• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.726-735
• /
• 2003

A Process of 3-D Particle image velocimetry, called here, as '3-D volume PIV' was developed for the full-field measurement of 3-D complex flows. The present method includes the coordinate transformation from image to camera, calibration of camera by a calibrator based on the collinear equation, stereo matching of particles by the approximation of the epipolar lines, accurate calculation of 3-D particle positions, identification of velocity vectors by 3-D cross-correlation equation, removal of error vectors by a statistical method followed by a continuity equation criterior, and finally 3-D animation as the post processing. In principle, as two frame images only are necessary for the single instantaneous analysis 3-D flow field, more effective vectors are obtainable contrary to the previous multi-frame vector algorithm. An Experimental system was also used for the application of the proposed method. Three analog CCD camera and a Halogen lamp illumination were adopted to capture the wake flow behind a bluff obstacle. Among 200 effective particle s in two consecutive frames, 170 vectors were obtained averagely in the present study.

• 전자공학회논문지A
• /
• 제30A권11호
• /
• pp.40-47
• /
• 1993

In this paper, a method for analyzing coaxial collinear antenna for base station of mobile communications using the moment method and the transmission line theory is presented. The excited voltages at the junctions between elements are expressed as the matrix with transmission parameters and these voltages are applied to the integral equation for calculating current distribution. Here, the current distributions, input admittances, radiation patterns and gains are calculated. Calculated values of the current distributions and the input admittances show good agreement with measured values. In case of beamtilted collinear antenna, radiation pattern is simialar to measured result except side lobe.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1275-1289
• /
• 1996

The plane elasticity problem of collinear cracks in a layered medium is investigated. The medium is modeled as bonded structure constituted from a surface layer and a semi-infinite substrate. Along the bond line between the two dissimilar homegeneous constituents, it is assumed that as interfacial zone having the functionally graded, nonhomogeneous elastic modulus exists. The layered medium contains three collinear cracks, one in each constituent material oriented perpendicular to the nominal interfaces. The stiffness matrix formulation is utilized and a set of homogeneous conditions relevant to the given problem is readily satisfied. The proposed mixed boundary value problem is then represented in the form of a system of integral equations with Cauchy-type singular kernels. The stress intensity factors are defined from the crack-tip stress fields possessing the standard square-root singular behavior. The resulting values of stress intensity factors mainly address the interactions among the cracks for various crack sizes and material combinations.

• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.291-301
• /
• 1999

원하는 역산란 패턴을 만족시키는 일차원 비선형 분포함수를 합성하는 방법을 제안하였다. 이 방법은 일차 원 역산란 문제로부터 유도된 Riccati 방정식의 해의 역변환에 기본을 두고 있다. 그 해는 collinear 배열 안테 나에서의 배열인자 혹은 정규화된 공간인자와 유사한 형태를 가지므로 연관된 비선형 분포함수를 구하기 위 해 line-source 법에 입각한 패턴 합성법을 사용하였다. 이 과정들은 최적화 기법에 의해 수행되며, 분산특성 을 갖는 매질내에서 임의의 전송선로를 특정 주파수 대역내에서 합성하는 예와 저항성 스트립의 산란패턴 제어 등의 예로부터 제안한 방법의 타당성을 수치적으로 입증하였다.

• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.27-32
• /
• 2017

In this paper we consider the two tangent lines of isogonal and isotomic conjugates of the line at both vertices of a given triangle. We find the necessary and sufficient condition for the two tangent lines of isogonal or isotomic conjugates of the line at both vertices and the median line to be concurrent. We also prove that every line whose isogonal conjugate tangent lines at both vertices are concurrent with the median line intersects at a unique point. Moreover, we show that the three intersection points correspond to the vertices of triangle are collinear.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1836-1839
• /
• 1997

This paper presents machine vision technique with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is, the optical centers of lens elements are not strictly collinear. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.179-185
• /
• 1997

This paper presents machine vision technique with a camera modeling that accounts for major sources of camera distortion, namely,radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to varios degrees of decentering,that is,the optical centers of lens elements are not strictly collinear. Thin prism distortion arises form imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of and to apply the line of part manufacturing.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.70-76
• /
• 1996

In the Stereolithography process, three-dimensional objects are built by sequentially curing, generated by horizontal slicing of a three-dimensional CAD model. The dimensional accuracy of a menufactured part depends on the accuracy of curing performed by laser beam radius and the half of curing width. When offsetting, some slices have collinear segments, coincident vertices, line jerks and open loops. After remove above issues we have correct offsets data. And in last step, these data are used to scan paths.

• 한국정보통신학회논문지
• /
• 제24권10호
• /
• pp.1355-1360
• /
• 2020

지도에서 특별한 지형지물에 이름이나 설명문에 해당하는 레이블을 붙이는 것을 지도 레이블링(map labeling)이라고 한다. 본 논문에서는 직선상에 n개의 점들이 주어지고 점들에 대한 직사각형의 레이블을 위치시키는 문제를 다룬다. 특별히 레이블들의 높이는 모두 같고, 점들이 위치한 직선의 위쪽에 아래 변들이 모두 동일 선 위에 위치하도록 놓는다. 그리고 점과 레이블을 꺾은선으로 연결하고 이것을 지시선이라 부른다. 지시선은 수직선만으로 구성된 직선 지시선과 수직선, 수평선, 수직선으로 구성된 꺾인 지시선으로 나뉜다. 문제는 꺾인 지시선의 수를 최소화하도록 레이블을 위치시키는 것이고, 우리는 O(nlogn) 시간 알고리즘을 제안함으로서 [13]에서 제안한 O(n2) 시간 알고리즘을 개선한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1617-1620
• /
• 1997

This paper describes the camera caliberation based-neural network with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distoriton causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing. The performance of proposed camera aclibration is illustrated by simulation and experiment.