• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.427-436
• /
• 2015

This study analyzes the factors effecting on pedestrian crossing behavior in the unsignalized intersection. Pedestrian crossing behavior is the results of mental stress defined as a combination of environment perception, avoiding accidents, halting collision, and instant crossing decision. It is necessary to make walkable intersection in cities through relieving this stress influenced by personality, traffic condition, and roadway environment. The purpose of study is empirically to examine the crossing behavior such as crossing satisfaction, crossing trial frequency and waiting time based on various factors effecting on crossing intersection by video and questionnaire survey. The $x^2$-test is applied to analyze the characteristics of crossing trial frequency according to each factor. Also, the hazard rate model is established to find the factors effecting on waiting time for crossing. Finally, the direct and indirect effects on the pedestrian crossing satisfaction are presented as the results of LISREL.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.97-105
• /
• 2010

An All-red clearance interval(AR) has been operating with amber signal in order to avoid collision between vehicles which cannot come out of the intersections, vehicles coming in from the opposite direction, and pedestrians(bicycles) on the crosswalk during the signal conversion time at the intersections. Foreign nations have been analyzing AR's influences of traffic accidents. On the other hand, the similar research has not been conducted in the country. The objective of this paper, therefore, is to analyze the safety at the intersections with respect to the installation of AR through the hypothesis test. A before-and-after analysis has been performed for 10 intersections where applied AR. From the 95% of significance level, the results of Non-parametric Test show that the installation of AR improves a safety at the intersections. The results indicates that AR discharges vehicles passing through the intersections and control entering vehicles at the intersections.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.29-36
• /
• 2017

Recently, KTX (Korean Train Express) train stoppage accidents were mainly caused by malfunctioning equipment, aging and cracking of railway vehicles, crack breakages of brake disks, and breakages of brake disks. Breakage of brake disk can cause large-scale casualties such as high-speed collision and concern about derailment by hitting lower axle and wheel. Therefore, in this study, a brake disk with solid and ventilation type, which is the brake disk of a KTX train was modeled, and a dynamometer system was constructed to operate the disk. A Rayleigh wave was used to inspect the surface of the brake disk. An ultrasonic inspection module was developed for the brake disk by using a local immersion method due to the difficulty involved in ultrasonic inspection using an existing immersion method. In addition, the surface defects of the brake disk were evaluated using a dynamometer mock-up system and an ultrasonic inspection module of the brake disk.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.504-510
• /
• 2018

Marine casualties are caused mainly by collisions and grounding, due to human error. The SMART Navigation Service is preparing a measure to reduce marine casualties caused by human error and establish an LTE Accident Vulnerability Monitoring System (SV10) to evaluate the danger of collision or grounding for a vessel based on location information collected on land. This service will also share real-time vessel locations and danger information with related agencies to enable them to respond more quickly to accidents on land. In this study, statistical reports on marine casualties and investigation reports provided by the Korea Maritime Safety Tribunal are analyzed, so the percentage of marine casualties that could be reduced using the SV10 service could be identified.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.89-99
• /
• 1994

The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER VII program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum defection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guardrail to prevent from disastrous traffic accidents.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1860-1866
• /
• 2016

Helicopter-related collision accidents with structures mostly occur at landing, especially in a limited visibility environment, which necessitates some secondary equipment like a radar that can generate stationary clutter image. In this paper, we propose an algorithm that makes an image of stationary ground clutter in two dimensional range and azimuth angle domain. We present a mathematical model for the received signals from each clutter patch in the iso range ring and analyze their clutter and Doppler characteristics, assuming that a helicopter-borne radar has a rotational antenna. We propose a filter structure, which suppresses side lobe signal components while extracting a main lobe signal component, and suggest a solution for a problem stemmed from the filtering process. Finally, by conducting a simulation we show the performance of the suggested imaging algorithm on a two dimensional virtual scenario of the topographic clutter.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.251-257
• /
• 2011

When designing a ship, ergonomic considerations are crucial when minimizing a navigator's fatigue due to the burden of work, and to appropriately operate the navigational equipment for each given situation by helping the operator to understand the surroundings as well as the physical functions of the ship. However, insufficient consideration of ergonomic elements in the actual design of ship Bridges is lowering the performance of safe navigation and allows for the possibility of operation or readout errors. Consequently, these errors lead to an increase in maritime accidents. Therefore, this study conducted a usability evaluation on the importance of and the usage frequency of navigational equipment, their influence on actual navigation, and the possibility of error upon operation or readout between training ship officers, to derive an optimized layout that includes the consideration of ergonomic factors for on-Bridge navigational equipment, which are currently arranged differently according to their type or size. The optimized layout of on-Bridge navigational equipment was carried out based on the evaluation results, using the Lingo program. Through the process of optimization, revised layouts of on-Bridge navigational equipments(control and display device) were suggested, considering emergency situations(ship collision, stranding, fire and explosion, sinking, etc.) during navigation.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.48-55
• /
• 2010

The many vessels are built with FRP(Fiber-Reinforced Plastic) material for small boats and medium vessels. However, FRP is impossible to be used for recyclable material owing to environmental problems and causes large proportion of collision accidents because radar reflection wave is so weak that large vessels could not detect FRP ships during the sailing. Hence, Al alloy comes into the spotlight to solve these kinds of problems as a new-material for next generation instead of FRP. Al alloy ships are getting widely introduced for fish and leisure boats to save fuel consumption due to lightweight. In this study, it was selected 6061-T6 Al alloy which are mainly used for Al-ships and carried out various electrochemical experiment such as potential, anodic/cathodic polarization, Tafel analysis, potentiostatic experiment and surface morphologies observation after potentiostatic experiment for 1200 sec by using the SEM equipment to evaluate optimum corrosion protection potential in sea water. It is concluded that the optimum corrosion protection potential range is -1.4 V ~ -0.7 V(Ag/AgCl) for 6061-T6 Al alloy, in the case of application of ICCP(Impressed current cathodic protection), which was shown the lowest current density at the electrochemical experiment and good specimen surface morphologies after potentiostatic experiment for Al-Mg-Si(6061-T6) Al alloy in seawater environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.61-66
• /
• 2006

It have been known that the probability of occidental happening in towing-barge is higher than that of other merchant vessels. Bemuse the towing-barge is restricted in thier manoeuvring ability due to its towingline. A report from ministry maritime affairs and fisheries said that the rate of collision occident for towing-barge is 40% high than other transport system in sea A number of researches have been carried out to improve the safety policy in the towing-barge sea transportation system by the gorvenment. This study examined the safety status in domestic towing-barge sea transportation system The registration status, safety operational policy and past occidental data were also examined A survey research of experts relating to towing-barge operation also was carried out to fine the detailed of safety status. This study would be applicable to set up safety policy for towing-barge marine transportation system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.192-197
• /
• 2003

A virtual vessel traffic control system is introduced to contribute to prevent a marine accident, e.g. ship collision or stranding. from happening. The system that comes from VTS limitaions, consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress (here, INOUE model used) based on the satellite data. Remotely sensed data cab be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If in the future, e.g. 5-minute after, environmental stress values that a ship may encounter on a voyage can be available, proper actions can be taken to prevent accidents. It lastly can be shown that JERS satellite data are used to track ships and extract their information.