• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.58-66
• /
• 2005

Usual human gait can be modeled as continual impact phenomenon that happens due to the topological change of the kinematic structure of the two feet. The human being adapts his own control algorithm to minimize the ill effect due to the collision with the environment. In order to operate a Humanoid robot like the human being, it is necessary to understand the physics of the impact and to derive an analytical model of the impact. In this paper, specially, we focus on impact analysis of the kicking motion in playing soccer. At the instant of impact, the external impulse exerted on the ball by the foot is an important property. Initially, we introduce the complete external impulse model of the lower-extremity of the human body and analyze the external impulses for several kicking postures of the lower-extremity. Secondly, a trajectory-planning algorithm of a ball, in which the initial velocity and the launch angle of the ball are calculated for a desired trajectory of the ball, will be introduced. The aerodynamic effect such as drag force and lift force is also considered. We carry out numerical simulation and experimentation to verify the effectiveness of the proposed analytical methodology.

• 한국전산구조공학회논문집
• /
• 제24권2호
• /
• pp.211-222
• /
• 2011

본 논문에서는 고준위폐기물 처분장에서 처분용기를 취급할 때 발생할 수 있는 운송차량에서 처분용기의 추락낙하 사고시 지면에 충돌할 때 지면으로부터 받는 충격력에 대하여 직경이 102cm인 가압경수로(PWR)용 처분용기에 대한 구조해석을 수행하여 처분용기의 구조적 안정성을 평가하였다. 이를 위하여 처분용기가 추락낙하하여 지면과 충돌 시에 처분용기가 받는 충격력을 구하기 위한 기구동역학해석을 상용 CAE 시스템인 RecurDyn을 이용하여 수행하였으며, 이와 같이 구한 충격력에 대하여 상용 유한요소해석 코드인 NISA를 이용하여 처분용기의 비선형구조해석을 수행하여 처분용기 내에 발생하는 응력 및 변형을 구하였다. 이를 바탕으로 처분용기가 처분장에서 취급 시 부주의로 운송차량에서 추락낙하 하는 경우 처분용기의 구조적 안전성을 평가하였다. 처분용기를 강체로 가정하고 기구동역학해석을 수행한 결과 처분용기는 지면과 두 가지 유형으로 충돌함을 알 수 있었고, 충돌 초기 지면으로부터 받는 충격력이 가장 크고 그 이 후 충돌 시에는 충격력이 점차로 감소함을 알 수 있었다. 안정적인 구조안전성 평가결과를 얻기 위하여 처분장에서 차량 운송 시 추락낙하 사고에서의 운송차량의 높이는 충분히 높은 5m로 가정하였다. 충격력에 대한 비선형구조해석은 추락낙하하여 가장 큰 값인 충돌 초기의 충격력의 크기를 가지고 비선형구조해석을 수행하였다. 해석결과 이송 중인 차량에서 추락낙하하는 경우 처분용기의 내부 주철삽입물에 주철의 항복응력보다 더 큰 응력이 발생하였으며, 이는 처분용기에 항복이 발생하여 경수로 처분용기의 구조적 안전성이 확보되지 못함을 보여주고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.217-222
• /
• 2001

The best method to evaluate crashworthiness of a trainset as a whole is to analyse one dimensional dynamic model composed of nonlinear dampers, springs and bars, and masses. In this study, crashworthiness of KHST was evaluated by analysing a nonlinear spring/bar-damper-mass model. The numerical results show that the KHST can easily absorb kinetic energy at lower impact force and acceleration in a heavy collision, when compared with KTX. Also, the KHST can be protected from any damage in its carbody and components except the prepared energy absorbing tube in a light collision, like a traint-to-train accident at speed under 8 kph. However, the KTX can be much damaged in the a light collision because there is no energy absorbing tube.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.634-639
• /
• 2004

Under light collision accidents, the energy absorption strategy for the coupler and expansion tube of the TTX(Tilting Train Express) initial design is established in the paper. Also, 1st shearing bolts are designed. When the absorbed energy of the coupler reaches its maximum, the connecting bolts between the coupler and the car body are sheared off not to transmit the impact force to the car body structure. To absorb more energy after the lst shearing bolts work, a expansion tube is designed conceptually and installed at the rear part of the coupler. Using Hyper-Mesh and LS-DYNA, pre/post processing and light collision analyses are preformed, respectively.

• Tribology and Lubricants
• /
• 제27권1호
• /
• pp.34-39
• /
• 2011

In this study, finite element analysis of particle-surface collision using 2-dimensional elements was performed to observe the effects of abrasive size and impact angle. The result of the simulation on the change in abrasive size revealed that larger abrasive particle induced larger contact stress due to force transfer through slurry fluid as the particle moved and pushed the fluid. This observation brought an important finding that the slurry fluid could make the workpiece surface soften and then change the mechanical properties of the surface layer such as elastic modulus and yield strength. As for the impact angle, it was found that the contact stress increased with the angle of impact and jumped up at a specific angle. Such result would be attributed to the complex effects of the impact velocity and angle.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.22-25
• /
• 2008

The dynamic response of the head arm assembly (HAA) of a hard disk drive to an impact load was obtained from a 3D non-linear finite element model using ANSYS/LS-DYNA and from experiments using a modified levitation mass method (LMM). In the finite element model, the impact load was created by modeling the mass as a rigid body and making it collide with the HAA. The velocity, displacement, acceleration, and inertial force of the mass were then obtained from the time history data of the finite element analysis. In the LMM, a mass that was levitated with an aerostatic linear bearing, and hence encountered negligible friction, was made to collide with the actuator arm, resulting in a dynamic bending test for the arm. During the collision, the Doppler frequency shift of the laser beam reflected from the mass was accurately measured with an optical interferometer. The velocity, displacement, acceleration, and inertial force of the mass were accurately calculated from the measured time-varying Doppler frequency shift. A good correlation between the experimental data and FEA results was observed. The FEA was also used to investigate the dynamic response of the HAA to impact by different masses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.714-714
• /
• 2005

This paper presents the modeling and impact analysis for a rotating cantilever beam having a concentrated mass. The concentrated mass takes an impact force during the rotating motion and the transient response of the beam induced by the impact is calculated by applying the Rayleigh-Ritz assumed mode method. The stiffness variation effect caused by the rotating motion is considered in this modeling. The effects of the concentrated mass size, impact position and the angular velocity of the beam on the transient responses are investigated through numerical studies.

• 한국전산구조공학회논문집
• /
• 제28권6호
• /
• pp.675-682
• /
• 2015

미국 AASHTO LRFD(AASHTO, 2012)나 국내의 도로교설계기준(2012)의 차랑충돌에 대한 교각설계기준을 참조하면 교각 설계 시 차량충돌에 대해 정적인 하중을 고려하도록 제시하고 있다. 한편 2003년 미국 네브래스카 주에 트럭이 교각에 충돌하여 교각 및 교량 상부구조가 붕괴되는 사고가 발생하는 등 차량충돌에 의한 교량붕괴사고는 홍수에 의한 교량붕괴사고에 이은 두 번째 요인으로 분류되기도 한다. 화물차량의 대형화와 도로시스템의 개선으로 인하여 이러한 사고가 발생할 가능성이 중가하고 있다고 볼 수 있다. 본 연구에서는 교각 설계시 차량충돌에 대한 동적 해석을 수행하게 되면 많은 비용과 시간이 소요되어 실용적인 측면에서 연구결과가 쉽게 반영되지 못하고 있으므로 충돌해석 비용과 시간을 저감할 수 있는 모델축소법(model reduction)을 이용한 해석방법을 개발하였으며 그 효용성을 최종변위에 대해 직접충돌해석결과와 비교함으로써 평가하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.191-198
• /
• 1994

The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER Ⅶ program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum deflection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guradrail to prevent from disastrous traffic accidents.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.25-28
• /
• 1999

In this article, a new performance index is proposed to re-duce the collision impulsive force by controlling the null motion of redundant manipulators. First, we define the normalized impact ellipsoid in the viewpoint of instantaneous velocity change. Then, we propose a new impact performance index based on velocity direction for null motion to reduce initial impulsive effects. It gives some advantage for the case of unknown environment. The optimization of this index is that the successional impact forces are reduced. The performance of the proposed index is demonstrated by simulation study.