• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.191-198
• /
• 1994

The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER Ⅶ program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum deflection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guradrail to prevent from disastrous traffic accidents.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.54-61
• /
• 2013

Although typically classified as AIS 1, whiplash injuries continue to represent a substantial social problem with associated costs estimated at over $1 billion annually. The primary objective of this study was to determine the effects of seat positions(seatback angle, headrest height) on risk for whiplash injury in very low speed(${\Delta}V$=4~10km/h) rear-end impact. To accomplish this, rear impact seat carriage tests and simulations were conducted using the BioRID-II dummy seated in a mass production seat, which allowed for the adjustment of seatback angle and headrest height. Neck injury criteria(NIC, Nkm) were then compared for different ${\Delta}V$ and seat positions.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.130-138
• /
• 2000

The position of the automobile seat back is very important for the neck injury in the rear-end collisions. The effects of the position have been evaluated experimentally. A sled simulator is utilized with a velocity of 33 km/h. The position is varied by the angle of seat back from 25 to 65 degrees. All the configurations of the seat are fixed except the angle. The neck injuries are calculated by the equations accepted in the industries. Also, the sled tests with other velocities are carried out for the comparison study. Using the results of the test, the effects of seat back strength are discussed to minimize the occupant neck injury in rear end collisions.

• 수산해양기술연구
• /
• 제42권2호
• /
• pp.111-118
• /
• 2006

It is indispensable to grasp the turning ability of a ship to operate her effectively. For this purpose, the author measured the turning ability of training ship, A-RA by use of bow thruster and stem rudder. The turning ability of this ship, in case of using both of stem rudder and bow thruster at the same time, caused by increase of steering angle provides more influence to the size of tactical diameter than it caused by the power of bow thruster. But the influence of bow thruster on the turning ability is available only within rudder angle $5^{\circ}\;-\;10^{\circ}$, so it is possible to grasp that the effect of bow truster is reduced as rudder angle become bigger. In case of the influence of bow thruster by her speed, the ability of bow thruster is very effective at low speed, but it is almost not available in normal turning speed. Therefore, the using both of stem rudder and bow thruster can be useful in case of low speed proceeding at entrance or departure of the narrow waterway or inside port which sea traffic is congest for collision avoidance.

• 한국분무공학회지
• /
• 제12권1호
• /
• pp.58-64
• /
• 2007

The spray characteristics of the oxidizer-rich preburner are investigated. This system is generally operated at an oxidizerfuel mixture ratio of 50. The spray quality and mixing performance are very important for safe combustion. To know the spray characteristics of the oxidizer-rich preburner, we have designed various swirl injectors and measured droplet velocity and size by the PDPA system. The flow discharge coefficient of the fuel orifice is $0.12{\sim}0.21$, oxidizer orifice discharge coefficient is $0.16{\sim}0.28$. From the spray visualization, fuel nozzle spray angle is $15^{\circ}{\sim}25^{\circ}$, oxidizer nozzle spray angle is $65^{\circ}{\sim}85^{\circ}$ and combined spray angle is reduced $2^{\circ}{\sim}5^{\circ}$ compared to the oxidizer nozzle only case. From the PDPA measurement, droplet SMD is $175\;{\mu}m$ at 50 mm and $190\;{\mu}m$ at 100 mm of variant 1 combined case. The number concentration measurement revealed the reason of the droplet diameter increasement with distance. That is due to drop coalescence results from collision of drops which is occurred in dense sprays at a long distance from nozzle orifice exit.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.782-789
• /
• 2010

It is important to satisfy the requirements and standards for the protections of passengers in a car accident. There are lots of studies on the crushing energy absorption of a structure member in automobiles. In this paper, we have studied to investigate collapse characteristics and moisture absorption movements of CFRP( carbon fiber reinforced plastics) structure members when CFRP laminates are under the hygrothermal environment. In particular, the absorbed energy, mean collapse load and deformation mode were analyzed for CFRP members which absorbed most of the collision energy. Also, variation of stacking angle is important to increase the energy absorption capability. The purpose of this study is to evaluate the strength reduction and moisture absorption behavior of CFRP hat shaped member. Therefore we have made a impact collapse experiment to research into the difference of absorbed energy and deformation mode between moisture absorbed specimen and non-moisture absorbed. As a result, the effect of moisture absorption and impact loads of approximately 50% reduction in strength are shown.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권1호
• /
• pp.1-4
• /
• 2015

본 논문에서는 주어진 채널이 변형될 때, 아미노산들의 유효한 사이드 체인 배치(side chain conformation)를 찾는 알고리즘을 제시한다. 제안된 알고리즘은 아미노산의 유연성에 근거하여 사이드 체인 유연성을 가진 단백질 분자를 구현하고, 채널 변화에 영향을 주는 인접 아미노산(adjacent amino acid)을 추출한다. 인접 아미노산과 이웃(neighbor) 아미노산의 충돌 검사를 수행하여 유효하지 않은 사이드 체인 배치를 제거한 후, 회전각 조합 트리(rotation angle combination Tree)를 구성하여 사이드 체인 배치 중 유효한 것들만을 추출한다.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.47-54
• /
• 2017

This study examines the implementation of a kinematic machining tool to evaluate the interference and collision phenomenon of 5-axis machining of wing ribs from airplanes, particularly for a large-size model airplane. We develop a machine simulation model of a parallel kinematic machining tool that can operate in a virtual space, which is equivalent to the authentic conditions in the field. The investigation of the simulation function elements indicates the necessity to generate the 6-axis machining, which attaches an angle head to the main axis of the machine. Using an NC program for the wing ribs, we attempt to verify the correspondence and conformity between the machine simulation model and the actual equipment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.255-259
• /
• 2008

This paper presents the spray characteristics of the oxidizer rich preburner injector which can be used in the high-thrust rocket system. We designed the basic shape of the liquid-liquid coaxial swirl injector for the rocket oxidizer rich preburner injection system. To understand the spray angle variation with the high pressure environment, the spray visualization in the high pressure chamber was preformed. Also we measured the droplet velocity, the Sauter Mean Diameter(SMD), the volume flux and the number density with the PDPA system by using water in atmospheric pressure. The results show that the spray angle is reduced by increasing ambient pressure and maximum droplet velocity is shown from a nozzle tip and then the droplet velocity decreases as a spray moves to the downstream. The SMD decreases on the axial distance from 20 mm to 50 mm but it increases over 50 mm. That is due to the increasing number of collision with each droplet and interaction with ambient air on going downstream direction.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.150-154
• /
• 2022

선박의 항적 및 선박 간 충돌 가능성을 평가하기 위해 선박자동식별시스템(AIS)이 중요하게 활용되고 있다. 하지만 전송 주기에 대한 한계로 인해 실시간 정보 제공이 어렵다. 이를 개선하기 위한 대부분의 연구는 이상적인 데이터를 기반으로 진행되어, 실제 상황에 대응하기 어려운 문제가 있다. 따라서 본 논문에서는 실상황에서의 실시간 정보 제공을 위해서, 항적의 유형에 따라 선회각을 반영한 이산 칼만 필터 기반 위치 추정 방법을 제안한다. 또, 실제 데이터를 사용한 실험을 통해서 제안 알고리즘에 대한 정확도 평가를 진행한다.