• 전자공학회논문지T
• /
• 제35T권2호
• /
• pp.20-27
• /
• 1998

HSV색공간을 이용한 칼라화상의 클러스터링 및 색차평가에 관한 연구(A Study on Clustering and Color Difference Evaluation of Color Image using HSV Color Space) pp.20~27 칼라화상을 화상부호화, 리모트 센싱, 컴퓨터비젼 등의 분야에 이용하기 위해서는 인간이 감각적으로 취급하기 쉬운 색공간으로 화상정보를 변환시켜야 한다. 색상, 명도, 채도를 근거로한 Munsell색공간은 인간의 색지각과 영역간의 색차가 일치하는 특징으로 인하여 칼라화상의 클러스터링에 이용되고 있다. 본 논문에서는 RGB입력화상을 ${L^*}{a^*}{b^*}$ 균등색공간으로 변환하고, 색지각과 일치되는 HSV색공간으로 근사화시킴으로써, 각 좌표축을 중심으로 클러스터링과 그 색차를 평가한다. 자기수렴 특성을 갖는 ISO DATA 알고리즘을 응용하여 HSV칼라화상의 영역을 분할하고, 과분할된 영역을 통합하는 방법을 제안하였다. 두 종류의 입력화상에 대한 클러스터링을, 색차를 기본으로 한 임계값에 따라 수행하므로써 화상내용의 복잡함에 대응하는 양호한 영역분할 결과를 제시하였다.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.672-679
• /
• 2013

$Fe_4[Fe(CN)_6]_3$ coated on a mica or $TiO_2$/mica surface as infrared reflective blue pigment was prepared by a hydrothermal method. $Fe_4[Fe(CN)_6]_3$, used as coloring agent, was uniformly coated on mica or $TiO_2$/mica under the optimized condition of a 1.2 : 1 weight ratio between iron(III) chloride hexahydrate and potassium ferrocyanidetrihydrate at the initial pH level of 4.5 at $70^{\circ}C$. The infrared (IR)-reflective pigments were characterized by SEM, Zeta-potenial, FT-IR, and UV-VIS NIR spectrophotometry. Especially the CIE color coordinate and total solar reflectance(TSR) properties of the pigments were investigated in relation to variation of the coating and coated substrate thicknesses. Isolation-heat paint was prepared with 20 wt% blue pigments fully dispersed in acryl-urethane resin and several additives to coat the film uniformly. The films were also measured with CIE color coordinate, TSR, and the surface temperature was recorded by an isolation-heat measuring system. The pigments and films of $Fe_4[Fe(CN)_6]_3$ coated on mica and $TiO_2$/mica showed high TSR values compared with the TSR value of $Fe_4[Fe(CN)_6]_3$ itself. According to the increase of TSR value, the property of isolation-heat is effective. To realize the optimal blue color, we applied the the pigment to $TiO_2$ coated mica(TM(b)) which has blueish interference color. The pigment of $Fe_4[Fe(CN)_6]_3$ coated on TM(b) shows a strong blue color compared with that of $Fe_4[Fe(CN)_6]_3$ coated on $TiO_2$/Mmca(TM(w)), which has a whitish interference color.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.19-23
• /
• 2007

The blue emitting OLEDs using TMP-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl) phosphonate] host and DJNBD-1 dopant have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum thermal evaporation method. Followed by the deposition, blue color emission layer was deposited using TMP-BiP as a host material and DJNBD-1 as a dopant. Finally, small molecule OLEDs with structure of $ITO/2-TNATA/NPB/TMP-BiP:DJNBD-l/Alq_3/LiF/Al$ were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. The effect of dopant into host material of the blue OLEDs was studied. The blue OLEDs with DJNBD-1 dopant showed that the maximum current and luminance were found to be about 34 mA and $8110\;cd/m^2$ at 11 V, respectively. In addition, the color coordinate was x=0.17, y=0.17 in CIE color chart, and the peak emission wavelength was 440 nm. The maximum current efficiency of 2.15 cd/A at 7 V was obtained in this experiment.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.262-269
• /
• 2013

PURPOSE. Perceived color of ceramics changes by the spectral power distribution of ambient light. This study aimed to quantify the amount of shifts in color and color coordinates of clinically simulated seven all-ceramics due to the switch of three ambient light sources using a human vision simulating spectroradiometer. MATERIALS AND METHODS. CIE color coordinates, such as $L^*$, $a^*$ and $b^*$, of ceramic specimens were measured under three light sources, which simulate the CIE standard illuminant D65 (daylight), A (incandescent lamp), and F9 (fluorescent lamp). Shifts in color and color coordinate by the switch of lights were determined. Influence of the switched light (D65 to A, or D65 to F9), shade of veneer ceramics (A2 or A3), and brand of ceramics on the shifts was analyzed by a three-way ANOVA. RESULTS. Shifts in color and color coordinates were influenced by three factors (P<.05). Color shifts by the switch to A were in the range of 5.9 to 7.7 ${\Delta}E{^*}_{ab}$ units, and those by the switch to F9 were 7.7 to 10.2; all of which were unacceptable (${\Delta}E{^*}_{ab}$ > 5.5). When switched to A, CIE $a^*$ increased (${\Delta}a^*$: 5.6 to 7.6), however, CIE $b^*$ increased (${\Delta}b^*$: 4.9 to 7.8) when switched to F9. CONCLUSION. Clinically simulated ceramics demonstrated clinically unacceptable color shifts according to the switches in ambient lights based on spectroradiometric readings. Therefore, shade matching and compatibility evaluation should be performed considering ambient lighting conditions and should be done under most relevant lighting condition.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.9-14
• /
• 1999

삼파장 형광등의 제작에서 문제가 되는 것은 원하는 목표 색을 맞추기 위하여 혼합하는 세 가지 형광물질의 혼합비율이다. 한 형광체의 광 스펙트럼이 약간 변형되거나, 공정변수에 의하여 변경되거나, Ar과 Kr 같은 불활성가스의 스펙트럼이 혼재하거나 또는 재래 할로인산칼슘이 공존할 경우 원하는 정확한 색을 찾기가 매우 힘들어지게 된다. 이 연구에서는 원하는 목표 색을 빠르게 찾는 방법을 연구하였다. 세 개의 각각의 단일색의 형광등과 3색을 서로 다른 비율로 혼합한 형광등을 만들고 각각의 스펙트럼을 측정한 후 이로부터 알곤과 수은의 스펙트럼을 빼서 변형 색 좌표를 얻었다. 이 변형 색 좌표로부터 적생에 대한 청색과 녹색의 광속비를 그의 무게 비에 대하여 도시하여 무게 대 광속비의 관계를 구하였다. 이 관계식을 이용하여 생산라인에서 삼파장 형광체의 단일 도포 및 할로인산칼슘을 1차로 도포하는 2중 도포를 실시하여 목표색을 조합해본 결과 만족할만한 결과를 얻었다.

• 조명전기설비학회논문지
• /
• 제26권1호
• /
• pp.15-21
• /
• 2012

In this study, the characteristics of the 2-wavelength white organic light-emitting diod (WOLED) with two colors of yellow and blue were compared and analyzed with 3-wavelength WOLED with three colors of red, green, and blue. The results indicated that the power efficiency of the 2-wavelength WOLED was 1.6 times higher than 3-wavelength WOLED. In addition, the colot coordinate of the 2-wavelenth WOLED which was (0.34, 0.39) was found closer to the optimal color coordinate for the white-lighting application when compared with that of the 3-wavelength WOLED.

• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.13-24
• /
• 1995

The color filter os made in four methods ; dyeing, printing electrodisposition and pigment dispersed method. Among technologies for color filter manufacture, pigment-dispersed and hybrid method are dominant over all others in commercial manufacture of large scale, fine resolution color filter for liquid crystal display. In this paper to investigate the possibility of the color filter manufacture for LCD by screen printing method, we synthesyzed PVA/sbQ screen emulation for high resolution, estimated image of printed fine pattern and manufactured color filter by screen printing. Results of the study are as follow and found the screen printing method os useful and valid from it. 1. Fine pattern is formed due to photocyclodomerization of -C=C- bond at 342nm, on the other hand unexposured parts are removed in water. 2. sharpness and resolution of fine pattern is improved at mesh streching angle 22.5 and 45 than 0 degree. It is expected due to resistance between inks and mesh streching angles. 3. Spectral characteristics of sample inks were R(640nm), G(535nm), B(470nm), transmittance were R(92%), G(79%), B(70%) and chromaticity coordinate values were R(0.62,0.33), G(0.32,0.59), B(0.14,0.17)

• 정보처리학회논문지B
• /
• 제9B권4호
• /
• pp.491-500
• /
• 2002

본 논문에서는 칼라 얼굴 영상으로부터 피부색 정보, 얼굴의 기하학적 특징벡터 및 안면각 정보를 이용한 실시간 얼굴검출 및 인식 알고리즘을 제안하였다. 제안한 알고리즘에서는 HSI 칼라좌표계상의 얼굴 피부색 정보와 얼굴 에지 정보를 함께 이용함으로써 얼굴 영역 검출 효율을 개선하였다. 또한 추출된 얼굴 영역으로부터 얼굴인식율 개선을 위해 얼굴 특징자들을 추출하고 추출된 얼굴 특징자들의 기하학적 관계로 구성된 얼굴 특징벡터와 얼굴 안면각 정보를 사용하여 얼굴 인식율을 개선하였다. 실험에서는 제안한 방법이 기존의 방법에 비해 얼굴 영역 검출율 뿐만 아니라 얼굴 인식율도 개선되었음을 알 수 있다.

• 한국전자통신학회논문지
• /
• 제11권1호
• /
• pp.107-112
• /
• 2016

나사는 산업의 모든 분야에서 널리 사용되는 중요한 부품이다. 최근에는 여러 가지 필요에 의해 다양한 칼라 나사가 출시되고 있다. 이에 따라 제조 공정상에서 실시간 품질 검사가 요구되고 있다. 본 논문에서는 칼라 정보와 동적 계획법(Dynamic Programming) 알고리듬을 이용한 칼라 나사 검사를 위한 표면 영역 자동 추출 알고리듬에 대해 다루도록 한다. 나사의 외곽 경계는 칼라 성분의 차이를 이용하여 보다 강인한 검출이 가능하도록 한다. 나사의 내부 경계는 직교 좌표계를 극좌표계로 변환후 흑백 이미지상에서 일정 영역의 밝기값 차이를 이용한 동적 계획법을 적용하여 추출하도록 한다. 실험에서는 동일한 인자값을 이용한 결과를 분석하도록 한다.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.111-124
• /
• 2013

The purpose of this research was to conduct a comparison analysis of color in the characteristics and image of Korea/China/Japan airline uniforms. Research subjects for this research included 19 Korean, Chinese and Japanese airlines servicing the Incheon International Airport in South Korea. The analysis methods are based on the Munsell Color Order System and PCCS (Practical Color Coordinate System) tone classification in order to examine the color characteristics. For the color image analysis, the present research performed a positioning on Shigenobu Kobayashi's color images scale with adjectives in order to compare the resulting differences. As a result of the analysis, this research discovered the following; First, achromatic colors were found to be used most frequently in flight attendant uniforms of Korea/China/Japan. In Korean flight attendant uniforms, YR/Y, GY and B/PB/P; in Chinese, R/PB, RP, YR/Y/GY and BG/P; in Japanese, RP, R/P/PB and Y/BG were found in order. As for the main uniform colors, Korean flight attendant uniforms were found to be in the colors YR, and R/GY/B/P; Chinese flight attendant uniforms, R, PB, and P/B; and Japanese flight attendant uniforms, R, BG, B, RP and N. Second, Korean flight attendant uniforms used W and It most frequently; China flight attendant uniforms, W; and Japanese flight attendant uniforms, W and v. Regarding the main colors, Korean flight atteddant uniforms used lt/g and v/p; Chinese flight attendant uniforms, v, dp and s/d/dkg; and Japanese flight attendant uniforms, v/dkg and Bk. Third, after positioning each country's uniform color combination bars on the Kobayashi image scale, Korean flight attendant uniforms showed classic images along with casual/pretty/elegant/chic images; Chinese flight attendant uniforms displayed, casual images as well as, dynamic/gorgeous/chic/cool casual/dandy images; and finally, Japanese flight attendant uniforms converyed dandy images along with casual/gorgeous images. This research findings indicate that Korea/China/Japan airlines' flight attendant uniforms seek for differentiated image establishment by reflecting their own CIs and unique national cultures in the uniform color marketing.