extract (STE) and rapid chilled pre-rigor muscle (RCPM) for the development of reduced-salt low-fat sausage. Methods: Pre- and post-rigor pork ham muscles were prepared to process PSs. Positive control (reference, REF) using post-rigor muscle were manufactured at a regular-salt level of 1.5%. Fresh and rapid-chilled pre-rigor muscle (FPM and RCPM) were used to manufacture reduced-salt sausages with 0.8% salt. Reduced-salt PSs were prepared with four treatments: FT1 (FPM alone), FT2 (FPM with 5% STE), RT1 (RCPM alone), and RT2 (RCPM with 5% STE). The physicochemical and textural properties of the sausages with reduced-salt levels and RCPM combination were measured to determine if the characteristics of RCPM were similar to those with FPM. Results: The pH values of PS with FPM and RCPM were higher than those of REF with post-rigor muscle. Color values (L*, a*, b*) were not affected by different rigor-states and salt addition level. Textural properties of reduced-salt PSs were similar to those of REF due to the improved functionalities of pre-rigor muscle. RT2 had lower expressible moisture (%) than other treatments with post-rigor muscle and RCPM except for RT1. Conclusion: The addition of STE and RCPM to reduced-salt PS increased the water-holding capacity, which was lower than those of PS with STE using RCPM but similar to those of regular-salt sausage.
This study aims to use Art brut works-the artwork of the socially underprivileged and alienated-to influence social roles in fashion design, employing a formative expression method to promote social acceptance of diversity in the industry. The research method involved investigating Art brut's concept and evolution in domestic and foreign literature and previous studies. The formative characteristics of the movement were derived by analyzing the works of Art brut artist Johann Hauser. One hundred and twenty images of Johann's work were collected through online sources like the Gugging Museum's website, Christian Berst Gallery's website were developed as fashion design using the CLO 3D program. The formative characteristics of Johann's works appeared to be transparent overlapping, divisional decorativeness emphasized simplicity, and vibrant chromaticity. Based on this analysis, the results of the 3D digital fashion designs were as follows. First, the characteristics of the atypical objects and figures in Johann's works were applied to the design silhouette, revealing a uniquely beautiful form. Second, Johann used a method in which numerous line shapes overlap and fill the area. The point of connecting the work is expressed as a graphic pattern by decorating the lines of the hem and hem of the garment with piping or attaching overlapping straps on top of pants and dresses. Third, the combination of overlapping colors used in Johann's work is a color block design of fashion, which utilizes the formative fun.
Gaining an accurate 3D stream geometry has become feasible with Unmanned Aerial Vehicle (UAV), which is crucial for better understanding stream hydrodynamic processes. The objective of this study was to investigate series of filters to remove stream vegetation and propose the best method for generating Digital Terrain Models (DTMs) using UAV-based point clouds. A stream reach approximately 500 m of the Bokha stream in Icheon city was selected as the study area. Point clouds were obtained in August 1st, 2023, using Phantom 4 multispectral and Zenmuse L1 for Structure from Motion (SfM) and Light Detection And Ranging (LiDAR) respectively. Three vegetation filters, two morphological filters, and six composite filters which combined vegetation and morphological filters were applied in this study. The Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were used to assess each filters comparing with the two cross-sections measured by leveling survey. The vegetation filters performed better in SfM, especially for short vegetation areas, while the morphological filters demonstrated superior performance on LiDAR, particularly for taller vegetation areas. Overall, the composite filters combining advantages of two types of filters performed better than single filter application. The best method was the combination of Progressive TIN (PTIN) and Color Indicies of Vegetation Extraction (CIVE) for SfM, showing the smallest MAE of 0.169 m. The proposed method in this study can be utilized for constructing DTMs of stream and thus contribute to improving the accuracy of stream hydrodynamic simulations.
본 연구는 위성영상을 이용하여 객체기반 토지피복 분류도를 구축하고 공간통계기법을 통하여 토지피복의 분류항목별 분포패턴을 파악하였다. 객체기반 분류는 분광정보, 질감정보, 분광정보와 질감정보의 조합에 의하여 각각의 토지피복 분류도를 구축하였으며, 정확도 평가를 통하여 최적의 토지피복 분류도를 선정하였다. 또한, 토지피복의 분류항목별 공간적 분포패턴을 파악하기 위하여 핫스팟 분석을 실시하여 정량화하였다. 객체기반 분류를 위한 최적의 가중치는 Scale 52, Shape 0.4, Color 0.6, Compactness 0.5, Smoothness 0.5로 선정하였다. 토지피복 분류도는 분광정보와 질감정보의 조합을 사용하였을 때, 전체 분류정확도가 가장 높았으며, 특히 밭과 시설재배지, 나지의 경우 분광정보만을 사용하였을 때 보다 정확도가 약 12% 이상 증가하였다. DMZ일원의 분류항목별 면적비율은 산림 > 논 > 교통시설 > 초지 > 밭 > 나지 > 건물 > 수역 > 시설재배지 순으로 높았으며, 특히, 양구군의 밭과 교통시설은 민간인통제선 이북지역, 철원군의 밭, 인제군의 산림과 교통시설은 민간인통제선 이남지역에서 주로 분포하는 것으로 나타났다. 분류항목별 분포 패턴의 경우, 농업과 관련된 논, 밭, 시설재배지의 핫스팟(hot spot)은 철원군의 평야 지역과 양구군의 분지 지역에 집중 분포하였다. 나지, 수역, 건물, 도로의 핫스팟 지역은 농업과 관련된 핫스팟 지역과 분포 패턴이 유사한 반면, 산림과 초지의 핫스팟 지역과는 분포 패턴이 상이하였다.
본 연구는 희토 성분인 Ce(cerium)과 La(lanthanium)의 단독 또는 혼합 급여가 실용 육계의 생산성, 영양소 소화율, 골격성분, 그리고 도체 성상과 육색에 미치는 영향을 조사하기 위하여 1일령 Hubbard종 암평아리(체중 45 g) 1,600수를 공시하여 4처리 4반복으로 반복당 100수씩 완전 임의 배치하였다. 4개 처리구는 T1, 무첨가 대조구; T2, Ce 100 ppm 첨가구; T3, La 100 ppm 첨가구; T4, Ce 100 ppm과 La 100 ppm 혼합 첨가구로 하였으며, 전기(0~3주)와 후기(4~5주)로 나누어 5주간의 사양 시험을 실시하였다. 전기의 증체량은 T4에서 다른 처리구에 비하여 다소 높았으며, 대조구에 비해서는 유의하게 높았다(p<0.05). 전체 기간에서도 T4의 증체량이 가장 높았지만 통계적 유의성은 인정되지 않았다(p>0.05). 사료 섭취량은 각 단계 및 전체기간에서 처리구간 유의적인 차이가 나타나지 않았다(p>0.05). 사료 요구율은 전기에서 T4가 T3에 비하여 개선되었으며(p<0.05), 후기에는 각 처리간에 차이가 없었지만(p>0.05) 전체기간으로 볼 때 T4가 대조구에 비하여 유의적으로 개선되었다(p<0.05.). 소화율에서 건물 소화율은 T3에서 가장 높았으며(p<0.05) T2와 T4도 대조구에 비하여 개선되었다(p<0.05). 조단백질 소화율은 T3가 가장 높았으며(p<0.05), T2에서도 대조구에 비해 개선되었다(p<0.05). 조회분, 에너지, 칼슘과 인의 소화율도 T3에서 가장 높게 나타났다(p<0.05). 뼈의 성분 분석에서 칼슘의 함량은 Ce과 La을 급여한 처리구가 대조구에 비해 높게 나타났지만 처리구간 유의적인 차이는 나타나지 않았으며(p>0.05), 도체 성상 조사와 육색의 측정에서도 처리구간 유의적인 차이는 나타나지 않았다(p>0.05). 본 연구의 결과, 육계 사료내 La의 첨가는 영양소 소화율을 뚜렷하게 개선하였다. 또한 육계 사료내 Ce과 La의 첨가는 육계의 소화율을 개선시켰으며, 육성 초기의 증체량과 사료 요구율 개선에 효과가 있는 것으로 판단된다.
무균포장밥 제조시 탈산소제와 EVOH필름을 사용하지 않은 처리구는 무균포장밥에는 적합하지 않은 것으로 판명되었으며, 무균포장밥을 OPP/EVOH/EPL(P-1), PET/EVOH/EPL(P-2) 및 OPP/EVOH/LLDPE(P-3)의 포장재질과 FX 및 TSQ의 탈산소제를 이용하여 제조한 후 저장 온도 $20^{\circ}C,\;30^{\circ}C,\;40^{\circ}C$에서 저장 중 품질 변화를 조사하였다. 무균포장밥의 품질을 평가하기 위하여 수분, 색도, pH, 산도 경도 및 총균수를 기간별로 측정하였다. 수분은 저장기간이 증가함에 따라 서서히 감소하는 경향이었으나 저장 온도에 따라 큰 차이를 보이지 않았고, 리드 포장재로 P-2와 FX type 탈산소제를 사용한 처리구의 수분 증발이 가장 낮았다. 저장중 색도의 변화는 모든 처리구에서 L 값은 서서히 감소하는 경향이었으나 a 값은 서서히 증가하였다. 리드 포장재로 P-2와 탈산소제는 FX type을 사용한 처리구의 색도 변화가 적어 품질이 가장 양호하였다. 저장중 pH와 산도의 변화는 P-3 포장재에서 pH는 저장 60일 후 5.5 이하까지, 산도는 20 이상으로 증가하였으나 나머지 처리구는 큰 변화를 보이지 않았다. 무균포장밥의 경도 변화는 저장온도가 증가할수록 낮은 경향을 나타내었으며 포장재 및 탈산소제의 종류에 따른 경도의 변화는 나타나지 않았다. 한편 60일 저장 후 총균수의 변화를 조사한 결과 $20^{\circ}C$와 $30^{\circ}C$ 저장 온도에서는 저장 기간에 따라 리드 포장재나 탈산소제의 종류에 관계없이 전 처리구에 걸쳐 미생물이 검출되지 않았으나 $40^{\circ}C$ 저장구에서는 저장 60일 후에는 $10^6\;CFU/g$ 이상을 나타내었다. 이상의 결과를 종합하여 보면 무균포장밥의 상온 유통은 6개월까지 가능하였으며 탈산소제의 종류보다는 리드포장재의 재질이 무균포장밥의 품질에 미치는 영향이 더 큰 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.