• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1788-1795
• /
• 2017

In this paper, we proposed a service that provides CPA/TCPA information to ships, without ARPA/ATA devices to support decision making of the navigator for maritime safety based on various services at shore and off-shore. To verify the proposed service, we use SiNAS (scenario-based simulator for NAS) with CPA/TCPA information providing software to evaluate its usability, because executing the test in real ship has many limitations and difficulties. To do this, we specify two simulation scenarios for the required purpose, and we liaise twelve participants with various navigation experience to conduct the simulations. Also, we analyze the results of simulation using mission success or not, the minimum approaching distance with the target ship, the time of a recognition the target ship, the time of a first action for collision avoidance with the target ship, and so on. Then, we evaluate usability of the proposed service based on the three elements which are effectiveness, efficiency and satisfaction.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.339-438
• /
• 2002

This paper presents a method to simulate noise propagation by a computer for outdoor environment. Sound propagated in 3 dimensional space generates reflected waves whenever it hits boundary surfaces. If a receiver is away from a sound source, it receives multiple sound waves which are reflected from various boundary surfaces in space. The algorithm being developed in this paper is based on a ray sound theory. If we get 3 dimensional geometry input as well as sound sources, we can compute sound effects all over the boundary surfaces. In this paper, we present two approaches to compute sound: the first approach, called forward tracing, traces sounds forwards from sound sources. while the second approach, called geometry based computation, computes possible propagation routes between sources and receivers. We compare two approaches and suggest the geometry based sound computation for outdoor simulation. Also this approach is very efficient in the sense we can save computational time compared to the forward sound tracing. Sound due to impulse-response is governed by physical environments. When a sound source waveform and numerically computed impulse in time is convoluted, the result generates a synthetic sound. This technique can be easily generalized to synthesize realistic stereo sounds for virtual reality, while the simulation result is visualized using VRML.

• Explosives and Blasting
• /
• v.37 no.3
• /
• pp.13-24
• /
• 2019

This paper was prepared to investigate the behavior of fragments in underwater torpedo explosion beneath a frigate or surface ship by using an explicit finite element analysis. In this study, a fluid-structure interaction (FSI) methodology, called the multi-material arbitrary Lagrangian-Eulerian (MM-ALE) approach in LS-DYNA, was employed to obtain the responses of the torpedo fragments and frigate hull to the explosion. The Euler models for the analysis were comprised of air, water, and explosive, while the Lagrange models consisted of the fragment and the hull. The focus of this modeling was to examine whether a worst-case fragment could penetrate the frigate hull located close (4.5 m) to the exploding torpedo. The simulation was performed in two separate steps. At first, with the assumption that the expanding skin of the torpedo had been torn apart by consuming 30% of the explosive energy, the initial velocity of the worst-case fragment was sought based on a well-known experimental result concerning the fragment velocity in underwater bomb explosion. Then, the terminal velocity of the worst-case fragment that is expected to occur before the fragment hit the frigate hull was sought in the second step. Under the given conditions, the possible initial velocities of the worst-case fragment were found to be very fast (400 and 1000 m/s). But, the velocity difference between the fragment and the hull was merely 4 m/s at the instant of collision. This result was likely to be due to both the tremendous drag force exerted by the water and the non-failure condition given to the frigate hull. Anyway, at least under the given conditions, it is thought that the worst-case fragment seldom penetrate the frigate hull because there is no significant velocity difference between them.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.667-678
• /
• 2023

In this study, quasi-3D inundation flow simulations were conducted for a simplified subway station configuration. The effects of variations in rainwater inflow locations and discharge were investigated, analyzing the resulting inundation flow patterns and flood risk. The inundation simulation results calculated the incipient velocities for slipping and toppling accidents to assess pedestrian safety. The results indicated that velocities exceeding the incipient velocity for slipping accidents mainly occurred on the flooded staircase. Meanwhile, velocities surpassing the incipient toppling accidents were observed around the staircase and the corridor near the staircase leading to B2F. This observation is consistent with the results from the specific force distribution analysis. To provide detailed flood risk assessments, the Flood Hazard Degree (FD) was applied with four levels of criteria, along with the Flood Intensity Factor (FIF). The results demonstrated that FD identified a broader area at risk of flood-induced consequences compared to FIF. When comparing the different inundation risk assessment methods, the specific force method tended to overestimate the risk area, whereas FIF tended to underestimate it. Furthermore, among all assessment methods, the influence of rainwater discharge was found to have a more dominant effect on flood risk assessment compared to the number of rainwater inflow locations. Additionally, the direction of inundation flow influenced the assessed risk, with collision-induced flow patterns leading to higher flood risk than those with identical flow directions.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.123-134
• /
• 2008

Since the end treatments of guardrails installed on domestic roads have the shapes which can easily penetrate and turnover a vehicle, the occupant can be subjected to severe injury when a vehicle impacts the end treatments. In this study, the criteria of performance evaluation for end treatments are suggested which are suitable to domestic road circumstances. Based on the investigation for the installation and studies instances of end treatments, the mechanism of end treatments is examined and the new end treatment suitable to domestic road circumstances is suggested. The suggested end treatment was verified by computer simulation using d LS-DYNA programs and satisfied the suggested performance evaluation criteria for end treatments. And the developed end treatment was verified by full-scale vehicle crash test and satisfied the following three primary appraisal factors of the suggested performance evaluation criteria for end treatments; occupant risk criteria, structural adequacy, and after-collision vehicle trajectory. This study is the first to develop end treatments considering the occupant safety in Korea. Therefore, If the developed end treatments is installed on roads and highways, it can be expected that it will reduce the grave situation of end treatment accidents and increase the safety of roads.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.63-69
• /
• 2014

For the safety messages in IEEE 802.11p vehicles network environment(WAVE), strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. WAVE standards apply multiple radios and multiple channels to provide open public road safety services and improve the comfort and efficiency of driving. Although WAVE standards have been proposed multi-channel multi-radio, the standards neither consider the WAVE multi-radio environment nor its effect on the beacon broadcasting. Most of beacon broadcasting is designed to be delivered on only one physical device and one control channel by the WAVE standard. also conflict-free channel assignment of the fewest channels to a given set of radio nodes without causing collision is NP-hard, even with the knowledge of the network topology and all nodes have the same transmission radio. Based on the latest standard IEEE 802.11p and IEEE 1609.4, this paper proposes an interference aware-based channel assignment algorithm with Nash bargaining solution that minimizes interference and increases throughput with wireless mesh network, which is deigned for multi-radio multi-cahnnel structure of WAVE. The proposed algorithm is validated against numerical simulation results and results show that our proposed algorithm is improvements on 8 channels with 3 radios compared to Tabu and random channel allocation algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.730-742
• /
• 2014

In the case of On-demand routing protocol in cognitive radio ad-hoc networks, broadcasting of control packets may occur common control channel overload and packet collisions during the routing procedure. This situation is to increase the overhead of path finding and also limited to find the accurate and reliable path. Since reliable channel and path finding is restricted, path life time is shorten and path reliability is reduced. In this paper, we propose a new routing algorithm that reduces control channel overhead and increases path life time by considering the probability of appearance of primary user and channel status of neighbor nodes. Each node performs periodic local sensing to detect primary user signal and to derive primary user activity patterns. The probability of primary appearance on the current channel and the channel status can be obtained based on the periodic sensing. In addition, each node identifies the quality of the channel by message exchange through a common channel with neighbor nodes, then determines Link_Levels with neighbor nodes. In the proposed method, the Link Level condition reduces the number of control messages that are generated during the route discovery process. The proposed method can improve path life time by choosing a path through Path_Reliability in which stability and quality are weighted depending on the location. Through simulation, we show that our proposed algorithm reduces packet collisions and increases path life time in comparison with the traditional algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.312-317
• /
• 2015

Seafarers can confront to evacuate from the ship with many reasons such as collision, grounding and fire accident. It believes that evacuation time from ship is very important element in order to increase survival rate in the contingency circumstance, however narrow and complex structure of ship is one of obstacle element against prompt evacuation. Taking into consideration the unique structure of ship compared to the structure of other facilities, speed of fire propagation on board ship is faster than the same size of other type facilities. Therefore, measures to prompt evacuation are required. But it comes with the behavioral constraints of the crews and passengers of the nature of operating in a complex structure with narrow vessels. Therefore, in this study, we propose a formula to be analyzed by theoretical approach and simulation methods to improve the survival rate for the crew and passenger of the ship through the ship's structural modification. We analyzed the temperature rise and visibility which are the most influential effects on the life safety in the event of fire by using a three-dimensional analysis of sight-only program Fire Dynamic Simulator (FDS) as analytical tools.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.101-114
• /
• 2006

Recently due to the increase of cars and city life, the traffic congestion has worsened. It Is particularly worse in the center of the metropolis. Within the general public means, the public transport buses have the advantage of being more cheap, accessible and mobile. But as there is no separate lane for buses, the collision of cars and buses are creating damage to public service. In order to solve this situation, the bus priority signal system has been introduced to reduce the bus travel time and improve its services. The purpose of this study is to establish bus priority signal algorithm which builds bus efficiency under the real-time traffic signal control system and to analyze the effect of it. As the green time was calculated against real time (under the real-time traffic signal control system), compared to existing bus priority signal there was a reduction in cross street loss. The modified cycle was used to maintain signal progression. A case study was carried out using VISSIM simulation model. In result of this study, we found that there was a decrease in bus travel time despite some evidence of car delays and compared to existing bus priority signal the delay of dishonor could be reduced dramatically. The analysed result of person delay using MOE, is that there is evidence that when bus priority signal is in effect, the person delay is reduced.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.105-110
• /
• 2014

Korean government sets up a goal that jumps up to the third ranked powerful nation of offshore wind in the world until 2020 and announced "The plan for 2.5-gigawatt wind farm off the south-west coast by 2019". Such above, according to green energy policy, offshore wind farms(OWF) will be increased continuously. The development of OWF should be taken account of wind volume as well as marine traffic environment. Specially aids to navigation of OWF play a significant role in preventing collision between vessels navigating near waters and structures. For purpose of distinguishing OWF, IALA recommendations define installation of lights on SPS and IPS. However, there is no mention of light character that plays important role in identification of lights as marking offshore wind farm. Also the research on selection of proper light character has been insufficient state. Therefore in this paper, we analyzed internal and external regulations concerned marking with light on SPS and IPS in OWF. And suggested patterns and rhythms of light having not only easily recognized feature but also no confusion with other light of aids to navigation. The proposed light characters were verified by simulation, and the results were analysed that synchronism flickering of "Fl Y(4) 12s(SPS)" and "Fl Y 6s(IPS)" would be useful in combination of both lights.